Fuentes de alimentación

Módulo de potencia SINAMICS G120 PM250 con filtro integrado clase A, posibilidad de regeneración 3AC380-480V +10/-10%, 47-63HZ, salida de alta sobrecarga 15KW para 200% 3s, 150% 57s, 100% 240s, temperatura ambiente -10 a +50 grados C, salida de baja sobrecarga 18,5KW para 150% 3s, 110% 57s, 100% 240s, temperatura ambiente -10 a +40 grados C, 512 x 275 x 204 (alto x ancho x fondo), protección FSD IP20 sin unidad de control y BOP

The SINAMICS G120P Power Module PM230 is a high-performance solution that combines Class A filter protection and IP55 / UL Type 12 ratings. This module is designed to handle 3AC380-480V applications with a low overload capacity of 90KW, ensuring reliable operation even under demanding conditions. The PM230 features an ambient temperature range of 0 to +40°C (LO) and dimensions of 915 x 410 x 416 mm (HXBXT). It is available without a control unit and panel, making it suitable for use with the CU230P-2 firmware version V4.3.2.

SINAMICS G120P POWER MODULE PM230 WITH BUILT IN CL. A FILTER PROTECTION IP55 / UL TYPE12 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 1.1KW FOR 150% 3S.110% 57S.100% 240S AMBIE. TEMP -10 TO+40 DEG C(LO) 460 X 154 X 249 (HXBXT). FSA WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU230P-2 FIRMWARE-VERSION V4.3.2

The PM230 Power Module operates within a mains voltage range of 380 V and features three-phase input and output configurations. This device delivers a maximum output frequency of 550 Hz and is classified under the U converter type. With a nominal output current of 32 A, it supports low overload conditions, providing 15 kW for quadratic loads. The module is designed for unfiltered operation, ensuring reliability in various industrial settings.Measuring 355 mm in height, 140 mm in width, and 165 mm in depth, the PM230 is equipped with an IP20 degree of protection. It is rated for ambient temperatures from 0 to +40 degrees Celsius. Notably, this power module does not integrate a breaking resistance and cannot operate in four-quadrant mode. The module is approved for use with firmware version v4.4 or higher for CU240B/E-2 and CU230P-2 control units.

The power distribution module is integral to the Modicon TM5 series, which is recognized for its modular I/O system functionality. This module delivers a supply voltage of 24V DC with a current rating of 10A, facilitating power to safety I/O segments. It is equipped with multiple indicators including 2 LEDs for power supply, 2 LEDs for safety status, and 20 LEDs for input status signaling.With a compact dimension of 75mm depth, 25mm width, and 99mm height, and a weight of 0.061kg, this module is designed for easy installation on a 35mm DIN rail. It conforms to critical standards including IEC 61131-2, UL 508, and CSA C22.2 No 213, ensuring compliance and safety for diverse industrial applications such as production, packaging machinery, and material handling systems.Moreover, it supports compatibility with the Modicon TM5CSLC safety logic controller and integrates seamlessly with Modicon and PacDrive 3 controllers, enabling scalable configurations for complex machinery. The product is certified by GOST-R, C-Tick, cULus, and CSA, affirming its reliability and safety in industrial environments.

The Phaseo ABL1 regulated switch mode power supply is designed for delivering direct current voltage necessary for various automation applications. With a rated input voltage range of 100V to 240V AC and a maximum output current of 10A at 24V DC, this power supply is capable of supplying up to 240W of power. It is suitable for use in industrial, commercial, and residential settings, including systems such as conveyors, packaging machinery, and food processing equipment. This unit features automatic reset functionality, allowing it to clear short-term faults and restart systems without requiring maintenance intervention. An integrated LED diagnostics indicator facilitates quick troubleshooting. With dimensions of 200mm in width, 98mm in height, and 65mm in depth, it weighs approximately 0.880kg. It is certified under several standards, including CSA 22-2 No 60950-1 and UL 508, ensuring compliance with rigorous safety and performance requirements. The power supply can be mounted using a reversible bracket or a mounting plate, providing flexibility in installation. Designed to operate in any orientation, it boasts a vibration resistance of 2 gn, making it ideal for dynamic environments. The operating temperature range is between 0°C to 45°C without derating, and it can accommodate ambient conditions up to 90% relative humidity.

The 1PH Isolation Transformer features a primary voltage specification of 400-230V +/-15V and delivers a dual secondary output of 2X115V. Its rated performance is 0.63 kVA, making it suitable for various control circuit applications. In compliance with standards EN 61558-2-1, -2-2, and -2-4, this transformer has a protection type of IP00, indicating no specific protection against moisture or dust. It operates effectively within a frequency range of 50 to 60 Hz. The transformer is characterized by a relative short-circuit voltage of 3.7 percent. Furthermore, its terminals utilize a screw/tab connection for installation, ensuring secure connectivity. This transformer is designed specifically for single-phase applications, aligning with the requirements of circuit installations. The dimensions of this unit are 110 mm in depth, 152 mm in width, and 144 mm in height, facilitating integration into control systems.

The PM240-2 Power Module is engineered for the SINAMICS G120 series, supporting a voltage range of 3AC380-480V with a tolerance of +10/-20% at 47-63 Hz. It incorporates a built-in Class A filter and braking chopper, providing reliable performance in various operational conditions.This power module is capable of handling high overload outputs of 45 kW for 200% for 3 seconds, 150% for 57 seconds, and 100% for 240 seconds at an ambient temperature of -20 to +50 degrees Celsius. For lower overload outputs, it supports 55 kW at 150% for 3 seconds, 110% for 57 seconds, and 100% for 240 seconds, with an ambient temperature range of -20 to +40 degrees Celsius.With dimensions of 615 mm in height, 354 mm in width, and 237 mm in depth, it offers an IP20 protection rating. This module is approved for CU firmware version V4.7 SP6 and is suitable for industrial applications, although not permitted for domestic or commercial use. The maximum output frequency is 550 Hz, with a nominal output current of 110 A.

The SEL1200 Selectivity Module features an 8-channel switching characteristic with an input voltage of 24 V DC and a maximum output capacity of 8 x 10 A. This module provides adjustable current response values between 2 A and 10 A, allowing for tailored operational parameters according to specific requirements.Designed for controlled DC voltage applications, the SEL1200 can handle an input current of up to 60 A. It operates within a temperature range of -40 to +70 °C, ensuring reliability even in extreme conditions. The device incorporates a monitoring interface for enhanced operational oversight and safety.With its dimensions of 45 mm in width, 135 mm in height, and 125 mm in depth, this module is compact and suitable for DIN rail mounting. It features a high efficiency rate of 98% and a power loss of approximately 18 W under rated output conditions. Notably, it provides a significant response delay of up to 5 seconds, which can be essential for certain applications.The SEL1200 is compliant with various safety and environmental standards including EN 62368-1 and offers CE marking, UL certification, and UKCA marking. It is also designed with a three-color LED display for operational status, enhancing user interaction and maintenance.For detailed specifications, refer to the technical product detail page. The Designation Code for this module is SITOP SEL1200.

This commutating choke is engineered for three-phase converters, operating at a rated voltage of 400 V and a maximum current of 1 A at 400 Hz. With a nominal inductance of 0.056 mH and a maximum operating current of 360 A, it is suitable for use as a commuting reactor. The design adheres to EN 61558-2-20 standards and features a protection type of IP00, ensuring basic protection without special enclosures. The choke exhibits a relative short-circuit voltage of 4% and is capable of functioning effectively within a temperature range of up to 40°C. Constructed with flat-type terminals, this component is recognized for its application in interference suppression. It meets the demands of industrial environments, providing reliable performance in converter applications.

The Murrelektronik Evolution Power Supply 3-Phase is designed to provide a stable and adjustable DC output voltage ranging from 22 to 28 V with a maximum current of 20 A. This power supply is suitable for demanding industrial environments, offering high efficiency of up to 90% at 400 V AC and robust protection features including overload and short-circuit protection. The unit supports parallel and series connections, allowing for flexible integration into various systems.Electrical Data: The power supply operates with a 3-phase input voltage between 360 and 520 V AC or 480 to 745 V DC, ensuring compatibility with a wide range of industrial power sources. It features a SELV security level and a power frequency of 50 to 60 Hz. The device can handle an inrush current of up to 19 A and includes external backup fuse protection per phase.Mechanical Data: Compact and easy to install, the power supply measures 132 mm in height, 113 mm in width, and 136 mm in depth. It is designed for mounting on TH35 rails according to EN 60715 standards.Environmental Characteristics: The unit is built to withstand harsh conditions, with an operating temperature range from -25 °C to 70 °C and a storage temperature range from -40 °C to 85 °C. It complies with EN IEC 61010-2-201 and EN 61204-3 standards, ensuring reliable performance in various environments.Applications include automation systems, industrial machinery, and any scenario requiring a dependable and adjustable DC power source.