ATV340D15N4

Specifications

Variant

standard version

Product Or Component Type

variable speed drive

Ip Degree Of Protection

IP20

Phase

3 phase

Communication Port Protocol

Modbus serial

Nominal Output Current

32.0 A

Product Specific Application

machine

Maximum Horse Power Rating

25 hp normal duty || 20 hp heavy duty

Supply Frequency

50...60 Hz +/- 5 %

Option Card

communication module, Profibus DP V1 || communication module, PROFINET || communication module, DeviceNet || communication module, CANopen || communication module, EtherCAT

Range Of Product

Altivar Machine ATV340

Motor Power Kw

18.5 kW normal duty || 15 kW heavy duty

[Us] Rated Supply Voltage

380...480 V - 15...10 %

Mounting Mode

cabinet mount

Emc Filter

class C3 EMC filter integrated

Environment

Product Certifications

UL || CSA || TÜV || EAC || CTick

Maximum Deflection Under Vibratory Load (During Operation)

1.5 mm at 2...9 Hz

Standards

IEC 61800-3 || IEC 61800-5-1 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || UL 618000-5-1 || UL 508C

Regulation Loop

adjustable PID regulator

Permitted Relative Humidity (During Operation)

class 3K5 according to EN 60721-3

Operating Altitude

<= 9842.52 ft (3000 m) with current derating above 1000m

Overvoltage Category

class III

Environmental Class (During Operation)

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Maximum Acceleration Under Shock Impact (During Operation)

70 m/s² at 22 ms

Pollution Degree

2

Electromagnetic Compatibility

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency immunity test level 3 IEC 61000-4-6

Ambient Air Temperature For Operation

-15-50 °C without derating vertical position) || 50-60 °C with derating factor vertical position)

Volume Of Cooling Air

128.0 m3/h

Marking

CE

Maximum Acceleration Under Vibrational Stress (During Operation)

5 m/s² at 9...200 Hz

Noise Level

55.6 dB

Ambient Air Temperature For Storage

-40-70 °C

Type Of Cooling

forced convection

Isolation

between power and control terminals

Assembly Style

with heat sink

Operating Position

vertical +/- 10 degree

Ambient Air Transport Temperature

-40-70 °C

Complementary

Prospective Line Isc

22 kA

Power Dissipation In W

natural convection 18 W 380 V 4 kHz heavy duty) || forced convection 346 W 380 V 4 kHz heavy duty) || natural convection 21 W 380 V 4 kHz normal duty) || forced convection 411 W 380 V 4 kHz normal duty)

Line Current

37.4 A 380 V normal duty) || 30.2 A 480 V normal duty) || 44.9 A 380 V heavy duty) || 35.7 A 480 V heavy duty)

Line Current

44.9 A 380 V without line choke heavy duty) || 35.7 A 480 V without line choke heavy duty) || 42.4 A 380 V with external line choke normal duty) || 34.1 A 480 V with external line choke normal duty) || 45.5 A 380 V with external line choke heavy duty) || 36.0 A 480 V with external line choke heavy duty)

Analogue Output Type

software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1 0...20 mA 500 Ohm 10 bits

Discrete Output Type

programmable output DQ1, DQ2 30 V DC 100 mA

Electrical Connection

screw terminal 0.2...2.5 mm² control || screw terminal 6...25 mm² line side || screw terminal 6...25 mm² DC bus || screw terminal 4...25 mm² motor

Asynchronous Motor Control Profile

variable torque standard || optimized torque mode || constant torque standard

Maximum Switching Current

relay output R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2C resistive, cos phi = 1 5 A 250 V AC || relay output R2C resistive, cos phi = 1 5 A 30 V DC || relay output R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC

4 Quadrant Operation Possible

true

Apparent Power

28.3 kVA 480 V normal duty) || 29.7 kVA 480 V heavy duty)

Net Weight

9.5 kg

Type Of Polarization

no impedance

Relay Output Type

relay outputs R1A || relay outputs R1C 100000 cycles || relay outputs R2A || relay outputs R2C 100000 cycles

Switching Frequency

2...16 kHz adjustable || 7...16 kHz with derating factor

Maximum Transient Current

42.9 A 60 s normal duty) || 48 A 60 s heavy duty) || 52.7 A 2 s normal duty) || 58 A 2 s heavy duty)

Analogue Input Number

2

Motor Slip Compensation

automatic whatever the load || adjustable || not available in permanent magnet motor law || can be suppressed

Discrete Output Number

2.0

Method Of Access

slave Modbus RTU

Number Of Addresses

1-247

Discrete Input Number

5

With Safety Function Safe Stop 1 (Ss1)

true

Width

180.0 mm

Transmission Rate

4.8 kbit/s || 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s

Depth

249.0 mm

Analogue Input Type

AI1 software-configurable current 0...20 mA 250 Ohm 12 bits || AI1 software-configurable temperature probe or water level sensor || AI1 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI2 software-configurable voltage - 10...10 V DC 31.5 kOhm 12 bits

Electrical Connection

control screw terminal 0.2...2.5 mm² AWG 24...AWG 12 || line side screw terminal 6...25 mm² AWG 8...AWG 3 || DC bus screw terminal 6...25 mm² AWG 8...AWG 3 || motor screw terminal 4...25 mm² AWG 10...AWG 3

Maximum Output Frequency

0.599 kHz

With Safety Function Safe Brake Management (Sbc/Sbt)

true

Height

385.0 mm

Acceleration And Deceleration Ramps

linear adjustable separately from 0.01...9999 s || S, U or customized

Maximum Output Voltage

480 V

Base Load Current At High Overload

32.0 A

Transmission Frame

RTU

Relay Output Number

2

With Safety Function Safe Torque Off (Sto)

true

Data Format

8 bits, configurable odd, even or no parity

Base Load Current At Low Overload

39.0 A

Connector Type

1 RJ45

Pollution Degree

2 IEC 61800-5-1

Analogue Output Number

2

Physical Interface

2-wire RS 485

Minimum Switching Current

relay output R1B 5 mA 24 V DC || relay output R2C 5 mA 24 V DC

Discrete Input Logic

16 preset speeds

Continuous Output Current

39 A 4 kHz normal duty || 32 A 4 kHz heavy duty

Brake Chopper Integrated

true

Output Voltage

<= power supply voltage

Nominal Switching Frequency

4 kHz

Braking To Standstill

by DC injection

Discrete Input Type

PTI programmable as pulse input 0-30 kHz, 24 V DC 30 V) || DI1...DI5 safe torque off, 24 V DC 30 V)3.5 kOhm || programmable

Protection Type

thermal protection motor || safe torque off motor || motor phase loss motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent drive || output overcurrent between motor phase and earth drive || output overcurrent between motor phases drive || short-circuit between motor phase and earth drive || short-circuit between motor phases drive || motor phase loss drive || DC Bus overvoltage drive || line supply overvoltage drive || line supply undervoltage drive || input supply loss drive || exceeding limit speed drive || break on the control circuit drive

With Safety Function Safely Limited Speed (Sls)

true

Synchronous Motor Control Profile

reluctance motor || permanent magnet motor

Offer Sustainability

Mercury Free

Yes

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Upgradeability

Upgraded components available

Rohs Exemption Information

Yes

Environmental Disclosure

ENVPEP1609006EN

Sustainable Offer Status

Green Premium product

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Circularity Profile

ENVEOLI1609006EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Modelos CAD

traceparts

Descargar