2701506

Additional Information

Part Number

2701506

UPC

4046356763585

Country of Origin

DE

ETIM

Group Code : EG000024

Group Description : PLC's

Class Description : Fieldbus, decentr. periphery - digital I/O module

Class Code : EC001599

Version : 7

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width

60 mm

Height

185 mm

Depth

38 mm

Note on dimensions

The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).

Drill hole spacing

198.5 mm

System limits of the bus coupler

Designation

PROFIBUS DP

Equipment type

PROFIBUS slave

System-specific protocols

PROFIBUS protocols DP V1

Supply

Designation

Actuators (UA) for additional devices

Connection method

M12 connector (T-coded)

Number of positions

4

Supply voltage

24 V DC

Supply voltage range

18 V DC - 31.2 V DC (including all tolerances, including ripple)

Current consumption

typ. 3 mA ±15 % (at 24 V DC)

Digital inputs

Input name

Digital inputs

Description of the input

EN 61131-2 types 1 and 3

Connection method

M12 connector, double occupancy

Connection technology

4-wire

Number of inputs

16

Protective circuit

Overload protection, short-circuit protection of sensor supply

Nominal input voltage UIN

24 V DC

Nominal input current at UIN

typ. 3 mA

Input filter time

< 1000 µs

Cable length

max. 30 m (To the sensor)

Input voltage range "0" signal

0 V - 5 V DC

Input voltage range "1" signal

11 V DC - 30 V DC

Ambient conditions

Ambient temperature (operation)

-25 °C - 60 °C

Ambient temperature (storage/transport)

-25 °C - 85 °C

Permissible humidity (operation)

5 % - 95 %

Permissible humidity (storage/transport)

5 % - 95 %

Air pressure (operation)

70 kPa - 106 kPa (up to 3000 m above sea level)

Air pressure (storage/transport)

70 kPa - 106 kPa (up to 3000 m above sea level)

Degree of protection

IP65/IP67

Environmental Product Compliance

REACh SVHC

Lead 7439-92-1

China RoHS

Environmentally Friendly Use Period = 25;

China RoHS

For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Electrical isolation

Test section

24 V supply (communications power and sensor supply, digital inputs/outputs)/bus connection 500 V AC 50 Hz 1 min.

Test section

24 V supply (communications power and sensor supply, digital inputs/outputs)/FE 500 V AC 50 Hz 1 min.

Test section

Bus connection / FE 500 V AC 50 Hz 1 min.

Test section

24 V supply (actuator supply)/24 V supply (communications power and sensor supply, digital inputs/outputs) 500 V AC 50 Hz 1 min.

Test section

24 V supply (actuator supply)/bus connection 500 V AC 50 Hz 1 min.

Test section

24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min.

Digital outputs

Output name

Digital outputs

Connection method

M12 connector, double occupancy

Connection technology

3-wire

Number of outputs

16

Protective circuit

Overload protection, short-circuit protection of outputs yes

Output voltage

24 V DC

Nominal output voltage

24 V DC (from voltage US)

Maximum output current per channel

500 mA

Nominal load, inductive

12 VA (1.2 H, 48 Ω, with nominal voltage)

Nominal load, ohmic

12 W (48 Ω, with nominal voltage)

Switching frequency

max. 5500 per second (with at least 50 mA load current)

Output voltage when switched off

max. 1 V

Output current when switched off

max. 20 µA

Behavior with overload

Auto restart

Reverse voltage resistance to short pulses

Reverse voltage proof

Interfaces

Designation

PROFIBUS DP

No. of channels

2

Connection method

M12 fast connection technology

Note on the connection method

B-coded

Designation connection point

Copper cable

Transmission speed

9.6 kbps - 12 Mbps (Automatic baud rate detection)

Transmission physics

PROFIBUS-DP-compliant copper cable

Address area assignment

1 - 126, adjustable

Number of positions

5

Standards and Regulations

Mechanical tests

Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g

Mechanical tests

Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, half-sine shock pulse

Mechanical tests

Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g

Protection class

III (IEC 61140, EN 61140, VDE 0140-1)

Modelos CAD

Rastrear piezas

Descargar