Fuentes de alimentación

The Multi9 C60BP is a low voltage miniature circuit breaker (MCB) featuring three protected poles and a rated current of 3A. It operates under a D tripping curve and supports a rated short circuit breaking capacity of up to 10kA at 415VAC, adhering to the EN/IEC 60947-2 standard. Engineered for both industrial and residential applications, this MCB complies with EN/IEC 60898-1 standards, offering protection against short circuits, overloads, and earth leakage. The device's electrical endurance is rated for 10,000 cycles, while its mechanical endurance reaches 20,000 cycles, ensuring reliable operation. The operational voltage is specified at 240VAC, with a rated insulation voltage of 500VAC and a rated impulse withstand voltage of 6kV. This circuit breaker is suitable for original equipment manufacturers (OEM) and control panel builders. The Multi9 C60BP can be easily mounted on a DIN rail, occupying a width of 6 pitches (54mm). Its IP20 degree of protection, as per IEC/EN 60529, safeguards the terminals, while the operational temperature range spans from -30°C to 70°C and storage temperatures from -40°C to 80°C.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

This ABL8 regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 500V AC, a rated output current of 5A at 24V DC and a rated power output of 120W. Most of these power supplies have auto protection reset. A few have auto / manual protection reset. Some of these power supplies can be mounted directly to a panel. It is also equipped with a PFC (Power Factor Correction) filter. It has LED diagnostics indicator available in the front for troubleshooting instantly. Automatic reset allows short-term faults to be cleared and systems to restart without the need to disturb on-duty maintenance engineers. It installs on DIN rail and is 56mm-wide. It weighs 0,700kg. It is a power supply for industrial use, rail mounting. It conforms to UL 508, CSA C22.2 No 60950-1 standards. The GB2CD07, GB2CD08, GV2RT06 and GV2ME06 thermal magnetic circuit breakers are recommanded for its protection. It has LED diagnostics indicator available in the front for troubleshooting instantly. It installs on DIN rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.

The Altivar 212 variable speed drive is an advanced solution designed for fluid management applications in tertiary sector buildings. It can handle 3-phase asynchronous motors and comes with a protection index of IP21, ensuring reliable operation in various environments. With a rated power of up to 11kW / 15hp and a voltage range from 380V to 480V AC, this drive is designed for efficiency and performance. Its eco-energy design reduces energy consumption by up to 70% compared to conventional control systems. The Altivar 212 drive features cable temperature rise reduction technology, eliminating the need for additional options like line or DC chokes. It weighs 6.45kg and has dimensions of 180mm wide, 232mm high, and 170mm deep. This drive is CE, UL, CSA, C-Tick, and NOM certified, conforming to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 for immunity and conducted and radiated EMC emissions. It offers optional motor chokes for increased cable lengths and reduced disturbance at the motor terminals. The Altivar 212 drive is designed to be mounted in a vertical position (+/- 10 °) on a panel, with 4 fixing holes. It can easily be adapted to all building management systems due to its numerous functions and communication protocols integrated as standard, including Modbus, METASYS N2, APOGEE FLN P1, and BACnet.

The GV2 manual starter and protector provides manual isolation, manual motor control, and thermal overcurrent protection in one compact unit. The basic motor starter GV2ME controls motors with full load currents up to 32 A. The manual starter is three pole with horsepower ratings. The manual starter is operated by push buttons. The Class 10 ambient compensated thermal over current is adjustable from 24 ampere to 32 ampere. This device has screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).

El arrancador suave Siemens SIRIUS S2 está diseñado para proporcionar un control de motor eficiente y confiable para aplicaciones industriales. Este arrancador suave avanzado garantiza un arranque suave y reduce el estrés mecánico en los motores, extendiendo su vida útil y minimizando los costos de mantenimiento. Con una corriente operativa nominal de 45 A y soporte para motores de hasta 22 kW a 400 V, es ideal para una amplia gama de aplicaciones.El arrancador suave SIRIUS S2 cuenta con un sistema de contacto de derivación integrado y tiristores para un rendimiento confiable. Ofrece protección intrínseca del dispositivo, protección contra sobrecarga del motor y limitación de corriente ajustable. La unidad admite voltajes de suministro de control de CA y CC, lo que la hace versátil para varios sistemas de control.El cumplimiento de IEC 60947-4-2 y otras normas relevantes garantiza una alta seguridad y rendimiento. El arrancador suave está equipado con terminales de tornillo para conexiones seguras y admite métodos de montaje con tornillo y a presión para una fácil instalación. Además, incluye una función de reinicio externo y una pantalla roja de señal de falla para una rápida resolución de problemas.Aplicaciones: El arrancador suave Siemens SIRIUS S2 es adecuado para su uso en entornos industriales donde el control y la protección confiables del motor son esenciales. Es ideal para aplicaciones como bombas, ventiladores, compresores y transportadores.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

El motor de arranque manual y protector GV2 proporcionan aislamiento manual, control manual del motor y protección contra sobrecorriente térmica en una unidad compacta. El motor básico de arranque GV2ME controla motores con corrientes de carga completa de hasta 32 A. El arranque manual es de tres polos con potencia. El arranque manual se acciona mediante botones. La sobrecorriente térmica compensada ambiental Clase 10 es ajustable de 0,63 amperios a 1 amperio. Este dispositivo tiene terminales de abrazadera de tornillo. Certificado por múltiples estándares (IEC, UL, CSA, CCC, EAC, Marine, ATEX), cumplimiento con Green Premium (RoHS/REACh).

The Variable Speed Drive ATV950U30N4 is designed for industrial applications, capable of supporting both synchronous and asynchronous motors while delivering high performance. It accommodates motors rated up to 3 kW for normal duty operations and 2.2 kW for heavy duty, enabling applications requiring slight to significant overloads of 120% and 150%, respectively. Operating within a supply voltage range of 380Vac to 480Vac, this drive is suitable for various market segments including oil and gas, mining, and food and beverage industries. The ATV950U30N4 integrates seamlessly into automation architectures thanks to its advanced connectivity options, such as EtherNet/IP and Modbus TCP. This feature facilitates total control over coupling in master/slave configurations. To ensure consistent operation even during connection disruptions, network services are incorporated, and web server functionalities combined with data logging capabilities assist in quick troubleshooting and preventive maintenance. The device also includes an integrated EMC filter and is designed for wall mounting, contributing to its versatility in diverse industrial environments. With an IP55 protection rating, the ATV950U30N4 is engineered to withstand harsh conditions, featuring thermal and short-circuit protection, amongst other safeguards. Its robust construction allows for operation within ambient temperatures of -15°C to 50°C and at altitudes up to 4800 meters with necessary current derating.

Harmony 22 mm modular push buttons, selector switches, pilot lights are designed for industry. This range combines simplicity of setup, flexibility and a robust construction. An ingenious locking system consisting of a snap fit head and body that can be tightened with a single screw but still ensuring an easy and yet secure mounting. Harmony XB4/ZB4 are 22 mm chromium plated metal modular push buttons, selector switches and pilot lights connecting to fully metal mounting collar. The operators can be purchased as complete operators or various modules that can be assembled to meet the user’s specific requirement. Harmony XB5/ZB5 are 22 mm plastic modular push buttons, selector switches, pilot lights. The operator can have a round and square plastic bezel. Simple modular design facilitates post installation servicing, modification and adaption of machines by non-specialists. The contacts can be used for low load electrical contact and high power applications. Shake proof connection screws make periodic retightening unnecessary. A complete set of accessories to provide a solution for applications where exposure to high pressure cleaning, dust and extreme temperatures is an everyday occurrence. These harmony 22mm push buttons are used by machine manufacturers (automotive, textiles, timber) and control system panel builders. Certified and approved for meeting requirements throughout all continents: EN/IEC, UL, NEMA, CSA, CCC, Gost, JIS and many more. They have UL and CE markings and have ratings up to IP66 and IP69K.

The Variable Speed Drive (VSD) from the Altivar Process ATV900 range is engineered to operate with 3-phase motors, including both synchronous and asynchronous types. With a power capacity reaching up to 75 kW for applications that allow for slight overloads (up to 120%) and 55 kW for significant overloads (up to 150%), it is suitable for a variety of industrial processes.Operating within a supply voltage range of 380 to 480 Vac, this drive maintains optimal performance across different motor types. Its advanced features include EtherNet/IP and Modbus TCP connectivity, facilitating seamless integration into various automation systems. The device is designed for applications in sectors such as oil and gas, mining, and food processing.Operation continuity is supported through network services, ensuring functionality even during connection failures. Enhanced diagnostic capabilities, including a web server for data logging, contribute to minimizing downtime through swift troubleshooting and preventive maintenance. With a protective rating of IP21, the drive is suitable for cabinet mounting under industrial conditions.

ABB's F200 series of RCCBs is a comprehensive solution that ensures safety by protecting against fault currents to earth. This range includes a wide variety of configurations, catering to standard applications as well as special ones. The series is known for its instantaneous and selective AC and A types, making it a versatile choice for diverse installations.

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 6.8kg and its dimensions are 180mm wide, 330mm high, 192mm deep. Altivar Machine ATV320 meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in two packages. It is designed to be mounted in vertical position on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The SIMATIC ET 200SP Digital Output Module is a versatile component designed to provide digital output capabilities. This module is equipped with a DQ 4x24VDC/2A standard rating, making it suitable for various applications that require precise and reliable digital output.This module is compatible with BU type A0 and features a color code of CC02. The module also includes diagnostic capabilities, allowing users to easily monitor its performance and ensure optimal operation.

Isolation Transformer: The product is a circuit transformer designed for control installations. It adheres to the standards of EN 61558-2-1, -2-2, and -2-4. This transformer is UL/CSA-recognized and serves as a control circuit transformer.Isolation Transformer: It also functions as an isolation transformer, providing IP00 protection. The terminal connections are screw and tab type with a TA/ISOKL of 40 /B. It operates at frequencies between 50 to 60 Hz.Isolation Transformer: This transformer is designed for a use voltage of 2X115V and an upper voltage limit of 550-525-500-480-460-440-415-400-380-230-208V. It has a phase count of 1 and a power rating of 1 to 5 KVA.

The Altivar Process ATV600 variable speed drive is an innovative solution that provides efficient power to 3-phase synchronous and asynchronous motors. It features multiple communication ports, including RJ45 and Ethernet, making it highly adaptable for various applications.This drive operates at a rated supply voltage from 380V to 480V AC, ensuring compatibility with a wide range of power sources. With its 'Stop and Go' operation, the ATV600 offers up to 30% energy savings when on standby, enhancing overall efficiency.Suitable for motors with power ratings up to 5.5kW / 7.5hp, this drive is ideal for applications requiring slight overload (up to 120%) or significant overload (up to 150%). It weighs 4.7kg and has dimensions of 144mm wide, 350mm high, and 203mm deep.The Altivar Process ATV600 is designed for fluids management processing and energy saving, making it a versatile choice for water and wastewater, mining, minerals and metals, oil and gas, and food and beverage applications. It can be mounted in a vertical position (+/- 10 °) on a wall.This drive supports the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by offering energy management, asset management, and overall performance optimization for the process.

SDP™ Low Power DIN Rail Series Power Supplies provide efficient power from 5 to 48 Vdc and up to 100 Watts in a choice of compact, lightweight DIN rail mounted units. These affordable power supplies offer the exceptional reliability and advanced features required for industrial use. PowerBoost™ overload circuitry starts up industrial loads that can cause ordinary power supplies to foldback or shutdown.

The TeSys D Contactors are engineered to provide perfect compatibility with control systems. These contactors can be utilized to create motor starters for diverse applications.These contactors come in 13 different contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. The 9A inductive 3 pole IEC Contactor can be mounted on DIN rail or directly onto a panel.The contactors are equipped with both Horsepower and Kw motor rating for international acceptance. They are rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. For single phase applications, they are rated for 7.5HP at 115VAC and 15HP at 240VAC.When used with a 480VAC up to 35A circuit breaker, the contactor can handle a SCCR of up to 85kA. When paired with up to a 600VAC 25A Class J or CC fuse, it can handle a SCCR of up to 100kA.The contactor comes with a 24 VDC coil and a transient suppressor module. It has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections.The contactor measures 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth. It weighs 0.71 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the requirements of RoHS/REACh, making it a Green Premium product.

This Lexium 32 servo drive works at a rated supply voltage from 208Vac to 480Vac. It can feed 3-phase synchronous motors BMH or BSH, its continuous output current is 6A at 8kHz. The compact size of the servo drive and associated servo motor provides maximum power in the minimum space. This servo drive is specifically designed for industrial machines. It offers high performance, power and simplicity of use in motion control applications. It complies with international standards IEC/EN 61800-5-1, IEC/EN 61800-3, and is UL and CSA certified and CE marked. It has been developed to meet the requirements of directives regarding protection of the environment (RoHS).

This Schneider Electric Harmony XB4 series emergency stop / shutdown push button incorporates a 40mm red mushroom head and utilizes a latched key release (key no. 455) actuation method. The unit features a robust metal bezel construction designed for integration into standard 22mm diameter panel cutouts. Electrical connections are facilitated through simple screw-clamp terminals. The prominent 40mm mushroom shape, combined with the distinctive red color, ensures high visual recognition from a distance. Designed to withstand demanding conditions, this emergency stop / shutdown button—often designated as EMS (Emergency Machine Stop) or EMO (Emergency Off)—offers resistance against impact, dust, water and vibration, achieving an IP66 ingress protection rating. This makes it well-suited for deployment in challenging industrial environments.