Herramientas y accesorios

This Schneider Electric Altivar Profibus DP communication module has 1 x 9-way female SUB-D connector. It complies with PROFIBUS DP V1 standard. This communication module enables integration of your drive in your Profibus process control network. It is simple to install and remove from Altivar drives thanks to its modular withdrawable design. It is compatible with Altivar Process ATV600 (ATV630, ATV650)Altivar Process ATV900 (ATV930, ATV950), Lexium 32, Altivar Easy 610, Altivar 32, Altivar Machine ATV340 and Altivar Machine ATV320. Removable module allows last minute decisions on drive communication protocol, facilitates installation project management. It weighs 140g.

The Encoder Interface Card for Altivar is a versatile solution that supports both Flux Vector Control operation with sensor for asynchronous motors and Vector Control operation with speed feedback for synchronous motors. This card is designed to improve drive performance, regardless of the motor load state. It is compatible with push-pull outputs encoder technology and is simple to install and remove. It is inserted into a dedicated slot of the variable speed drive and is protected against encoder supply short circuits and overloads.This card is specifically designed for Altivar 61 and Altivar 71, making it a reliable choice for various industrial applications. Its robust design ensures durability and long-term performance. The card's compatibility with push-pull outputs encoder technology makes it an ideal solution for systems that require precise control over motor speed and direction.

This EtherNet/IP, Modbus TCP, and MD-Link dual port module communication module is an option for variable speed drives of Altivar range. It is equipped with 2 RJ45 connectors. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weighs 20g.

This EMC input filter enables your drive to be in compliance with electromagnetic compatibility requirements. It is designed to reduce conducted emissions on the supply mains and enlarge the maximum motor cable length. This product is compliant with IEC/EN 61800-3, category C1, C2 or C3, in Environment 1 (public network). It is compatible with Altivar 32, Altivar machine ATV320 and ATV340, Lexium 28 and Lexium 52. It is mounted beside the variable speed drive. It acts as a support for the drives and is attached to them via tapped holes.

This EMC input filter is an option for variable speed drives of Altivar 12 range. This EMC filter enables your drive to be in compliance with electromagnetic compatibility requirements. Its dimensions are 75mm wide, 194mm high, and 30mm deep. It provides extra protection against electromagnetic emissions. The choice of the filter depends on the drive rating. It weighs 1.120kg. It is designed to reduce conducted emissions on the supply mains and enlarge the maximum motor cable length. This product is compliant with IEC/EN 61800-3, category C1, C2 or C3, in Environment 1 (public network). Choosing the proper EMC filter on the drive rating. The product is delivered in one package. The drive is fixed onto the filter with 2 screws. The ATV12 range meets basic machine requirements united with simplicity.

This Schneider Electric Altivar CANopen open style communication module has 1 x 5-way screw connector. It complies with CANopen open style communication protocol. This communication module enables integration of your drive in your CANopen open style process control network. It is simple to install and remove from Altivar drives thanks to its modular withdrawable design. It is compatible with Altivar Machine ATV320, Altivar 32, Altivar Machine ATV340, Altivar Process ATV600 (ATV630, ATV650)Altivar Process ATV900 (ATV930, ATV950) and Lexium 32. Removable module allows last minute decisions on drive communication protocol, facilitates installation project management. This range is compatible with Altivar Process ATV900, Altivar Process ATV600, Lexium 32, Altivar Process Modular, Altivar Machine ATV340 except Sercos drives, Altivar 32 and Altivar Machine ATV320 and Lexium 32 servo drives. Altivar variable speed drives and soft starters deliver top performance in motor control applications across machines, processes and buildings.

This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with RS 422 differential outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.

This Ethernet/IP, ModbusTCP communication module enables integration of your drive in your process control network. It is simple to install and remove from Altivar drives thanks to its modular withdrawable design. It is compatible with Altivar Process ATV600 and Altivar process Modular. It has 2 x RJ45 connector.

This EMC input filter functions as an additional component for variable speed drives in the Altivar series and servo drives within the Lexium series. With a rated current of 47 A, it is engineered to reduce conducted emissions on the line supply, ensuring compliance with the stringent requirements of IEC/EN 61800-3 categories C1 and C2. This capability also facilitates an increased maximum motor cable length for category C3 applications.Weighing 3.15 kg, the filter is rated with an IP20 protection index and is specifically designed for use in TN and TT type systems. The installation can be performed beside or beneath the drive, with the power supply connected directly through the filter output cable.In terms of operational parameters, the filter operates effectively within an ambient temperature range of -10 to 50 °C. Its construction allows it to withstand shock resistance up to 15 g for 11 ms and vibration resistance of 1 g from 13 to 150 Hz. Storage temperatures can range from -25 to 70 °C, and it can function at altitudes up to 3280.84 ft (1000 m) without current derating.

This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 15A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2 or C3. Its protection index is IP20. It weighs 1kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. It can be mounted beside or under the drive. The drive's power supply is then connected directly via the filter output cable.

The Altivar Remote Terminal is designed as a dialogue option for variable speed drives, specifically within the Altivar range. This terminal boasts an IP54 protection index, making it suitable for various industrial environments. Its primary function is to facilitate remote access to the Human-Machine Interface of the Altivar drive, allowing users to control, adjust, and configure the drive remotely. It also provides a display for monitoring the drive's status and error codes.This terminal is lightweight, weighing just 250g, and is designed to operate within a temperature range of up to 50°C. To ensure proper installation, a remote-mounting cordset (VW3A1104Rxx) is required, which should be ordered separately.The Altivar Remote Terminal is part of the ATV12 range, offering a balance between basic machine requirements and simplicity in design. This makes it an ideal choice for various industrial applications where remote control and monitoring are essential.

Altivar 71 Variable Frequency Drives are for constant torque applications from 1 to 700 HP. For the latest in high performance drives for heavy duty applications consider using an Altivar Process ATV900 family drive. Its protection index is IP54. This terminal is used to locate the Human-Machine Interface of the Altivar drive remotely on the door of an enclosure. Its maximum operating temperature is 50 °C. It provides a pixel resolution of 240 x 160 pixels. It weighs 180g. It is used to control, adjust and configure the drive, display the current values (motor, input/output values, etc), save and download configurations, 4 configuration files can be saved. A remote-mounting cordset VW3A1104Rxx is also required, to be ordered separately.

This PROFIBUS DP V0 communication card is an option for variable speed drives of Altivar range. It is equipped with a 9-way female SUB-D connector. It is compatible with Altivar 61 and Altivar 71. It enables integration of your variable speed drive in your process control network. It weighs 300g.

This door mounting kit is an accessory for variable speed drives of Altivar range. This door mounting kit is designed for mounting the graphic terminal on enclosure door with IP 65/UL Type 12 degree of protection as standard. It comprises a tightening tool, cover plate to maintain IP 65 if no terminal connected, mounting plate, RJ45 for graphic display terminal, seal, fixing nut, anti-rotation pin, RJ45 for mounting cordset (10m maxi), grounding connector. A remote-mounting cordset VW3A1104Rxx has to be ordered separately.

This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 25A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2 or C3. Its protection index is IP20. It weighs 1.650kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. It can be mounted beside or under the drive. The drive's power supply is then connected directly via the filter output cable.

El RECEPTÁCULO Siemens PARA 3RK FLAT, YEL & BLK CABLE es una placa de montaje robusta y confiable diseñada para módulos compactos K60. Esta placa de montaje está diseñada específicamente para el montaje en pared y admite dos cables planos: el cable AS-Interface (amarillo) y el cable AS-Interface 24V (negro). Garantiza una conexión segura y eficiente mediante el método de perforación de aislamiento, lo que lo convierte en una opción ideal para aplicaciones de automatización industrial.Con su protección IP67 cuando se monta con tornillos con el módulo compacto K60, esta placa de montaje es adecuada para su uso en entornos hostiles, proporcionando una excelente resistencia a la entrada de polvo y agua. El producto cumple con la directiva RAEE (2012/19/UE) y cumple con las restricciones de sustancias según la directiva RoHS desde el 01.07.2006.Diseñada para facilitar la instalación y la durabilidad a largo plazo, la placa de montaje K60 de Siemens es un accesorio esencial para los módulos de E/S digitales que operan en el campo. Forma parte de la familia de productos de accesorios diversos y está clasificado según varios estándares internacionales, lo que garantiza la compatibilidad y confiabilidad en diversos entornos industriales.

Radioline - 2.4 GHz wireless transceiver with RS-232/RS-485 interface, can be extended with I/O modules, RSMA (female) antenna connection, point-to-point, star, and mesh networks up to 250 stations, range of up to 5 km (with a clear line of sight), for worldwide use

This rear panel is compatible with Harmony STU human machine interfaces (HMIs). It is made of PC/PBT and available in dark gray. Its dimensions are 118mm (width) x 40.1mm (depth). It is suitable for simple machines and infrastructure applications. This panel is compatible with HMISTU655, HMISTU655W, HMISTU855 and HMISTU855W. Harmony STO (fromerly known as Magelis STO) is powered by the EcoStruxure operator terminal expert and STU (fromerly known as Magelis STU) is powered by Vijeo Designer.

The SMC VVQ2000-10A-1 Blanking Plate Assembly is designed for use with VQ valves, which are renowned for their high-speed performance, frequent operation, stable response times, and long service life. This blanking plate is specifically engineered to facilitate the seamless integration and maintenance of VQ(C)2000 series valves.One of the standout features of this assembly is its innovative mounting method, which allows valves to be replaced without the need to disassemble the entire manifold. This significantly reduces downtime and maintenance labor, making it an efficient choice for industrial applications.Additionally, the built-in one-touch fittings streamline the piping process, saving both time and labor. The assembly is constructed with high-quality metal seals, ensuring durability and reliable performance in various environmental conditions.Applications: The SMC VVQ2000-10A-1 Blanking Plate Assembly is ideal for use in automated systems where high-speed and frequent valve operations are required. It is suitable for industries such as manufacturing, automotive, and process control.

The IE M12 PLUG PRO is designed for reliable connectivity, offering a robust M12 plug connector with a rugged metal enclosure. Its insulation-displacement technology facilitates quick assembly, enabling efficient installation processes. The connector features a 180° cable outlet (D-coded), allowing for flexible wiring configurations. This product is suitable for use with SCALANCE X208 PRO and ET 200 PRO PN systems. It operates effectively in challenging environments, with an ambient temperature range of -40 °C and a high degree of protection rated at IP67 when mounted, ensuring durability against dust and water ingress. Each package consists of 8 units, making it convenient for bulk installations. The swivel locking mechanism further enhances the reliability of connections.