Sensores de automatización

The photoelectric sensor XUB features a cylindrical design with a diameter of 18 mm and is constructed from nickel-plated brass, ensuring durability and corrosion resistance. With its operational temperature range of -25°C to +55°C, this sensor is suited for extreme environmental conditions. The device supports multiple sensing modes, including infrared diffuse and polarized reflex, with a maximum sensing distance of 30 m for thru beam applications and 4.5 m for polarized reflex detection.Equipped with a standard M12 connector, it integrates seamlessly with existing sensor cabling. The sensor also includes a three-LED status indicator for easy monitoring of operational status. This product is designed with double insulation to provide enhanced safety against electrical shocks, complying with established safety standards such as CSA and UL. The XUB series sensor has a switching frequency of up to 250 Hz and a maximum delay response time of 2 ms, making it suitable for high-speed applications.

This analogue position sensor is designed with a cylindrical form factor and is housed in nickel-plated brass, offered in both M18 and M30 sizes. It delivers an output current ranging from 0 to 20 mA, ensuring precise measurement capabilities. The sensor can be complemented with a level amplifier relay S 183 and an analogue display to create comprehensive measuring systems.With a rated operational voltage of 17 to 27 VDC and an operational current up to 20 mA, this device is suitable for various applications. The sensor's linearity is maintained within ± 3% of full scale, providing repeat accuracy of ≤ 1%. It is engineered to operate within an ambient temperature range of -15° to +65°C and is protected against harsh conditions with an IP 67 rating, which corresponds to Nema ratings 1, 3, 4, 6, and 13.The construction features a body made of nickel-plated brass, while the front and back are crafted from thermoplastic polyester in blue and black respectively. Its durability is enhanced by a reverse polarity current limiter and a transient voltage withstand of ≤ 2 kV/0.5 J. The sensor's weight, including the 2 m cable made from grey PVC, is 85 g, and it requires a tightening torque of 17.5 Nm for secure installation. Compliance with CE marking confirms its adherence to safety and operational standards.

The inductive standard sensors facilitate effective object detection within metal environments. With a dimension of Ø 12 x 65 mm and an installation style of quasi-flush, these sensors are particularly suited for applications requiring minimal space. They operate in a sensing range of 8 mm and employ a PNP Normally Open (NO) switching output, achieving a switching frequency of 300 Hz.These sensors are constructed from brass with a nickel-plated surface protection, ensuring durability and resistance to contaminants. The sensing surface is made from LCP, enhancing reliability in challenging conditions. Connectivity is provided through a 4-pin M12x1 Male connector. The operational voltage ranges from 10 to 55 VDC, allowing for versatile integration into various systems.With an ambient temperature rating of 0-60 °C and an IP67 ingress protection class, these sensors are designed for robust performance. The broad availability of over 500 preferred types globally ensures prompt delivery and adaptability to different applications. The product is compliant with CE, EAC, and WEEE standards.

The Pressure-rated inductive sensors BES02WH are designed for applications requiring high-pressure resistance. Featuring a cylindrical shape with dimensions Ø 12 x 60 mm, these sensors are built to withstand pressures up to 80 bar. The robust stainless steel housing and sensing surface ensure durability and longevity in demanding environments.With a quasi-flush installation and a switching distance of 6 mm, the BES02WH sensor offers reliable performance and precision. The PNP normally open (NO) switching output provides efficient signal transmission, while the sensor's IP67 protection guarantees resistance to dust and water ingress.Engineered to comply with IEC 60947-5-2 standards, the BES02WH sensor includes essential features such as short-circuit protection, polarity reversal protection, and protection against device mix-ups. The sensor operates within a voltage range of 10...30 VDC and can handle a rated operating current of 200 mA.Ideal for use in industrial automation, the BES02WH sensor is suitable for applications involving high-pressure environments, ensuring reliable and accurate detection.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

The SIMATIC MV420 SR-P is a performance-oriented compact code reader designed to handle both 1D and 2D codes with exceptional efficiency. This model boasts an IP67 rating, ensuring it can operate in challenging environments. It comes equipped with multicode, autotrigger, and ID-Genius features, enhancing its functionality and versatility. The MV420 SR-P is renowned for its very high reading speeds, making it a reliable choice for demanding applications.

The Siemens SLG 75 MOBY E Antenna is a high-quality RF antenna designed for use with the SLG 75 100mm system. This antenna features a PVC jacket and offers an IP65 rating, making it suitable for a wide range of environments. It is also temperature-resistant, capable of operating in temperatures ranging from -25 to +70 degrees Celsius. The antenna measures 75x75x20 mm and has a cable length of 3 meters. This makes it easy to install and position as needed for optimal performance.

The SIMATIC RF600 Reader RF650R FCC is a robust UHF reader designed for industrial automation applications. It operates within the frequency band of 902-928 MHz, ensuring reliable communication. The device features multiple interfaces including Ethernet RJ45, four antennas, and four digital inputs/outputs, providing versatile connectivity options.Powered by a 24V DC supply, the RF650R is built to withstand harsh environments, boasting an IP30 rating. Its temperature range spans from -25°C to +55°C, making it suitable for various industrial settings. It's important to note that this product is sold without accessories and antennas.

The limit switch, categorized under the XC Standard range, operates with a linear movement of the operating head and is equipped with a spring return metal roller plunger. Designed for lateral approach in two directions, it supports a maximum actuation speed of 0.5 m/s.With a body made of plastic, this switch has dimensions of 30mm in width, 16mm in depth, and 70.4mm in height, weighing 0.08kg. The fixed PVR insulated cable enables electrical connections with a length of 1 meter. It is rated IP65 for dust and water resistance and IK04 for impact protection.This device is capable of withstanding a rated operational current of 1.5A at 240V AC and 0.1A at 250V AC, ensuring reliability across various industrial machine applications including packaging, materials handling, and food processing. It has a mechanical and electrical durability of 5 million operating cycles.Compliance with multiple standards such as CSA C22.2 No 14, UL 508, and EN/IEC 60947-5-1 ensures its suitability for various environments. The product also adheres to sustainability practices, being mercury-free and classified as a Green Premium product.

The XS7 inductive proximity sensor, with dimensions of 15 x 32 x 8 mm, is equipped with a PBT housing, ensuring mechanical durability and resistance to chemicals. It operates within a voltage range of 12 to 24 V DC, featuring reverse polarity protection. This sensor is designed for surface mounting, facilitated by two screw fixing points.With an IP67 protection rating, it is suitable for harsh environments, functioning effectively in temperatures ranging from -25°C to +70°C. The sensor's standard M8 connector ensures compatibility with existing sensor cabling in the market. It includes a yellow LED indicator for output status, aiding in sensor setup and troubleshooting.This model is certified under C-Tick, CSA, and UL standards, making it reliable for various applications. The XS7 sensor is suitable for flush mounting and has a switching capacity of ≤ 100 mA DC, with overload and short-circuit protection. It is capable of detecting objects within an operational zone of 0-4 mm and supports a switching frequency of up to 2000 Hz.

The RF630T ETSI On-Metal Transponder is designed to operate within the ISO 18000-6C framework, featuring a compact form factor of 21 x 21 mm. This device operates at a frequency range of 865 to 868 MHz as per ETSI regulations and is equipped with the NXP G2XM chip, which provides an EPC of 240 bits along with 64 bytes of additional memory. Constructed with a plastic housing, the transponder is rated with a maximum transmission range of 2000 mm, ensuring effective communication in various applications. It is suitable for environments that demand high durability, as evidenced by its IP68/IPX9K protection rating, making it resistant to dust and water ingress. The operating temperature range of this device spans from -25 to +85 degrees Celsius, allowing it to function reliably in a variety of conditions. This product is available with a minimum order quantity of 10 units.

The inductive standard sensors are tailored for reliable object detection in metal contexts. With a dimension of Ø 4 x 41 mm, these sensors are constructed for flush mounting and offer a sensing range of 1.5 mm. They utilize a PNP Normally open (NO) switching output and can operate at a switching frequency of up to 5000 Hz. Designed to endure challenging conditions, the sensors feature a stainless steel housing and a PBT sensing surface, ensuring durability against dirt and contamination. The operating voltage ranges from 10 to 30 VDC, and they function effectively in ambient temperatures between -25 °C and 70 °C. Compliance with IP67 standards guarantees protection against dust and water ingress. These sensors are equipped with a 3-pin M8x1-Male connector for seamless integration into existing systems. The inductive sensors also carry multiple approvals including cULus, CE, EAC, and WEEE, confirming their reliability and adherence to safety standards. A broad selection of over 500 preferred types is available globally for swift delivery, making these sensors a practical solution for various applications.

This Harmony XB5,head and mounting base is used for potentiometer application. This head and mounting base for potentiometer provides an ergonomic external interface for controlling your machines thanks to its knurled knob head. It is ideal for controlling key parameters of automation components like drives and inverters and is easily installed and replaced on compatible potentiometers. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. It has a metal bezel, this makes it ideal for applications requiring high impact and vibration resistance. It is designed to fit in a standard 22mm cutout, ensuring compatibility when installing in pre-existing machinery. Its wide range of operating temperatures from -40°C to 70°C allows versatility in usage of product.

This rectangular sensor is specifically intended for VigiPacT type A residual current protection and monitoring relays, enabling precise current measurements up to 3200A.With a transformer ratio of 1/1000, this sensor is designed to ensure accurate monitoring and protection. Its dimensions are 470mm x 160mm, and it weighs 20kg. The sensor accommodates wiring sizes from 0.5 to 2.5 mm², with a maximum wiring length of 10m.Operating within temperatures ranging from -35 to 80 °C, it also features an ambient air temperature for storage of -55 to 100 °C. The sensor is compliant with IEC 60947-2 standards and offers an IP30 degree of protection for the body and IP20 for connectors.It is constructed to withstand environmental conditions, with compliance to IEC 60068-2-30 and IEC 60068-2-52 for exposure to damp heat and salt mist, respectively. The pollution degree is rated at level 3 according to IEC 60664-1. This sensor is compatible with various VigiPacT relays, including RH10M, RH10P, and RH99P, among others.

This XS cylindrical (M12 thread) inductive proximity sensor has a PPS sensing face and a nickel plated brass case. It has a supply voltage of 24V to 240V AC/DC. This general purpose threaded cylindrical inductive proximity sensor is flush mountable and has an increased sensing range. It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. Corrosion-resistant and non-magnetic nickel plated brass provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance. It has an annular LED for easy sensor status viewing, setup and troubleshooting. IP65 and IP68 protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+70°C). It features double insulation for better people and system protection from electrical shocks. It is CSA, UL certified.

The XS1 inductive proximity sensor is engineered for the detection of metallic objects without physical contact, minimizing wear and enabling the detection of delicate or freshly painted items. With an increased sensing range and flush mountable design, this cylindrical sensor has a diameter of 6.5mm and a length of 42.5mm.Constructed from nickel-plated brass, it features a three-wire DC connection with an M8 male connector. The sensor operates within a supply voltage range of 12 to 24 VDC and utilizes an NPN solid-state output with a normally open (NO) function.With an IP65 and IP67 rating, the device is suitable for use in harsh industrial environments. It can withstand temperatures ranging from -25 to 70 °C and offers vibration and shock resistance compliant with IEC standards. The nominal sensing distance is 2.5mm, with a response time of 0.2 ms and a maximum switching frequency of 2500 Hz. This sensor is part of the Telemecanique inductive proximity sensors XS range, designated for general-purpose applications.

The magnetic-field-resistant inductive sensors 516-326-S4-CW are specifically engineered for deployment in high magnetic field environments, such as those found in welding and induction hardening applications. These sensors exhibit insensitivity to magnetic interference from electric welding currents reaching up to 25 kA.Constructed with robust materials, these sensors feature a protective housing designed to withstand challenging conditions. The design integrates a sensing surface optimized for accurate detection, while the connection type ensures straightforward installation. With an ambient temperature range accommodating diverse operational conditions, these sensors maintain functionality even under extreme environments.Moreover, the sensors meet high standards of protection, as indicated by their IP rating, making them suitable for various industrial environments. Their switching frequency and output capabilities further enhance their versatility, allowing integration into a wide array of systems.

The MA120 closed toroid is specifically engineered for use with Vigilohm Insulation Fault locators and VigiPacT type A residual current protection and monitoring relays. It facilitates the monitoring of the injected component from the Vigilohm Insulation Monitor, supporting up to a rated current of 250A for effective monitoring and protection.With an inner diameter of 120 mm, this toroid has a weight of 0.450 kg. The cables must be properly centered within the toroid, ensuring that their combined outer diameter does not exceed 60 mm. The maximum cross-sectional area per phase (R, S, T, N) for copper conductors is 240 mm², allowing for substantial current handling capabilities.Operating within a temperature range of -35 to 70 °C, the MA120 is compliant with various environmental standards, including IEC 60947-2. It is designed to withstand exposure to damp heat and salt mist, classified under pollution degree level 3 as per IEC 60664-1. The product features a transformer ratio of 1/1000, making it suitable for various applications in equipment monitoring and control.

This safety position switch is engineered to provide a secure locking mechanism, capable of withstanding forces up to 2600 N. It offers flexibility in its application, supporting five different directions of approach. The auxiliary release on the front ensures easy operation, while the magnet voltage monitoring feature at 24 V DC adds an extra layer of safety and reliability.The switch comes with a spring-loaded mechanism for added durability and longevity. It also features a non-contact/normally open (NC/NO) monitoring system, ensuring that the switch is functioning correctly at all times. The magnet 2 NC/1 NO is supplied without an actuator, allowing for customization based on specific application needs.For those requiring an actuator, we recommend the 3SE5000-0AV0. Please order this separately to ensure compatibility and optimal performance.

The inductive sensors, characterized by a diameter of Ø 6.5 x 50 mm, are specifically engineered for reliable object detection in metallic contexts. With a non-flush installation style, these sensors operate without contact, ensuring they are wear-free and resistant to dirt and other contaminants.These sensors support a switching output of PNP Normally open (NO) and can achieve a switching frequency of 4000 Hz. Their robust stainless steel housing combined with a sensing surface made of PBT enhances durability, making them suitable for demanding environments. The sensors operate effectively within an ambient temperature range of -25 to 70 °C, with a maximum temperature drift of over 15% between 50 and 70 °C.Furthermore, they feature a connector type of M8x1-Male, 3-pin, and an operating voltage of 10-30 VDC. With an IP68 rating, these sensors are well protected against dust and water ingress, ensuring consistent performance. The extensive offering includes over 500 preferred types, available globally for timely delivery, compliant with various approvals including CE, cULus, EAC, and WEEE.