Electrónica y PCB

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 48 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 5.51 inches deep. It weighs 4.06 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys K Contactors: The Schneider Electric TeSys K contactor is a versatile and reliable solution for non-inductive load control applications. With a capacity of up to 20A/690V AC-1, this compact (45mm width) device offers a 24V 50/60Hz AC coil without built-in auxiliary contact, ensuring optimal performance and flexibility. Featuring connection by screw clamp terminals, the TeSys K contactor is designed for operating rates of up to 600 cycles per hour and can withstand environments up to 50°C. Its multi-standard certification (IEC, UL, CSA, CCC, EAC) and Green Premium compliance (RoHS/REACh) make it a reliable choice for standard applications. Key Features: 2 poles (NO + NC) Up to 20A/690V AC-1 capacity 24V 50/60Hz AC coil without built-in auxiliary contact Compact design (45mm width) DIN-rail mounting or screw fixing Multi-standard certified (IEC, UL, CSA, CCC, EAC) Green Premium compliant (RoHS/REACh)

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a low consumptioon 48 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LP2K1201BD is a compact 3-pole TeSys K reversing contactor from Schneider Electric for motor applications. Rated 12A AC-3 5.5kW@400V, it includes a 24V DC coil, 1NC auxiliary contact, a mechanical interlock and a pre-wired reversing circuit. LP2K1201BD is a 3-pole TeSys K reversing contactor from Schneider Electric for simple motor applications rated up to 5.5kW@400V. Very compact, DIN-rail compatible, it is assembled with a mechanical interlock and a pre-wired reversing circuit. It can be easily integrated into all control systems thanks to its 24V DC coil and 1NC built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Ready for connection to all control systems thanks to a 24V DC control voltage and 2NC built-in auxiliary contact. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

The IEC Power Contactor, Sirius Standard 3 Pole Non-Reversing, is a robust electrical component designed for high current applications. With a rating of 265A, it operates at a voltage range of 110-127V AC/DC. This contactor features a 3-pole design with two normally open (NO) and two normally closed (NC) auxiliary contacts. The frame size is S10, and the busbar connections are conventional screw terminals. The contactor is UL listed under File E31519 in Vol.11 Sec. 3, ensuring compliance with safety standards.

This TeSys D contactor has been designed for motor control in railway applications. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product. Contactor is also compliant with the railway European standard EN 45545 R22HL3.

TeSys Giga high power contactor, 3 poles (3 NO) for category AC-3 applications up to 265A 160kW@440V. It provides a 48-130V AC/DC wide band low consumption electronic coil and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 290mm x 140mm x 209mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.

The TeSys Deca Series of IEC Contactors is engineered for optimal integration into control systems. These contactors are suitable for a wide range of applications, from small to large motor starters.The series offers 13 different contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific model, rated at 9A, is designed for 3-phase operation.The contactors can be mounted on DIN rail or directly onto a panel. They are equipped with both Horsepower and Kw motor ratings for international acceptance. The contactor's ratings include 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC, and 60HP at 600VAC for three-phase applications. For single-phase applications, it is rated at 7.5HP at 115VAC and 15HP at 240VAC.When paired with a 480VAC up to 35A circuit breaker, the contactor can handle short-circuit currents (SCCR) up to 85kA. When used with a 600VAC 25A Class J or CC fuse, it can handle SCCR up to 100kA.This contactor comes with a 12 VDC coil and a transient suppressor module. It also features one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. Load and auxiliary connections are made through screw clamp terminals.The contactor measures 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth, weighing 0.71 lbs. It is UL, CSA, IEC, CCC, EAC, and Marine certified, and meets RoHS/REACh standards, making it a Green Premium product.

Power contactor. AC-3 225 A. 110 kW / 400 V Coil AC 50/60 Hz and DC 200-277 V x (0.8-1.1) F-PLC input 24 V DC 3-pole size S10 Auxiliary contacts 2 NO + 2 NC Main circuit: Busbar Control and auxiliary circuit: screw terminal

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 95A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 440 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca IEC Contact Relay is an advanced solution designed for seamless integration into control systems. This contactor can be utilized to create motor starters for a diverse array of applications, making it a versatile choice. The TeSys Deca IEC Contact Relay is available in 13 different contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific model, rated at 95A for inductive loads, can be mounted on DIN rail or directly onto a panel. This contactor boasts both Horsepower and Kw motor rating for international acceptance. It is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC, and 60HP at 600VAC three-phase applications. Additionally, it can handle 7.5HP at 115VAC and 15HP at 240VAC single-phase loads. The contactor is equipped with a 220 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified, and screw clamp terminals are used for load and auxiliary connections. The TeSys Deca IEC Contact Relay measures 5.00 inches in height, 3.35 inches in width, and 5.12 inches in depth, weighing approximately 3.55 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh, making it a Green Premium product.

TeSys K control relay, 4 contacts (4NO), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 230-240V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

The D-Sub 1 Female Connector, designed with a solder cup termination, offers a robust solution for electrical connections. It's rated to handle up to 2A of current, making it suitable for various applications requiring high current capacity.Constructed from thermoplastic resin filled with glass fibers (PBTP), this connector ensures durability and resistance against environmental factors. The steel body is further enhanced by a nickel plating, providing additional protection against corrosion and wear.This D-Sub 1 Female Connector boasts 15 contacts made from copper alloy, ensuring reliable electrical conductivity. Its compact size makes it ideal for applications where space is limited.

D-SUB connector, degree of protection: IP67, number of positions: 9, material: PA, connection method: Screw connection, connection cross section: AWG 26- 16, cable outlet: angled, with integrated termination resistor, housing size: 1, color: gray, PROFIBUS

The AF305-40-11-13 is a robust contactor designed for controlling motors up to 160 kW / 400 V AC and switching power circuits up to 500 A (AC-1) or 350 A UL general use. This 4 pole device features pre-mounted auxiliary contacts and Main Circuit Bars, making it versatile for a wide range of applications.The AF technology incorporated in this contactor offers a wide control voltage range (100-250 V 50/60 Hz and DC), enabling it to manage large control voltage variations. This feature not only reduces panel energy consumption but also ensures distinct operations in unstable networks.The AF305-40-11-13 contactor is built with surge protection, providing a compact solution for your needs. Its block type design allows for easy extension with add-on auxiliary contact blocks and a wide range of accessories, enhancing its functionality and adaptability.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The Schneider Electric TeSys D contactors are designed for seamless integration into control systems. These versatile contactors can be used to create motor starters for a wide range of applications.Available in 13 contactor ratings, the TeSys D contactors cater to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific model, rated at 95A for inductive loads, is ideal for 3-phase power distribution.This IEC contactor can be mounted on DIN rail or directly onto a panel. It boasts both Horsepower and Kw motor ratings for international acceptance. The contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC, and 60HP at 600VAC three-phase power.For single-phase applications, the contactor is rated for 7.5HP at 115VAC and 15HP at 240VAC. The contactor comes with a 110 VAC 50/60 Hz coil. It features one normally open and one normally closed auxiliary contact as standard.The contactor measures 5.00 inches in height, 3.35 inches in width, and 5.12 inches in depth, weighing 3.55 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications.The contactor also meets RoHS/REACh standards, positioning it as a Green Premium product.

TeSys D Green contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 40A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 30HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 90A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Equipped with an electronic coil, wide band voltage 100-250V, AC/DC compatible, low consumption. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 2.19 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.