Electrónica y PCB

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200-208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 40A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.08 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys K control relay, 4 contacts (2NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V DC control circuit with no inrush consumption, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

Los contactores TeSys D han sido diseñados para una perfecta integración en los sistemas de control. Se pueden utilizar para crear arrancadores de motor para casi cualquier tipo de aplicación. Los contactores TeSys D están disponibles en 13 clasificaciones de contactores para aplicaciones de motores inductivos de hasta 150 amperios de carga completa y cargas resistivas de hasta 200 amperios. Este contactor IEC inductivo de 3 polos de 40 A se puede montar en riel DIN o montar directamente en un panel. Los contactores tienen una potencia de potencia y una potencia de motor de Kw para su aceptación internacional. El contactor está clasificado para 10HP a 200 a 208VAC, 10HP a 240VAC, 30HP a 480VAC y 30HP a 600VAC trifásico. El contactor también está clasificado para 3HP a 115VAC y 5HP a 240VAC monofásico. Cuando se usa con un disyuntor de 480 VCA hasta 110 A, este contactor puede tener un SCCR de hasta 100 kA. Cuando se usa con un fusible de hasta 600 VCA 90 A Clase J o CC, este contactor puede tener un SCCR de hasta 100 kA. El contactor se suministra con una bobina de 230 VCA 50/60 Hz. El contactor tiene un contacto auxiliar normalmente abierto y otro normalmente cerrado incorporados de serie. El contacto NC está certificado como espejo. Los terminales de abrazadera de tornillo se utilizan para conexiones de carga y auxiliares. Una amplia línea de accesorios facilita el cumplimiento de los requisitos de la mayoría de las aplicaciones. El contactor mide 4.80 pulgadas de alto, 2.17 pulgadas de ancho y 4.72 pulgadas de profundidad. Pesa 1.87 lbs. El contactor está certificado según las normas UL, CSA, IEC, CCC, EAC y marinas. Contactor también cumple con los requisitos de RoHS / REACh, lo que lo convierte en un producto Green Premium.

The Siemens 3TH4293-0BB4 DC Control Relay is a robust solution designed for reliable operation in various industrial applications. This 44E model complies with DIN EN 50011 standards, ensuring high quality and performance. The relay features 4 Normally Open (NO) and 4 Normally Closed (NC) contacts, allowing it to handle a wide range of control tasks.The relay is equipped with screw terminal connections for easy installation and maintenance. It operates at 24V DC, making it compatible with a variety of power sources. The relay's overlapping contactor design ensures efficient operation and reliable switching, even under demanding conditions.

The Schneider Electric TeSys Deca relay is a reliable and durable solution for controlling electromagnetic loads. It features 5 normally open (NO) contacts, each rated at 10A/690V. This makes it suitable for a wide range of applications, including AC-15/DC-13 control.The relay operates on a 24V 50/60Hz AC control circuit, with screw clamp terminals for easy connection. It can handle high operating rates up to 180 cycles per minute and is designed to operate in ambient temperatures ranging from -40°C to +60°C.The TeSys Deca relay is compact, measuring just 45mm in width, making it suitable for clipping onto a 35mm DIN rail or fixing with screws. It is also certified under multiple standards (IEC, UL, CSA, CCC, EAC, Marine) and is a Green Premium product, complying with RoHS/REACh regulations.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 150A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 300A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200-208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 40A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.73 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a low consumptioon 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200 to 208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.98 inches deep. It weighs 1.08 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 150A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 300A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca contactor is designed for seamless integration into control systems, providing reliable motor starters for various applications. It's available in 13 different ratings, catering to inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps. This specific model is a 32A inductive 3-phase IEC contactor. It can be mounted on DIN rail or directly on a panel, making it versatile for different installation needs. The contactor boasts both Horsepower and Kw motor ratings, ensuring international acceptance. The contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC, and 30HP at 600VAC three-phase. For single-phase applications, it can handle 2HP at 115VAC and 5HP at 240VAC. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR of up to 85kA. With a Class J or CC fuse rated up to 600VAC and 80A, the SCCR can reach up to 100kA. The contactor comes with a 115 VAC 50/60 Hz coil. It has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified, ensuring reliable operation. Screw clamp terminals are used for load and auxiliary connections, providing secure and efficient connectivity. An extensive range of accessories makes it easy to meet the requirements of most applications. The contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth. It weighs 0.83 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 40A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 30HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 5HP at 240VAC single phase. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 2.04 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca contactor is designed for seamless integration into control systems. It can be used as a motor starter in various applications. This 40A inductive 3 pole IEC contactor is available in multiple contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This contactor can be mounted on DIN rail or directly to a panel. It has both Horsepower and Kw motor rating for international acceptance. The contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 30HP at 480VAC and 30HP at 600VAC three phase. It is also rated for 3HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 90A Class J or CC fuse, this contactor can have a SCCR up to 100kA. The contactor is supplied with a 240 VAC 50/60 Hz coil. The contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. It also meets the requirements of RoHS/REACh making it a Green Premium product.

The GMVSTBW 2.5/4-STF-7.62 is a robust female PCB connector that offers a nominal cross section of 2.5 mm² and a color-coded green finish. This connector is designed to handle a nominal current of 12 A with a rated voltage (III/2) of 630 V, ensuring safe and reliable electrical connections.The contact surface of the connector is made from tin, providing excellent conductivity and durability. The connector features four potentials arranged in one row with four positions and four connections, making it suitable for a wide range of applications. The pitch between the contacts is 7.62 mm, ensuring precise alignment during installation.The GMVSTBW 2.5/4-STF-7.62 connector uses a screw connection with a tension sleeve and an L Slotted screw head form for secure attachment. The conductor/PCB connection direction is -90°, allowing for easy installation. The connector also includes a locking clip for added security.This PCB connector is part of the GMVSTBW 2.5/..-STF product range and is compatible with the COMBICON MSTB 2.5 plug-in system. It features screw locking and mounting via a screw flange, ensuring stable installation. The connector is packed in cardboard for safe storage and transportation.

VM4 is a mechanical interlock unit designed for the interlocking side-by-side without additional width of two 3-pole or 4-pole AF09...AF38, AFC09...AFC38, AFS09...AFS38 contactors. When mounted between two contactors, the VM4 mechanical interlock unit prevents one of the contactors from closing as long as the other contactor is closed. The mechanical interlock unit VM4 includes 2 fixing clips (BB4).

The TeSys Giga high power contactor is designed for demanding applications, offering exceptional performance and reliability. This 3-pole (3 NO) contactor is suitable for AC-3 applications up to 400A and 250kW at 440V. It features a 100-250V AC/DC wide band low consumption electronic coil and an embedded highly reliable 1NO+1NC auxiliary contact block (17V 1mA). With a maximum operating rate of up to 600 cycles per hour and the ability to function in environments up to 60°C, this contactor ensures high reliability and durability with a mechanical durability of 5 million cycles.Key Features:Local Contact Wear Diagnosis (CWD) with continuous monitoring and healthy/alarm indicatorsReplaceable switching module for extended contactor lifeEasy maintenance without removing cables/busbarsDirect mounting of OLR below the contactorIP2x protection on the front face with shrouds conforming to IEC 60529 and VDE 0106Operation in ambient air temperatures from -25°C to 60°CDirect mounting on a plate with no derating up to 3000m altitudeCompact size for panel space savingsMulti-standard certified (CE, CB, CCC, cULus, EAC, KC, RCM, Marine) and Green Premium compliant (RoHS/Reach)Applications:Ideal for demanding applications such as power switching and motor control in various industries, including manufacturing, energy, and infrastructure. The TeSys Giga contactor is designed to handle high power loads with maximum efficiency and reliability, making it perfect for environments that require robust and durable solutions.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 220 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys K contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V). It provides a low consumption 24V DC coil with transient suppressor module, 1NO built-in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The TeSys D contactor is a highly versatile and robust component designed for seamless integration into control systems, enabling the creation of motor starters for a wide range of industrial applications. This specific model is a 150A inductive, 3-pole IEC contactor, part of a comprehensive range available with ratings up to 150 full-load amps for inductive motor applications and 200 amps for resistive loads.

The LC1K0610F7 is a 3-pole TeSys K contactor from Schneider Electric, designed for simple motor applications rated up to 2.2kW@400V. This compact device measures only 45mm in width and is compatible with DIN-rail and panel mounting.Featuring a 110V 50/60Hz AC coil and a built-in auxiliary contact, the LC1K0610F7 offers control circuit compatibility with both 50Hz and 60Hz supplies. It is also RoHS/Reach certified and complies with multiple standards including IEC, UL, CSA, CCC, EAC, and Marine.The LC1K0610F7 can be complemented with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K), making it an ideal solution for simple power applications.