Control e HMI Sick

The Sick Flexi Soft FX3-CPU130002 Safety Controller is designed to provide flexible and efficient safety solutions for industrial automation systems. This main module, configurable via the Flexi Soft Designer software, ensures high safety standards with SIL 3 (IEC 61508) and PL e (EN ISO 13849) certifications. The controller supports safe SICK device communication and safe networking through Flexi Link, making it ideal for complex safety applications.The FX3-CPU130002 features two EFI interfaces and a configuration and diagnostics interface via RS-232, ensuring seamless integration and communication within your system. With a protection class of III (EN 61140) and an enclosure rating of IP20 (EN 60529), this controller is built to withstand demanding industrial environments.Additional benefits include a wide operating temperature range of -25°C to +55°C, overvoltage protection, and a mission time of 20 years, ensuring long-term reliability and performance. The system plug must be ordered separately, and the module comes with a terminal plug spring for the EFI interface, safety instructions, and downloadable operating instructions.

The UE4740 EFI gateway connects intelligent SICK safety sensors to the PROFINET PROFIsafe fieldbus. It has two EFI interfaces for connecting up to four SICK safety sensors, which allows the use of expanded sensor functionalities. The UE4740 EFI gateway makes it possible to exchange a configurable process image between the EFI sensors and the PLC via PROFINET IO PROFIsafe. This EFI gateway is configured using CDS configuration software CDS, which helps provide simple configuration and diagnostics information.

The Sick MSC800-0000 is a robust and versatile logic module designed for efficient data output, parameterization, and analysis. This module is equipped with multiple connectivity options, including serial interfaces, Ethernet, PROFIBUS DP, and CAN bus, making it suitable for a wide range of industrial applications.Key Features:MTBF: > 80,000 hoursMTTR: Power Supply Voltage: 24 V DCPower Consumption: 10 W (typical)Serial Interfaces (RS-232, RS-422/-485): Data output, parameterization, analysisEthernet: Data output, parameterization, analysis (10 MBit/s / 100 MBit/s, TCP/IP, FTP, Half/Full duplex)PROFIBUS DP: Data output, parameterization, analysis (12 MBaud)CAN Bus: Data output, parameterization, analysis (20 kbit/s ... 1 Mbit/s, CANopen protocol)Digital Switching Inputs: 14 (PNP, configurable, optically isolated, reverse polarity protected)Digital Switching Outputs: 4 (PNP, configurable, short-circuit protected)Relay Outputs: 2 (potential-free)USB Interface: Micro USB type BService Interface: Service socketOptical Indicators: 2 x LED on power supply module, 6 x LED on safety module, 48 x LED on logic moduleEnvironmental Specifications:Operating Temperature: 0 °C ... +40 °CStorage Temperature: –20 °C ... +70 °CRelative Humidity: 95 %, non-condensing

Los accesorios Módulos y pasarelas, puerto IO-Link V1.1 Clase A, puerto USB2.0, fuente de alimentación externa opcional 24V / 1A de SICK es un componente versátil y esencial para las aplicaciones industriales modernas. Diseñado para facilitar la comunicación fluida entre dispositivos, este módulo ofrece una conectividad robusta y un rendimiento fiable.Características principales:Puerto IO-Link V1.1 Clase APuerto USB2.0Fuente de alimentación externa opcional 24V / 1ACon su clase de protección IP20, este módulo garantiza durabilidad y protección contra el polvo y otras partículas, lo que lo hace adecuado para diversos entornos industriales. La inclusión de un cable USB y una fuente de alimentación en el paquete simplifica la instalación y la configuración, lo que permite una rápida integración en los sistemas existentes.AplicacionesEste módulo es ideal para su uso en:Sistemas de fabricación automatizadosAutomatización industrialControlde procesos Al proporcionar una comunicación confiable y eficiente entre dispositivos, los módulos de accesorios y las puertas de enlace mejoran la productividad y agilizan las operaciones, lo que los convierte en una valiosa adición a cualquier configuración industrial.

The Sick i110R i110-RA223 Safety Switch is designed to provide dependable safety for industrial applications. This electro-mechanical safety switch features 2 positive action N/C contacts and 2 N/O contacts, ensuring reliable operation. It supports an actuation frequency of up to 6,000 cycles per hour and requires an actuation torque of at least 0.34 Nm. The switch can be actuated from four different directions, with an approach speed ranging from 0.1 m/min to 15 m/min.Constructed with a durable zinc diecast housing and varnished surface treatment, the i110-RA223 is built to withstand harsh industrial environments. It boasts a mechanical life of up to 10 million switching cycles and an enclosure rating of IP66, providing excellent protection against dust and water ingress.Compliant with EN ISO 14119 standards, this Type 1 switch features uncoded actuator coding. In the event of a fault, the switch relies on the connected safety-related logic unit for fault detection, as it does not have internal fault detection capabilities. The switch supports individual wiring with diagnostics and features a slow action switching element, making it suitable for usage categories AC-15 and DC-13 as per IEC 60947-5-1.With a rated operating current of 3 A at 240 V AC and 3 A at 24 V DC, the i110-RA223 ensures reliable performance. It also offers a rated insulation voltage of 250 V and a rated impulse withstand voltage of 2,500 V AC. The switch is equipped with a cable gland connection type (1 x M20) and supports conductor cross sections up to 2.5 mm².The Sick i110R i110-RA223 Safety Switch is certified with EU and UK declarations of conformity, cULus certification, and TÜV approval, ensuring compliance with international safety standards. Ideal for a wide range of industrial applications, this safety switch provides robust and reliable protection for personnel and equipment.

The Sick FX3-XTIO84002 Flexi Soft Safety Controller is an advanced I/O module designed for high-demand safety applications. Configurable via software such as Flexi Soft Designer and Safe EFI-pro System: Safety Designer, this module ensures optimal safety with a SIL 3 (IEC 61508) rating and Category 4, PL e (EN ISO 13849) performance level. It features 8 safety inputs, 2 test outputs, and 4 safe outputs, making it highly versatile for various industrial applications.With a fast shut-off time of just 8 ms, the FX3-XTIO84002 guarantees rapid response in critical situations. The module is Flexi Loop-compatible, enhancing system flexibility and scalability. It operates with a voltage supply via FLEXBUS+ and offers robust protection with short-circuit protected PNP semiconductors.Engineered for reliability, the FX3-XTIO84002 boasts a mission time of 20 years and complies with multiple international standards, including EN 61140 and EN 60529. Its compact design (22.5 mm x 96.5 mm x 120.6 mm) and plug-in spring terminals facilitate easy installation and maintenance.This module is ideal for use in safety-critical environments where fast and reliable response is paramount, ensuring the highest level of protection for both personnel and machinery.

The Sick Flexi Soft FX3-CPU000000 Safety Controller is a versatile and high-performance main module designed for flexible and efficient safety applications. Configurable via the Flexi Soft Designer or Safe EFI-pro System: Safety Designer software, this controller ensures optimal safety integration and management. The system plug must be ordered separately to complete the setup.Features: The FX3-CPU000000 supports a wide range of safety-related parameters, including SIL 3 (IEC 61508), Category 4 (EN ISO 13849), and PL e (EN ISO 13849). It boasts a mean probability of a dangerous failure per hour (PFHD) of 1.07 x 10-9 and a mission time (TM) of 20 years.Interfaces: The controller features a system plug connection, plug-in spring terminals, and an RS-232 configuration and diagnostics interface (M8 female connector, 4-pin). It operates with a PELV or SELV voltage supply, with a supply voltage range of 16.8 V DC to 30 V DC and internal power consumption of ≤ 2.5 W.Electronics and Mechanics: The FX3-CPU000000 has a protection class of III (EN 61140) and an overvoltage category of II (EN 61131-2). It measures 22.5 mm x 96.5 mm x 120.6 mm and weighs approximately 111 g. The enclosure rating is IP20 (EN 60529), making it suitable for various industrial environments.Ambient Data: The controller operates within a temperature range of -25 °C to +55 °C and can be stored at temperatures between -25 °C and +70 °C. It supports air humidity levels of up to 95% (non-condensing).Certifications: The FX3-CPU000000 is compliant with multiple international standards, including EU, UK, ACMA, China-RoHS, CCC, cULus, KC Mark, cTUVus, S Mark, and EC-Type-Examination approvals.

The CDF600-2200 - V2.x, NetX51 is a highly reliable and versatile connection device designed for seamless integration with various industrial sensors and scanners. This device supports the PROFINET IO and RS-232 interfaces, making it ideal for a wide range of applications in industrial automation. The CDF600-2200 is compatible with the Lector series, CLV61x - CLV65x, CLV69x, RFID read/write devices, and mobile handheld scanners. It features integrated cloning module support (CMC) and provides robust data transmission capabilities with a baud rate of 57.6 kBaud and 2-port Ethernet in accordance with IEEE 802.3 standards.With an IP65 enclosure rating and a durable aluminum housing, the CDF600-2200 is built to withstand harsh industrial environments. It operates efficiently within a wide temperature range of –35 °C to +50 °C and supports non-condensing relative humidity of up to 90%. The device is equipped with six optical indicators (LEDs) for easy status monitoring and configuration software SOPAS ET for user-friendly setup and maintenance.Additionally, the CDF600-2200 complies with various international standards, including EN 61000-6-3/A1:2011-03 for electromagnetic compatibility, EN 60068-2-6:2008-02 for vibration resistance, and EN 60068-2-27:2009-05 for shock resistance. It holds multiple certifications such as CE, UKCA, ACMA, China RoHS, cULus, and Profinet, ensuring global regulatory compliance.