Neutrik Piezas de Repuesto para Automatización Industrial

The 6 pole male receptacle, part of the DLX series, is designed with a compact all-metal housing that incorporates a duplex ground contact, delivering superior RF protection and shielding. This receptacle is compliant with IEC 61076-2-103 standards and features a protection class of IP 40, ensuring durability in various environments.With a temperature range of -30 °C to +80 °C, it is suitable for a wide range of applications. The receptacle offers a capacitance between contacts of ≤ 7 pF and a contact resistance of ≤ 5 mΩ, making it effective for high-performance connectivity. The dielectric strength is rated at 1.5 kVdc, while the insulation resistance exceeds 10 GΩ initially.Mechanically, the receptacle is built for longevity, with a lifetime of over 1000 mating cycles and a maximum insertion and withdrawal force of ≤ 20 N. It supports wire sizes up to 1.0 mm² or 18 AWG, with solder contacts for secure connections. The locking device features a latch lock mechanism, and the chassis is shaped as type D.The materials used include brass contacts with a 0.2 µm gold plating over a 2 µm nickel layer, ensuring excellent conductivity. The insert is made of polyamide (PA 6.6 30 % GR), while the shell is constructed of zinc diecast (ZnAl4Cu1) with black chromium plating for enhanced corrosion resistance.

etherCON CAT6A cable connector self-termination, for insulation diameter > 1.1 mm, black plating The set NE8MX6-B includes a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and wire gauge of AWG24/1 - AWG22/1 (solid) or AWG24/7 - AWG22/7 (stranded). Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B. If the insulation diameter is ≤ 1.1 mm please refer to NE8MX-B-T.

5 pole male cable connector with black metal housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Professional locking 1/4" cable jack for secure in-line connections. Black metal housing, silver contacts, excellent cable protection The 3 pole phone cable jack in-line version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab.

5 pole male cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

etherCON CAT6A cable connector self-termination, for insulation diameter > 1.1 mm, nickel plating The set NE8MX6 consists of a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A compliant RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and wire gauge of AWG24/1 - AWG22/1 (solid) or AWG24/7 - AWG22/7 (stranded). Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B. If the insulation diameter is ≤ 1.1 mm please refer to NE8MX6-T.

RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of nickel shell, bushing and boot. Packed with two cable protection elements for cable diameter up to 8 mm. Cable connector carrier does not include a RJ45 plug. The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution. ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP-*. The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

Isolated BNC bulkhead for panel mount, feedthrough Neutrik's BNC bulkhead for panel mount offer a true 75 Ω design for serial and digital (HD & UHD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.

The BNC 75Ω Female to XLR Chassis Connector 110Ω Male is a reliable solution for interfacing balanced and coaxial lines. This connector offers a robust design, ensuring durability and reliability in demanding applications. It features a female BNC input with a 75Ω impedance rating and a male XLR output with an 110Ω impedance rating. The connector's chassis is designed for easy installation and removal, making it ideal for various applications.

6 pole male cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

The D-shape CAT6A panel connector is designed with a shielded IDC termination and incorporates a rubber sealing for enhanced durability. This connector achieves an IP65 rating when mated, ensuring protection against dust and water ingress. The nickel housing offers additional resilience in various environments.This model supports a temperature range from -40 °C to +70 °C and is built to withstand over 1000 mating cycles, making it suitable for demanding applications. The connector's dielectric strength is rated at 1 kVdc, and it features an insulation resistance greater than 0.5 GΩ, ensuring reliable performance in data transmission.It is important to note that this connector does not intermate with CAT6 cable connectors NE8MC6-MO and NKE6S*. The product is part of the etherCON CAT6A Series, designed specifically for robust network connections while supporting Power over Ethernet (PoE+) in accordance with IEEE 802.3at standards.

The 4 pole male XLR receptacle is designed for vertical PCB mounting and includes a grounding feature that connects a separate ground contact to the mating connector shell and front panel. This model aligns with the A series but incorporates a metal mounting flange that provides continuous circumferential ground contact to the chassis, enhancing electromagnetic compatibility (EMC).It complies with IEC 61076-2-103 standards and boasts a flammability rating of UL 94 HB. The receptacle has a protection class of IP 40, ensuring adequate resistance against solid objects. Operating within a temperature range of -30 °C to +80 °C, this component can withstand various environmental conditions.In terms of electrical specifications, it supports a rated current of 6 A and a rated voltage below 50 V. The dielectric strength is rated at 1.5 kVdc, while the insulation resistance exceeds 10 GΩ initially. The receptacle exhibits a low contact resistance of less than 6 mΩ and a capacitance between contacts of no more than 7 pF.Mechanically, the receptacle features an insertion and withdrawal force of up to 20 N, with a lifespan exceeding 1000 mating cycles. The locking device employs a latch lock mechanism, and the mounting direction is rear-facing, secured with an A-screw. The components are constructed from durable materials, including brass for the contacts, polyamide for the insert, and zinc diecast for the ring, ensuring longevity and reliable performance.

The Grounded BNC bulkhead connector is engineered for panel mount installation and is compatible with a variety of signal types including HD, SDI, Video, AES/EBU, Composite, YUV, RGB, RGBH, and RGBHV UHD. This connector maintains a true 75 Ω design, ensuring optimal performance for high-definition applications. Constructed with a machined brass body, it provides a durable and non-abrasive connection suitable for prolonged use. The connector features an insertion force of less than 25 N and is rated for over 1000 mating cycles, highlighting its reliability in various environments. The locking device employs a bayonet mechanism, facilitating secure mounting. With a dielectric strength of 1.5 kVdc and insulation resistance exceeding 5 GΩ, this connector guarantees safe and effective operation within a temperature range of -30 °C to +85 °C. The design also incorporates an outer contact resistance of ≤ 2 mΩ and an inner contact resistance of ≤ 3 mΩ, ensuring minimal signal loss. The chassis shape is specified at 12.7 mm diameter for proper fitment.

The 5-pole male XLR receptacle is designed to facilitate switching operations with contacts that activate upon mating. This configuration allows for the monitoring and control of the connected state. The receptacle includes both normally open and normally closed contacts, enhancing its functionality.Constructed with a round plastic body, this XLR PCB mount panel connector achieves a high packing density with a center distance of 23 mm. It utilizes newly designed fork-type contacts, which are plated with hard gold and feature polished contact surfaces for improved performance.This model complies with the IEC 61076-2-103 standard and has a flammability rating of UL 94 HB. It offers a protection class of IP 40 and operates within a temperature range of -30 °C to +80 °C. The receptacle supports a rated current of 3 A per contact and a rated voltage of less than 50 V.With an insertion and withdrawal force of less than 20 N, it ensures ease of use. The component is built for durability, exceeding 1000 mating cycles and featuring a latch lock for secure mounting. The vertical PCB mounting design allows for efficient wiring, with the grounding option connected to the mating connector shell and front panel, separate from Pin 1.

The BNC feed through coupler is designed for optimal performance with a true 75 Ω configuration, making it ideal for high-definition and standard definition signals including HD, SDI, and Video. The connector is crafted with a machined brass body, ensuring durability and a non-abrasive connection over extended use. Operating within a temperature range of -30 °C to +85 °C, this female connector exhibits low contact resistance, with values of ≤ 3 mΩ for the inner contact and ≤ 2 mΩ for the outer contact. Its dielectric strength reaches 1.5 kVdc, while insulation resistance exceeds 5 GΩ. The rated voltage is under 50 V. Additionally, the coupler maintains a Voltage Standing Wave Ratio (VSWR) of ≤1.03/>37 dB up to 1 GHz, ≤1.05/>32 dB up to 2 GHz, and ≤1.08/>28 dB up to 3 GHz. Mechanically, the insertion force is measured at less than 25 N, and it supports over 1000 mating cycles, featuring a bayonet locking mechanism for secure connections. The contacts are made from brass (CuZn39Pb3), while the insert is constructed from PTFE, providing excellent performance and reliability.

This 4 pole female XLR receptacle is engineered with a separate ground contact that connects to both the mating connector shell and the front panel, ensuring optimal grounding. It is designed for vertical PCB mounting, making it suitable for a variety of applications.Distinct from the A series, this component includes a metal mounting flange that provides continuous circumferential ground contact to the chassis, enhancing electromagnetic compatibility (EMC) performance.It complies with the IEC 61076-2-103 standard and offers a protection class of IP 40. The receptacle is constructed to withstand a temperature range of -30 °C to +80 °C and meets flammability standards of UL 94 HB. Its electrical specifications include a rated current of 6 A per contact and a dielectric strength of 1.5 kVdc.With an insertion force of no more than 20 N and a lifespan exceeding 1000 mating cycles, this receptacle provides reliable performance over time. The materials used include bronze contacts, a polyamide insert, and a zinc diecast ring, ensuring durability and functionality.

The 3 pole male receptacle is designed with solder cups and a velour chromium housing, providing a combination of durability and aesthetic appeal. This product is part of the DLX-HE Series and features gold contacts for enhanced conductivity. Constructed with high-temperature resistant materials, the receptacle complies with industry standards including IEC 61076-2-103. The device operates effectively within a temperature range of -30 °C to +80 °C and meets UL 94 V-0 flammability ratings, ensuring safety and reliability in various applications. With a rated current of 16 A and a voltage rating below 50 V, this receptacle offers low contact resistance of ≤ 5 mΩ and a dielectric strength of 1.5 kVdc. The insulation resistance is > 10 GΩ, contributing to its robust performance. Its mechanical features include a maximum insertion and withdrawal force of 20 N, as well as a lifespan exceeding 1000 mating cycles. The design accommodates wire sizes up to 2.5 mm² (14 AWG) and utilizes solder contacts with a latch lock for secure connections. Material specifications include a contact plating of 0.2 µm Au over 2 µm Ni, with brass contacts and a shell made of zinc diecast with velour chromium plating for enhanced corrosion resistance.