Phoenix Contact 2900297

The relay module PLC-RPT-230UC/21HC is designed for applications involving high continuous currents, incorporating a PLC-BPT.../21 HC basic terminal block with a Push-in connection system. It is suitable for installation on a DIN rail NS 35/7.5 and can handle a limiting continuous current of up to 10 A. The module operates with an input voltage of 230 V AC/DC, ensuring versatile compatibility in various settings.

With a mechanical service life rated for 3x10⁷ cycles and an operating factor of 100%, this module is built for durability. It includes one changeover contact and features safe isolation with reinforced insulation, making it compliant with the overvoltage category III and pollution degree 3 standards. The maximum power dissipation under nominal conditions is 0.99 W, and the rated surge voltage is 6 kV.

Its typical input current at nominal voltage (UN) is 4.3 mA at 220 V DC, and it has a typical response time of 7 ms, with a release time of 10 ms. The contact material is AgNi, supporting a maximum switching voltage of 250 V AC/DC, while the minimum switching voltage is 12 V at 10 mA. The device can withstand a maximum inrush current of 30 A for 300 ms and has a switching capacity of 2 A at 24 V DC13.

Dimensions are compact, with a width of 14 mm, height of 80 mm, and depth of 94 mm. The module operates effectively within an ambient temperature range of -40 °C to 55 °C, ensuring reliable performance in various environmental conditions. Compliance with IEC 60947-5-1...