Bridgeport Fittings

When used with a locknut, conduit nipples serve as a short raceway between enclosures.

Threaded bodies for rigid conduit or IMC allows access for inspection, pulling and maintenance.

Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Liquidtight connectors are suitable for use in Class I, Div 2; Class II, Div 1 and 2; and Class III, Div 1 and 2 hazardous locations.

Threaded bodies for rigid conduit or IMC allows access for inspection, pulling and maintenance.

Used to secure EMT to box or enclosure.

Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Liquidtight connectors are suitable for use in Class I, Div 2; Class II, Div 1 and 2; and Class III, Div 1 and 2 hazardous locations.

Used to join two lengths of EMT. 1/2" through 1 1/4" Concrete-tight, 1 1/2" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with aluminum or steel EMT.

Used to secure steel EMT to box or enclosure. Concrete tight when taped.

45 Degree connector for use with metallic liquid tight conduit. Insulated Throat. Liquidtight connectors are suitable for use in Class I, Div 2; Class II, Div 1 and 2; and Class III, Div 1 and 2 hazardous locations.

Used to connect flexible metal conduit to box or enclosure.

High power for long wire runs or for applications requiring greater power such as door openers. Ideal for large apartments, and building elevators.

Allows access to the interior of a conduit system for inspection, pulling and maintenance.

Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance.

90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. Liquidtight connectors are suitable for use in Class I, Div 2; Class II, Div 1 and 2; and Class III, Div 1 and 2 hazardous locations.

Threaded bodies for rigid conduit or IMC allows access for inspection, pulling and maintenance.

Used to join EMT to rigid or IMC. Concrete-tight.

Allows access to the interior of a conduit system for inspection, pulling and maintenance.

Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance.

Clamp type entrance cap for rigid conduit and IMC. 3 holes 1 3/4" dia.; 4 holes 1 1/8" dia. Listed for use with Rigid/IMC/EMT.