Motores y servomotores

Arrancador de motor SIRIUS M200D Comunicación AS-i: Arrancador DOL estándar de AS-Interface Conmutación electrónica AC-3, 0.75KW / 400 V 0.15 A...2.00 A Protección electrónica contra sobrecarga Termistor: THERMOCLICK / PTC con contacto de freno 180 V DC 4 DI / 1 DO AS-i Han Q4/2 - Han Q8/0 con operación manual en sitio e interruptor de llave

SIRIUS MOTOR STARTER M200D TECHNOLOGIEMODUL DIRECT ON-LINE STARTER MECHANICAL SWITCHING 3 400V AC/0,9KW; 0,15A...2,00A; ELECTRONIC OVERLOAD PROTECTION; THERMISTOR: THERMOCLICK / PTC WITHOUT BRAKE CONTACT 4DI / 2DO HAN Q4/2 - HAN Q8/0 USING A COMMUNICATION MODULE 3RK1305* USABLE WITH PROFIBUS OR PROFINET

SIRIUS motor starter M200D Technology module DOL starter Mechanical switching AC-3, 5.5 kW / 400 V 1.5 A...12.00 A, Electronic overload protection Thermistor:, THERMOCLICK / PTC with brake contact, 400 V AC 4 DI / 2 DO Han Q4/2 - Han Q8/0 with manual, on-site operation and key-operated switch via communication module 3RK1305* can be used on PROFIBUS or PROFINET

The TeSys Ultra reversing power base, model LU2B12BL from Schneider Electric, is designed for efficient control of three-phase motors in applications requiring high performance and reliability. This power base is rated for a current of 12A at a voltage of 690V, making it suitable for a wide range of industrial applications. It features a modular design that allows for the addition of various modules to create a comprehensive reversing starter controller with advanced protection and control functions.The base includes power contacts, a control coil, and a rotary handle, all integrated into a compact unit measuring just 45mm in width. It is designed for DIN-rail mounting and screw fixing, ensuring easy installation and secure operation. The rotary handle can be padlockable for added security.This power base is certified when used with a LUC control unit, complying with various international safety standards including IEC, UL, CSA, CCC, EAC, and Marine. It also meets Green Premium compliance standards such as RoHS/REACh.

The Lexium 32 range by Schneider Electric provides servo motors from 0.15kW to 11kW. This specific model is a 10-pole servo motor that boasts a maximum mechanical speed of 8000 RPM and a smooth shaft end without holding brake. It is equipped with a single-turn SinCos Hiperface® feedback, providing a speed feedback resolution of 32,768 points/turn. The servo motor has a rated supply voltage of 240V, a continuous stall current of 2.85A and a continuous power of 1.05W. The shaft dimensions are 11mm (diameter) x 23mm (length). It comes with rotatable right angled connectors for electrical connection. This product is rated IP54 and has a length of 122mm, with centering collar dimensions of 2.5mm (depth) x 60mm (diameter) and a mounting hole of 82mm. It weighs 1.6kg. The Lexium 32 range is compatible with Lexium 32 servo drives, including LXM32.D18M2 at 115V single phase and LXM32.U90M2 at 230V single phase. It supports a 70mm international standard flange mount with a natural convection cooling system.Key Features:High-performance servo motor from the Lexium 32 rangeMaximum mechanical speed of 8000 RPMSmooth shaft end without holding brakeSingle-turn SinCos Hiperface® feedback with 32,768 points/turn speed feedback resolutionRated supply voltage of 240VContinuous stall current of 2.85A and continuous power of 1.05WRotatable right angled connectors for electrical connectionIP54 ratedLength of 122mmCentering collar dimensions: 2.5mm (depth) x 60mm (diameter)Mounting hole of 82mmWeighs 1.6kgCompatible with Lexium 32 servo drives

The SIRIUS motor starter M200D is equipped with AS-i communication, offering a robust solution for industrial automation. This reversing starter features basic mechanical switching and operates at an AC-3 rating of 0.75KW / 400V, with a current range from 0.15A to 2.00A. It incorporates electronic overload protection and utilizes a thermistor for temperature monitoring, such as THERMOCLICK or PTC without brake contact. The device also supports 2DI AS-i and 2DI / 1DO on the unit, with connectivity options including Han Q4/2 to Han Q8/0.

The ET200SP Direct On-Line Starter is a high-performance, versatile solution designed for a wide range of applications. It offers electronic switching capabilities, ensuring reliable and efficient operation. The starter also features an electronic overload protection mechanism that can handle up to 1.1 kW / 400 V. This allows it to be used in various industrial settings where power requirements vary. The adjustment range of the ET200SP Direct On-Line Starter is from 0.9 to 3A, making it adaptable for different load conditions. It's equipped with a PROFIenergy feature, which enhances its energy efficiency and performance. For added convenience, an optional 3DI/LC module can be integrated.

The SIRIUS 3RM1 is a fail-safe reversing starter designed for high voltage applications, with a rating of 500 V. It offers a power range of 0.55 - 3 kW and can handle currents from 1.6 to 7 A at a voltage of 24 V DC.This starter is equipped with a screw-type connection system, ensuring reliable and secure connections. Its fail-safe design ensures that the motor will stop if an overload or fault condition occurs, providing enhanced safety.

The SIRIUS 3RM1 DOL Starter is a robust solution for high voltage and power applications. It features a fail-safe design, ensuring that the motor remains in a safe state even under fault conditions. The starter supports a voltage of up to 500 V and can handle power levels from 0.55 kW to 3 kW. With a current rating of 1.6 - 7 A and a DC voltage of 24 V, it offers versatile control options.The starter comes with screw/spring-type terminals for easy installation and maintenance. It is designed to meet the highest safety standards, providing peace of mind for users.

This product is part of the PacDrive 3 range, an offer of integrated servo motors for machines from 0.31kW to 1.91kW. The 6-pole integrated servo motor features 1 stack with a maximum mechanical speed of 6000RPM, a continuous rated stall torque 1.1Nm and smooth shaft. It is an equipped with a multi-turn SinCos Hiperface® absolute encoder (128 periods per revolution) with holding brake. It is an integrated servo motor with a supply voltage of 250V to 700V, a continuous stall current of 1.55A and a maximum continuous power of 0.31kW. The shaft dimensions are 11mm (diameter) x 23mm (length). It is an IP54 rated product. The length of this product is 219mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 3kg. It is suitable for use in general machine control, packaging machine automation, material handling applications. It supports international standard 70mm flange mount with a natural convection cooling system. Lexium 62 ILM integrated servo modules can be controlled with all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. Multiaxis integrated servo drives from 0.31kW to 1.91kW for automation solutions based on PacDrive 3.

The softstarter PSE105-600-70 is designed for a rated maximum operational current of 105 A, with an operating voltage range spanning from 208 to 600 V AC. It features a two-phase control system that allows for a soft start and stop through a voltage or torque ramp. The device includes built-in bypass for easy installation and energy savings. It also provides a relay output with RUN, TOR, and Event signals in the NO state. The PSE105-600-70 offers functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. The device is equipped with an illuminated display that uses symbols for language neutrality. As an option, you can add an identical external keypad rated at IP66. Communication with the PSE105-600-70 can be achieved through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can use an external adaptor and a Fieldbus plug. The softstarter is a versatile solution suitable for small to medium-sized three-phase motors with nominal currents from 18 to 370 A. Common applications include pumps, fans, compressors, and conveyors.

TeSys U advanced power base, 3 poles (3NO), 32A/690V, to be completed with a control unit LUC to form a TeSys U starter controller, for 3-phase motor applications up to 15kW@400V. Base composed of power contacts, control coil, rotary handle, with a modular design for additional modules to form a "all in one" starter controller with basic or advanced protection and control functions. It is equipped with auxiliary signaling contacts (1NO+1NC), a control terminal block, and blanking shutters covering the empty cavities. It provides a high breaking capacity Icu 50kA@400V, start-stop control guaranteed for 3600 cycles/hour. Very compact (45mm width), DIN-rail mounting and screw fixing, with a padlockable rotary handle. Certified when used in conjunction with a LUC control unit (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Square D 2510K motor starting switches provide compact manual On Off control of single or three phase motors or resistance heating loads up to 600 VAC, where overload protection is not required or provided separately. Open type fits industry standard single-gang switch boxes for direct mounting in a wall or machine using any standard cover plate with a standard single cutout. Pilot light option is available. A variety of enclosures are available. Units are UL Listed and CSA Certified for global applications. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This NEMA 1 general purpose enclosure is a surface mounting enclosure. The enclosure has has a 0.5 and 0.75 knockout on the top and bottom. The enclosure is 4.25 inches tall, 2.44 inches wide and 2.75 inches deep. It weighs 0.84 lb. This device is UL Listed and CSA certified.

The Schneider Altistart U01 is a high-performance soft start/soft stop unit designed specifically for 3-phase asynchronous motors. It is compatible with TeSys U starter-controllers and can handle motor ratings up to 11kW or 15hp for 200V to 480V AC and up to 22A. This compact soft starter measures just 45mm in width, making it one of the smallest on the market. Its integrated bypass reduces noise and heat dissipation while maintaining a protection index of IP20. It weighs only 0.49kg and has dimensions of 45mm wide, 314mm high, and 170mm deep. The Altistart U01 is suitable for a variety of applications including conveyors, pumps, fans, compressors, automatic doors and gates, small cranes, and belt-driven machinery. It complies with IEC/EN 60947-4-2 standards and carries UL, CSA, C-Tick, and CCC certifications, as well as CE marking. Easy to install on a DIN rail, the Altistart U01 combines simplicity with efficient cabling and fast configuration. Its combination with TeSys Model U provides a unique motor starter solution that reduces machine wear and minimizes maintenance time, optimizing operations.

The MO132-1.0 manual motor starter magnetic only is a compact 45 mm width device with a rated operational current of Ie = 1.00 A. This device is used to manually switch on and off loads/motors and to protect them reliably from short-circuits without the need for a fuse. The manual motor starter offers a rated service short-circuit breaking capacity of Ics = 100 kA at 400 V AC. A combination with overload relays or motor controllers allows the protection of motors. Further features include a built-in disconnect function, trip-free mechanism, and a rotary handle with clear switch position indication. The manual motor starter magnetic only is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Accessories such as auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks are available.

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 3-phase motor applications up to 0.25kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The softstarter PSR85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

SIRIUS motor starter M200D AS-i, Communication: AS-Interface Reversing starter standard Mechanical switching AC-3, 5.5 kW / 400 V 1.5 A...12.00 A, Electronic overload protection Thermistor:, THERMOCLICK / PTC without brake contact 4 DI / 1 DO, AS-i Han Q4/2 - Han Q8/0 with manual, on-site operation and key-operated switch

SIRIUS motor starter M200D AS-i Communication: AS-Interface Reversing starter Basic Electronic switching AC-3, 4 kW / 400 V 1.5 A...9.00 A Electronic overload protection Thermistor: THERMOCLICK / PTC with brake contact 230/400 V AC 2DI AS-i + 2DI / 1DO on device Han Q4/2 - Han Q8/0 with manual on-site operation and key-operated switch

The SIRIUS Soft Starter S2 is a high-performance motor control device designed for industrial applications. It offers a robust 72A current rating with a maximum power output of 37kW at 400V. This model supports a wide range of AC voltage inputs from 200 to 480V, and it operates on both AC and DC power sources at 24V. The SIRIUS Soft Starter S2 features screw terminals for easy motor connection and includes thermistor motor protection to safeguard against overheating. Its compact design and rugged construction make it an ideal choice for industrial environments where reliability and durability are paramount.