Aparatura niskiego napięcia

This Harmony RPM power plug-in relay has a coil control voltage of 24V DC and has 2 changeover contacts DPDT (double pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It also offers LED indicator to alert on the current status of the relay. It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere. This RPM product is IP40. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). Status display with LED, clearly signal both in the day and night. 0 0 0 0 0 0 0 0 0

This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 8A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

The FUSE BASE, LV HRC, 630A, 660VAC, 1-POLE is a high-quality fuse base designed for low voltage applications. It features a double busbar connection and is rated at 630A with a voltage of 690 V (1000 V). The fuse base is made from durable materials to ensure long-lasting performance and reliability. Key Features: Double busbar connection for improved conductivity Rated at 630A with a voltage of 690 V (1000 V) Made from durable materials for long-lasting performance and reliability

The Harmony Series XB4 Illuminated Push Button is designed for ergonomic and visual control of your machines. Its green flush design, coupled with a diameter of 22mm, provides a comfortable and intuitive interface. The spring return mechanism ensures reliable operation, while the integral transformer with LED illumination offers clear visibility even in challenging environments.This push button is easy to install into standard 22mm cut-outs using screw-clamp connections. It features an impact resistant, dust resistant, water resistant and vibration resistant design, making it ideal for use in harsh conditions. With its IP66/IP67/IP69/IP69K rating, this push button is built to withstand the rigors of industrial applications.

The AUX-C 1Q+1SY 250Vac/dc XT1...XT6 Fixed-Plug is a reliable and efficient solution for your electrical needs. This product features a changeover contact with open-closed indication, along with a trip indication for added safety.The AUX-C 1Q+1SY 250Vac/dc XT1...XT6 Fixed-Plug is designed to operate at 24V AC-DC and is wired on the circuit breaker. It is available in various fixed plug options, including XT1 through XT6.This product is ideal for a wide range of applications, from industrial settings to residential installations. With its robust construction and high-quality components, it ensures reliable performance and long-lasting durability.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 150A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 300A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

SUPPLEMENTARY PROTECTOR,2P,20A,CURVE B Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 2 Pole, 20 Amps, 480 VAC, Trip Characteristic Curve B, 36mm Width,70mm Depth, UL File E116386 in Vol. 1 Sec. 2

This Harmony SSP solid state panel mount single-phase relay is rated 50A, is controlled with a 3V to 32V DC input, has a rated load voltage of 24V to 300V AC with zero voltage switching, ideal for resistive loads. It has a visual indicator showing the status of its input and a alarm output enabling a quick response to unexpected events. It also has a test button for easy debugging, testing and commissioning. It is also silent and reliable thanks to the absence of moving contacts. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a low consumption 12 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.98 inches deep. It weighs 1.18 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor series is engineered to provide optimal performance in control systems. These contactors can be used as motor starters across a wide range of applications.TeSys D contactors are available in 13 different ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This particular 115A inductive 3 pole IEC contactor can be installed on DIN rail or directly onto a panel.The contactor offers both Horsepower and Kw motor ratings for international acceptance. It is rated for 30HP at 200 to 208VAC, 40HP at 240VAC, 75HP at 480VAC, and 100HP at 600VAC three-phase.When paired with a 480VAC up to 250A circuit breaker, the contactor can handle SCCR up to 100kA. When used with a 600VAC up to 250A circuit breaker, it can handle SCCR up to 50kA. When used with 600VAC Class J or CC fuses up to 250A, the contactor can handle SCCR up to 100kA.The contactor comes with a 415 VAC 50/60 Hz coil. It has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections.The contactor measures 6.22 inches in height, 4.72 inches in width, and 5.35 inches in depth. It weighs 5.51 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the requirements of RoHS/REACh, making it a Green Premium product.

The Siemens Miniature Circuit Breaker, model number 5SY4340-8, is a high-quality electrical protection device designed for industrial applications. This breaker is rated at 400V and 10kA with a 3-pole configuration and a trip characteristic curve D. It features a compact design with dimensions of 54mm in width and 70mm in depth, making it suitable for installation in tight spaces.The breaker is UL1077 rated and complies with IEC standards. It is equipped with an IEC Mini Circuit Breaker, which ensures reliable protection against electrical faults. The device has a 480VAC rating and a trip current of 40 Amps.The Siemens Miniature Circuit Breaker is UL File E116386 listed in Vol. 1 Sec. 2, demonstrating its compliance with the highest safety standards. This breaker is an essential component for ensuring the safety and reliability of electrical systems in various industries.

This Multi9 C60BP is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 30A rated current and D tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 103mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

Safety relay for emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, 2 enabling current paths (1-channel), US = 24 V DC, fixed screw terminal block

LP1K0610BD is a compact 3-pole TeSys K contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 24V DC coil and 1NO auxiliary contact allowing easy integration to all control systems. LP1K0610BD is a 3-pole TeSys K contactor from Schneider Electric for simple motor applications rated up to 2.2kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it can be easily integrated into all control systems thanks to its 24V DC coil and 1NO built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 45mm wide, for DIN-rail and panel mounting. Ready for connection to all control systems thanks to a 24V DC control voltage and 1NO built-in auxiliary contact. Optimized for simple power applications. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

The TeSys D contactors are engineered for optimal integration into various control systems. They can be used to create motor starters for a wide range of applications. The contactors come in 13 different ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This specific IEC contact relay is a 4 pole model with four normally open power contacts. It has a 200A resistive load rating and is supplied with a 240 VAC 50/60 Hz coil. The contactor can be mounted on DIN rail or directly to a panel, using screw clamp terminals for load and auxiliary connections.The contactor measures 6.22 inches in height, 5.91 inches in width, and 5.20 inches in depth, weighing approximately 6.31 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and also meets the RoHS/REACh requirements, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 125A resistive load rating. Contactor is supplied with a 24 VDC coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 7.13 inches deep. It weighs 5.92 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This product is part of the CANopen range, an offer of connection components. This CANopen preassembled cable is an accessory of programmable logic controllers. The length of this cable is 3m. It is furnished with RJ45 and 9-way D-Sub (DE-09) female connector with integrated line terminator. It weighs 0.128kg. It is suitable for used in general machine control, conveying and packaging applications. This connection sub-base is suitable for use with CANopen bus. Compact and totally expandable, the Modicon M258 Logic Controllers are designated to the machine builders (OEMs) by offering performant solutions in terms of speed control, high speed counting, motion and communication networks.

Contactor,IEC,Sirius,Standard 3 Pole,Non-Reversing 110 - 127 AC/DC Coil Frame Size S6,150A Panel Mount 2 NO & 2 NC Auxiliaries No Suppression Lugs (Not Included) Terminals UL File E31519 in Vol.11 Sec. 5

This product is a UL1077 rated miniature circuit breaker that adheres to IEC standards. It features a single pole design and is rated for 100 amps, making it suitable for various applications. The trip characteristic curve C ensures reliable protection against overcurrent conditions. With a width of 27mm and a depth of 70mm, this circuit breaker is compact and easy to install. It is UL File E116386 listed in Vol. 1 Sec. 4.This miniature circuit breaker is designed for use with 230/400 V systems and has a high interrupting capacity of 10kA. Its single pole design makes it ideal for applications where space is limited, while its curve C trip characteristic ensures that it can handle a wide range of currents.This circuit breaker is also equipped with a UL listing, indicating that it meets the requirements of Underwriters Laboratories. This means that it has been tested and certified to meet safety standards for electrical equipment.

The TF42-24 Thermal Overload Relay is an economical electromechanical protection device designed for main circuits. It offers dependable and swift protection for motors in the event of overload or phase failure, boasting a trip class 10. The relay also includes temperature compensation, trip contact (NC), signal contact (NO), selectable automatic or manual reset, trip-free mechanism, STOP function, and trip indication. These overload relays can be directly connected to the block contactors.Key Features:Dependable and swift protection for motorsTrip class 10Temperature compensationTrip contact (NC) and signal contact (NO)Selectable automatic or manual resetTrip-free mechanismSTOP functionTrip indicationApplications:Ideal for protecting motors in industrial applications where overload or phase failure may occur.