Sensores de proximidad e inductivos

The XUSL2E Type 2 Safety Light Curtain is specifically designed for detecting personnel in proximity to hazardous equipment. It employs a transmitter-receiver mechanism that generates two light beams at a protective height of 510 mm. This product is characterized by a PFHd reliability data of 1.71 x 10⁻⁸, ensuring dependable safety operation.Constructed with an aluminum casing, the product includes integral LEDs for local status indication. It can function independently or in conjunction with a compatible safety control unit. The system features two normally open solid-state PNP safety outputs (OSSDs) and adheres to category 2, performance level PL c, and SIL 1 requirements as specified in EN/ISO 13849-1, EN/IEC 61508, alongside Type 2 compliance per EN/IEC 61496-1 and EN/IEC 61496-2.Operating within a temperature range of -30°C to +55°C, the device supports selectable sensing distances of either 0 to 4 meters or 0 to 12 meters, determined by wiring. Additionally, the installation is facilitated by fixing brackets, and the product is equipped with an M12 connector for electrical connections.

The limit switch, categorized under the XC Standard range, operates with a linear movement of the operating head and is equipped with a spring return metal roller plunger. Designed for lateral approach in two directions, it supports a maximum actuation speed of 0.5 m/s.With a body made of plastic, this switch has dimensions of 30mm in width, 16mm in depth, and 70.4mm in height, weighing 0.08kg. The fixed PVR insulated cable enables electrical connections with a length of 1 meter. It is rated IP65 for dust and water resistance and IK04 for impact protection.This device is capable of withstanding a rated operational current of 1.5A at 240V AC and 0.1A at 250V AC, ensuring reliability across various industrial machine applications including packaging, materials handling, and food processing. It has a mechanical and electrical durability of 5 million operating cycles.Compliance with multiple standards such as CSA C22.2 No 14, UL 508, and EN/IEC 60947-5-1 ensures its suitability for various environments. The product also adheres to sustainability practices, being mercury-free and classified as a Green Premium product.

Universally configurable frequency transducer for converting frequency (Hz/rpm) and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS 1033202. Screw connection technology.

The XUSL Type 4 Safety Light Curtain is specifically designed for detecting the presence of hands in hazardous areas, ensuring operator safety around machinery. It employs a transmitter-receiver system that generates 16 light beams, effectively covering a protected height of 310 mm.This device is characterized by its PFHD reliability data of 8.2 x 10⁻⁹, which signifies its high safety performance. The aluminum casing enhances durability, while integral LEDs provide local signaling for clear visibility of operational status. The system can function independently or in conjunction with a compatible safety control unit.Equipped with two normally open (NO) solid-state PNP safety outputs (OSSDs), it adheres to rigorous safety standards, achieving category 4 compliance, performance level PL e, and SIL 3 as outlined in EN/ISO 13849-1, EN/IEC 61508, and EN/IEC 61496-1/2. The operating temperature range spans from -30°C to +55°C, allowing for versatility in various environments, with selectable sensing distances of either 0 to 4 meters or 0 to 12 meters, depending on wiring configurations.

The XUB photoelectric emitter, designed for a supply voltage range of 12 to 24 VDC, utilizes an infrared thru beam emission system. With a cylindrical design measuring 18 mm in diameter and a length of 60 mm, it is equipped to function in extreme temperatures, operating between -25°C and +55°C. The housing is made from PBT, ensuring durability in demanding environments, while the lens is constructed from PMMA for scratch resistance.This emitter features a standard M12 connector for compatibility with existing sensor cabling. It has a maximum sensing distance of 20 m and requires a receiver for detection. The device supports a current consumption of 35 mA with a switching frequency of up to 500 Hz. Its IP65, IP67, and IP69K ratings ensure protection against dust and water ingress, making it suitable for harsh conditions.Additionally, the sensor is equipped with a single LED indicator for operational status and features double insulation for enhanced safety against electrical shocks. The XUB emitter is also compliant with various safety standards, including CSA and UL, highlighting its reliability in industrial applications. The product is recognized as a Green Premium offering, emphasizing its sustainable design.

The 3D fixing kit, equipped with a ball-joint mounting bracket, is specifically tailored for M12 rods associated with XUM photoelectric sensors. This design enhances flexibility, allowing for optimal alignment of the sensor beam in relation to various applications.Compatible with the XUZC50 and XUM models, this accessory falls under the category of mounting and fixing accessories. It serves miniature sensors effectively, ensuring that installations are both secure and adaptable to specific needs.It is important to note that this product aligns with sustainability standards, being classified as a Green Premium product. It is free from mercury and complies proactively with the EU RoHS Directive, although it contains substances of concern as indicated by the REACH Regulation. Caution is advised due to California Proposition 65 warnings regarding potential exposure to certain chemicals.

The PIR fixture mount sensor is designed for installation in outdoor lighting fixtures, offering the ability to manage lighting levels through motion detection and daylight sensing. It effectively controls 0-10 VDC dim-to-off LED drivers and ballasts, or can be integrated with a power pack for additional load management. When paired with an FSP-Lx Lens, this sensor is rated for use in wet and cold environments, ensuring reliable operation under diverse conditions.Configuration of all control parameters is facilitated through a wireless tool that not only allows adjustments but also stores and transmits specific sensor profiles. This ensures that users can customize settings to meet their specific needs efficiently.Dimensions of the unit are practical, measuring 1.0 inches in width, 2.0 inches in depth, and 3.7 inches in height, with a weight of 0.17 pounds. The overall product volume is 13.32 cubic inches. Additionally, it is produced in China and carries an environmental profile, underscoring its compliance with ecological standards.

The XUK photoelectric sensor is part of the XU range, designed for various applications including material handling and packaging. With a compact design measuring 50mm x 50mm, this sensor utilizes a polarised reflex detection system, achieving a nominal sensing distance of 12 m when paired with the appropriate reflector (XUZC50HP).It is equipped with a 4-pin M12 male connector and offers programmable output options, either normally open (NO) or normally closed (NC) in a discrete PNP configuration. The sensor operates within a supply voltage range of 10 to 30 VDC, featuring reverse polarity protection and a no-load current consumption of ≤60mA. Its switching frequency can reach up to 2000Hz, making it suitable for fast-paced environments.This product is rated IP67 and IP69K, ensuring robust protection against dust and water ingress, which is essential for operations in challenging environments. The enclosure is constructed from ABS/PC with a PMMA lens, allowing it to function effectively in temperatures ranging from -20°C to 60°C during operation and -20°C to 80°C during storage.In terms of safety certifications, it complies with Ecolab, CE, and cULus standards. Additionally, the sensor features two status LEDs: one for output state and another indicating supply status. The overall dimensions are 23mm in width, 50mm in depth, and 50mm in height, with a total weight of 0.035kg.

The XS Inductive Proximity Sensor is a cylindrical device with a PPS sensing face and a nickel plated brass case. It operates at a supply voltage of 24V to 240V AC/DC, making it versatile for various applications. This sensor features an increased sensing range and is flush mountable, allowing for direct installation on surfaces or brackets. Its outer thread and twin nuts facilitate easy mounting. Constructed from corrosion-resistant and non-magnetic nickel plated brass, this sensor provides magnetic shielding to enhance accuracy and immunity to magnetic disturbance. It also features an annular LED for convenient status viewing, setup, and troubleshooting. The XS Inductive Proximity Sensor is IP65 and IP68 rated, ensuring it can withstand harsh environments. It is capable of operating in extremely cold (-25°C) and hot (+70°C) conditions. With double insulation for enhanced safety, this sensor offers protection from electrical shocks. It has been CSA and UL certified, ensuring its reliability and compliance with industry standards.

Introducing the Steel Roll Plunger Position Switch, a high-quality device designed for precision and reliability. This switch is built to meet the stringent standards of EN 50041, ensuring compatibility with a wide range of applications. Key Features: Dimensions: 40 mm Device Connection: M20 x 1.5 Contacts: 1 NO/1 NC (Normally Open/Normally Closed) Roller Material: Stainless Steel, 13 mm Diameter The Steel Roll Plunger Position Switch is equipped with slow-action contacts for precise and controlled operation. Its stainless steel roller ensures durability and resistance to corrosion, making it ideal for demanding industrial environments.

The set comprises a Rogowski coil with a measuring transducer, specifically the PACT RCP-4000A-1A-D95-10M. The Rogowski coil has a length of 300 mm and a diameter of 95 mm, with a signal line extending 10 m, enabling accurate measurement of AC currents in various applications.Constructed with double insulation and reinforced insulation in accordance with IEC 61010-1, this device operates under an overvoltage category of III (1000 V to neutral conductor), suitable for environments with pollution degree 2. The typical measuring error is less than 1%, while the accuracy class is rated at 0.2 according to IEC 61869-10: A1. It features surge protection through a 33 V suppressor diode.The Rogowski coil is capable of handling a frequency range from 45 Hz to 65 Hz, with maximum detectable harmonics below 2 kHz. It requires a nominal supply voltage of 24 V DC, with a permissible range of 19.2 V DC to 30 V DC, and has a maximum current consumption of 190 mA. The output signal at 50 Hz is 100 mV at a load of 1,000 A.For installation, the connection method is a screw connection, with a recommended tightening torque of 0.5 Nm to 0.6 Nm. The device is designed for DIN rail mounting and has an operational temperature range of -30 °C to 80 °C for the measuring coil and -20 °C to 70 °C for the measuring transducer.

The Photoelectric Sensor XU, XUB Receiver is constructed from PBT, ensuring durability and high-temperature resistance for demanding environments. This device functions effectively within a supply voltage range of 12 to 24 V DC and utilizes a mono-mode cylindrical design, measuring 18 mm in diameter and 46 mm in length.Designed for easy installation, the sensor can be mounted directly on surfaces or brackets, featuring an outer thread and twin nuts. Its PMMA lens is scratch-resistant, further enhancing the longevity of the sensor. The single LED display provides clear status indication, while the device operates on a discrete NPN output with a sensing distance of up to 20 meters when paired with a suitable transmitter.With a current consumption of 35 mA and a maximum switching frequency of 500 Hz, the sensor maintains reliable performance. It is certified under CSA, CE, and UL standards, ensuring compliance with safety regulations. The environmental operating temperature ranges from -25 to 55 °C, while it can withstand storage conditions from -40 to 70 °C. The sensor also features double insulation and is rated IP65/IP67 for protection against dust and water ingress.

Network cable, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, shielded (Advanced Shielding Technology), Plug straight RJ45 / IP20, on Socket straight M12 / IP67, coding: D, cable length: 5 m

The XS6 inductive proximity sensor, characterized by its M30 cylindrical design, integrates a PPS sensing face with a nickel-plated brass casing. It supports a supply voltage of 24V to 240V AC/DC, making it versatile for various applications. This sensor is engineered for flush mounting, equipped with an outer thread and twin nuts for secure installation on surfaces or brackets.With an IP67 rating in accordance with IEC 60529 and IP69K per DIN 40050, the sensor is well-suited for harsh environments. It maintains operational integrity in extreme temperatures, ranging from -25°C to +70°C. The nickel-plated brass material not only provides corrosion resistance but also enhances magnetic shielding, which improves detection accuracy and reduces interference from magnetic disturbances.For user convenience, the device features four LED viewports for monitoring status, facilitating setup and troubleshooting. The sensor operates with a switching capacity of 5 to 200 mA DC and 5 to 300 mA AC with a maximum delay response of 0.5 ms. Its design allows for effective sensing within a range of 0 to 12 mm, with an exceptional switching frequency of up to 500 Hz DC. The XS6 sensor is CSA and UL certified.

These capacitive sensors used for fill level detection detect the product, bulk material or liquids to be detected with their active surface in contact with the media. Their spherical electrical field effectively compensates for deposits on the sensing surface of the sensor.

The XS6 inductive proximity sensor is designed for non-contact detection of metal objects at distances up to 60 mm. Encased in a cylindrical M12 housing, this sensor is suitable for various applications, including assembly machinery, robotics, and food processing. The sensing capability is rated at a nominal distance of 4 mm, allowing for reliable performance in diverse environments.Engineered with an IP67 and IP69K protection rating, this sensor is built to withstand harsh conditions, making it ideal for industries that require durability and resilience. It is capable of functioning in extreme temperatures ranging from -25°C to +70°C. The device features a standard M12 male connector, ensuring compatibility with existing market sensor cabling.Additional features include a maximum switching frequency of 2500 Hz and a current consumption of less than 10 mA without load. The XS6 sensor also incorporates four LED viewports for clear visibility of the sensor status, aiding in setup and troubleshooting. Compliance with international standards including CE, UL, and CSA further enhances its reliability in industrial applications. The sensor's construction with nickel-plated brass and PPS materials ensures longevity and operational stability.

The photoelectric sensor XUK is designed for precise detection in various environments, featuring a compact dimension of 50 x 50 mm. It operates within a supply voltage range of 12 to 24 VDC and utilizes a PBT enclosure that ensures durability even in high-temperature settings.With a nominal sensing distance of 1 meter and a maximum detection range of 1.5 meters, this sensor is equipped with a PMMA lens that resists scratches and contributes to its longevity. The unit supports a standard M12 connector, facilitating compatibility with existing sensor cabling in the market.In terms of performance, the sensor consumes a maximum of 35 mA during no-load conditions and has a switching frequency of up to 250 Hz. It features a yellow LED indicator for output state visibility. The device is certified with CE, CSA, and UL standards, ensuring compliance with safety regulations.Operating temperatures range from -25°C to +55°C, making it suitable for diverse applications. The sensor also includes double insulation for enhanced protection against electrical shocks, meeting rigorous environmental standards.

This product is a safety position switch designed to provide enhanced security and reliability. It features a tumbler locking mechanism that can withstand a force of up to 2600 N, ensuring robustness in various environments. The switch supports five directions of approach, allowing for flexible installation.The switch is housed in a metal enclosure, providing durability and protection against harsh conditions. It is equipped with an M12 connector, enabling seamless integration into existing systems. The device is ASIsafe integrated, ensuring safe operation and compliance with industry standards.Channel 1 of the switch is connected to actuator 1 NC, while Channel 2 is connected to magnet 1 NC. The switch also features a spring-loaded emergency release at the rear and an auxiliary release on the front. Monitoring capabilities are provided for actuator 2 NC/1 NO and magnet 2 NC/1 NO.Please note that the matching separate Actuator 3SE5000-0AV0 must be ordered separately to complete the system. This product is a high-quality safety switch designed to meet the demanding needs of industrial applications.

3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4) mA ... 20 mA, output signal 0(4) mA ... 20 mA. The device can be used in both isolator and repeater power supply operation. push-in connection technology

The XUSL4E Type 4 Safety Light Curtain is intended for operator body detection in environments with hazardous machinery. It operates using a transmitter-receiver system that generates two light beams, providing a protected height of 510 mm. The device's PFHD reliability is recorded at 6.89 x 10⁻⁹, ensuring a high level of safety performance.This unit can function independently or in conjunction with a suitable safety control unit. It is equipped with two NO Solid State PNP safety outputs (OSSDs) and complies with category 4, performance level PL e, and SIL 3 standards as outlined in EN/ISO 13849-1, EN/IEC 61508, and EN/IEC 61496 series.Operating within a temperature range of -30°C to +55°C, the sensing distance can be configured for 0 m to 4 m or 0 m to 12 m via wiring. The unit features an aluminum casing, with local signaling provided by integral LEDs to indicate device status clearly. The electrical connections include a male connector M12 with 5 pins for the transmitter and an 8-pin connector for the receiver. The current consumption is 42 mA for the no-load transmitter and up to 900 mA for the maximum load receiver.