Motores eléctricos

Experience the power of our High Feature Reversing Starter, designed for optimal performance in demanding industrial applications. This starter boasts electronic switching and overload protection up to 0.09 kW / 400 V, ensuring reliable operation under heavy loads. The adjustment range of 0.1 to 0.4 A allows for precise control over your system's power consumption. With PROFIenergy technology, you can trust in our starter's energy efficiency and long-term reliability.Enhance your automation capabilities with the option of a 3DI/LC module. This optional feature provides additional functionality and compatibility for seamless integration into your existing systems.

The PSR9-600-70 softstarter boasts a maximum operational current rating of 9 A, with a voltage range from 208 V to 600 V AC. It is designed for a control voltage between 100 and 240 V AC at 50/60 Hz. The device features a two-phase control soft start and stop through a voltage ramp. It also includes built-in bypass for easy installation and energy savings. A RUN signal is available from a relay output in NO (normally open state).The start/stop ramp and time can be easily set using three potentiometers on the front of the device. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, for which mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values.These softstarters are suitable for small three-phase motors with nominal currents from 3 to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 250A and 230V to 440V, a rated power up to 132kW (400V to 440V in supply line) and up to 220kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

The TeSys U control and diagnostic unit is designed to be integrated into advanced power bases such as LUB120, LUB320, and LUB380, forming a comprehensive starter controller for 1-phase motor applications up to 2.2kW at 400V.This control unit provides robust protection to motors with adjustable rated current from 3A to 12A, overload tripping class 10, short circuit protection at 13 times the maximum current, and overcurrent protection at 14.2 times the rated current. It also includes features such as phase loss detection and insulation fault protection (equipment only).The unit offers a thermal overload alarm that can be used locally with a LUFDA module or remotely with a LULC module, along with a test push button for simulating overload conditions. It requires a 24V DC voltage for the control of the starter through its control terminals A1/A2 located in the power base.Certified for use with LUB power bases (IEC, UL, CSA, CCC, EAC, Marine), this product is also Green Premium compliant (RoHS/REACh).

The SIRIUS motor starter M200D AS-i is designed as a basic electronic reversing starter, featuring AS-Interface communication for seamless integration into your system. Key Features: Suitable for switching AC-3 at 0.75KW / 400V with a current range of 0.15A to 2.00A Electronic overload protection using Thermistor: THERMOCLICK / PTC with brake contact DC voltage of 180V for reliable operation Compatible with Han Q4/2 - Han Q8/0 connectors for easy installation and maintenance

The softstarter PSR60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 0.09kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys island direct SIL starter, 3 poles, 38A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 38A and motors up to 18,5kW@400V / 20hp@480V. In association with a TPRSM001 module and an external safety device, it can be used for safety related systems conforming to IEC 61508. It provides motor protection functions including thermal overload (setting 0.76-38A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The PSTX300-600-70 Softstarter is designed to provide smooth and reliable motor starting for medium to large-sized three-phase motors. With a rated maximum operational current of 300 A and an operating voltage range of 208 to 600 V AC, this softstarter ensures efficient and controlled motor operation.The PSTX300-600-70 features a three-phase control soft start and stop through a voltage or torque ramp, making it ideal for applications requiring precise motor control. It includes a built-in bypass for easy installation and energy saving, as well as a detachable full graphic display with IP66 and 4x outdoor rating for user-friendly interaction.Key Features:Rated operational current: 300 AOperating voltage: 208...600 V ACControl voltage: 100...250 V AC at 50/60 HzThree-phase control soft start and stopBuilt-in bypass for energy savingDetachable full graphic display with IP66 and 4x outdoor ratingCurrent limit, kickstart, analog output, EOL, motor heating, and pump cleaning functionsJog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump modeFieldbus communication options including Modbus RTU, Profinet, Profibus, Modbus TCP, Ethernet IP, and othersApplications:The PSTX300-600-70 is suitable for a wide range of applications, including:PumpsFansCompressorsConveyors

TeSys U standard control unit to be inserted in power bases LUB12, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 0.25kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 0.09kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V AC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The Schneider Electric Altistart 48 is a sophisticated soft starter controller that utilizes six thyristors to facilitate torque-controlled soft starting and stopping of three-phase asynchronous motors. This device provides a range of functionalities including soft start, deceleration, machine protection, motor protection, and communication with control systems.Operating at a rated supply voltage ranging from 208V to 690V AC with an 88A rating, the Altistart 48 ensures smooth transitions and reduced mechanical stress. Its torque control system enables single acceleration ramps for easy adjustments regardless of the load.Suitable for motors with power ratings up to 75hp (at 575V) / 75kW (at 690V) for standard applications and 60hp (at 575V) / 55kW (at 690V) for severe applications, the Altistart 48 is designed to cater to a wide range of industrial needs. It boasts a compact design with dimensions of 190mm width, 290mm height, and 235mm depth, weighing 8.3kg.The Altistart 48 is ideal for centrifugal machines, pumps, fans, compressors, and conveyors, commonly found in construction, food and beverage, and chemical industries. It adheres to the IEC/EN 60947-4-2 standard and is certified with CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF.Connecting directly to the Modbus bus via its RJ45 connector port, the Altistart 48 can also be linked to Ethernet, Fipio, Profibus DP, and DeviceNet networks through a separate module. It is designed for vertical mounting on a panel with four fixing holes.With its Torque Control System (TCS) for controlled starting and deceleration, the Altistart 48 offers seamless integration into enclosures and control systems. This range provides continuous improvement in machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise.

The RSGD4037E0VX20 from Carlo Gavazzi is a highly advanced industrial automation product that is designed to meet the demands of modern industrial processes. This component is a solid-state relay that is capable of controlling various types of loads such as resistive and inductive loads, making it a versatile solution for a wide range of applications. It is equipped with a high switching capacity of 37A and a voltage rating of 20-280VAC, making it suitable for use in high-power applications. The RSGD4037E0VX20 also features a built-in overvoltage protection system that ensures reliable and safe operation in harsh industrial environments. With its compact size, the RSGD4037E0VX20 can be easily integrated into existing systems, making it an ideal choice for upgrading and improving industrial automation processes.

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 110A, a rated power from 30HP to 100HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL3 /PL e, and screw connection.

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB320, LUB380, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 7.5kW@400V. It provides full protection to motors with a rated current Ir 4.5-18A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB320, LUB380, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 15kW@400V. It provides full protection to motors with a rated current Ir 8-32A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The TeSys U control and diagnostic unit is designed to be inserted in advanced power bases such as LUB320, LUB380, or LUB380 to form a TeSys U starter controller for 3-phase motor applications up to 15kW@400V. It offers full protection to motors with a rated current of 8-32A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, and overcurrent at 14.2 x Ir. It also includes features such as phase loss, insulation fault (protection of equipment only), a thermal overload alarm, and a test push button for overload simulation.This unit is compatible with a 110-240V AC / 110-220V DC voltage for the control of the starter through the control terminals A1/A2 located in the power base. It is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and Green Premium compliant (RoHS/REACh).

This product is part of the PacDrive 3 range, an offer of integrated servo motors for machines from 0.31kW to 1.91kW. The 8-pole integrated servo motor features 3 stacks with a maximum mechanical speed of 3000RPM, a continuous rated stall torque of 5.8Nm, and a parallel keyed shaft. It is equipped with a single-turn SinCos Hiperface® absolute encoder (128 periods per revolution) without a holding brake. It is an integrated servo motor with a supply voltage of 250V to 700V, a continuous stall current of 3.6A, and a maximum continuous power of 1.1kW. The shaft dimensions are 19mm (diameter) x 40mm (length). It is an IP54 rated product. The length of this product is 285mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 8.1kg. It is suitable for use in general machine control, packaging machine automation, and material handling applications. It supports international standard 100mm flange mount with a natural convection cooling system. Lexium 62 ILM integrated servo modules can be controlled with all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. Multiaxis integrated servo drives from 0.31kW to 1.91kW for automation solutions based on PacDrive 3.

This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 9000RPM and parallel key shaft end without holding brake. It is an equipped with an absolute multi-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. It is a servo motor with a rated supply voltage of 115V to 480V, a continuous stall current of 0.73A and a continuous power of 290W. The shaft dimensions are 9mm (diameter) x 20mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP65 rated product. The length of this product is 132.5mm and the centering collar dimensions are 2mm (depth) x 40mm (diameter) with 63mm mounting hole. It weighs 1.2kg. This range is compatible with PacDrive 3 for motion centric machines. It supports 55mm international standard flange mount with a natural convection cooling system. Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.