Phoenix Contact 2967879

The PLC-INTERFACE consists of a basic terminal block with screw connections and a plug-in miniature solid-state relay, designated as PLC-OSC-120UC/230AC/ 1. This module is designed for DIN rail installation and includes a single normally open (N/O) contact.

It operates with an input voltage of 120 V AC or 110 V DC, while its output voltage ranges from 24 to 253 V AC, with a maximum continuous current of 0.75 A. The device is built to accommodate a wide input voltage range of 108 V AC to 132 V AC, ensuring reliable operation within specified parameters.

Constructed for universal applications, this relay module supports a 100% operating factor and features basic insulation along with an overvoltage category of III and a pollution degree of 2. With a typical input current of 4 mA, the relay responds within 10 ms for both turn-on and turn-off conditions.

Regarding installation, the relay module includes a screw connection method with a conductor cross-section accommodating both rigid and flexible wires from 0.14 mm² to 2.5 mm², and it requires a stripping length of 8 mm for proper connection. The tightening torque is specified between 0.6 Nm and 0.8 Nm. The dimensions of the module are 6.2 mm in width, 80 mm in height, and 94 mm in depth, with a housing color of gray (RAL 7042).

Suitable for ambient temperatures ranging from -25 °C to 60 °C during operation, and up to 70 °C during storage or transport, this relay module complies with IEC 60947-5-1 standards, ensuring its...