Elektronika i płytki PCB

Stycznik nawrotny, TeSys K, 3P, AC-3, lt lub eq do cewki 440V 9A, 1 NC, 24VDC to kompaktowe i wydajne rozwiązanie do zastosowań silnikowych. Stycznik ten o natężeniu 9 A AC-3 4kW@400V, zawiera cewkę 24 V DC, styk pomocniczy 1NC, blokadę mechaniczną i wstępnie okablowany obwód nawrotny. Jego kompaktowa konstrukcja sprawia, że idealnie nadaje się do montażu na szynie DIN i panelu, zapewniając łatwą integrację ze wszystkimi systemami sterowania.Kluczowe cechy:Kompaktowa 3-biegunowa konstrukcjaZnamionowa cewka 9A AC-3 4kW@400V24V DCStyk pomocniczy 1NCBlokada mechanicznaWstępnie okablowany obwód nawrotnyZastosowania:Idealny do prostych zastosowań silnikowych, stycznik nawrotny TeSys K jest idealny do stosowania w różnych gałęziach przemysłu, w których niezbędne jest niezawodne sterowanie silnikiem. Jego zgodność z wieloma normami (IEC, UL, CSA, CCC, EAC, Marine) oraz certyfikat Green Premium (RoHs/Reach) zapewniają, że spełnia najwyższe standardy jakości i ochrony środowiska.

The TeSys D contactors are designed to provide seamless integration into control systems, offering versatility for diverse applications.These contactors come in 13 ratings, suitable for inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps. The 4 pole IEC contactor can be mounted on DIN rail or directly on a panel.The contactor features four normally open power contacts with a 60A resistive load rating. It comes with a 48VAC 50/60Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified.Screw clamp terminals are used for load and auxiliary connections, ensuring reliable connectivity. A comprehensive range of accessories facilitates meeting the demands of most applications.The contactor measures 4.80 inches in height, 2.76 inches in width, and 4.72 inches in depth, weighing 2.40 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets RoHS/REACh requirements.

SENTRON switch disconnector 3LD in molded-plastic enclosure , repair and maintenance switch with EMC plate, 3-pole Iu: 100A, AC23A 400V at 50/60Hz: 37kW, used with frequency converter: AC20 400V at 0-550Hz: 37kW, 1NO + 1NC 20-150ms leading,# molded-plastic encapsulation for metric cable gland, knob-operated mechanism, black, lockable in 0- and I-position, incl. cable shield clamps and hose clamps

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 115A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 30HP at 200 to 208VAC, 40HP at 240VAC, 75HP at 480VAC and 100HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with a 600VAC up to 250A circuit breaker, this contactor can have a SCCR up to 50kA. When used with 600VAC Class J or CC fuses up to 250A, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200-208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 40A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.73 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactors are designed for seamless integration into control systems. They can be used to create motor starters for various applications. These contactors come in 13 different ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This particular 4 pole IEC contactor is available in an open style, making it easy to mount on a DIN rail or directly on a panel. It features two normally open (NO) and two normally closed (NC) power contacts with a resistive load rating of 25A. The contactor also comes with a 24VDC coil and a transient suppressor module for added protection.In addition, the contactor has one normally open and one normally closed auxiliary contact built-in as standard. These contacts are mirror certified for enhanced reliability. The load and auxiliary connections are made through screw clamp terminals, ensuring secure and efficient connections.This IEC contactor is 3.35 inches tall, 1.77 inches wide, and 3.90 inches deep, weighing 1.16 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications. Furthermore, it meets the requirements of RoHS/REACh, making it an environmentally friendly option.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 220 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LC2D80F7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 80A AC-3 37kW@400V, it includes a 110V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D80F7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 37kW@400V. It includes a 110V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 182mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 110V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 1.2 million cycles at 80A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connection by screw clamp terminals.

LC2DT25E7 is a Schneider Electric 4-pole (4NO) TeSys D changeover contactor for AC-1 load applications up to 25A/690V. It provides 48V 50/60Hz AC coils, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), power and control connections by screw clamp terminals. Equipped with pre-wired changeover power connections, and mechanical interlock. Compact (90mm width), DIN-rail mounting, it procures high reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). With pre-wired changeover power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

PROFIBUS_conn Rs 485-3ES7972-0BA12-0xa0

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 95A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 150A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AF96 series of contactors from ABB is specifically designed to control power circuits up to 690 V AC and 220 V DC. These contactors are ideal for controlling 3-phase motors, non-inductive or slightly inductive loads. The AF96 series includes an electronic coil interface that accepts a wide range of control voltages from 24 V to 500 V at 50/60 Hz or 20 V to 500 V DC. Only four coils are needed to cover all these voltage ranges, providing flexibility and ease of use.Key Features:Main Poles and Auxiliary Contact Blocks: The AF96 series features three main poles and front and side-mounted add-on auxiliary contact blocks. These auxiliary contacts are mechanically linked and comply with Annex L of IEC 60947-5-1 for normal closed (N.C.) mirror contacts, complying with Annex F of IEC 60947-4-1.Control Circuit: The AF96 series can be operated using either AC or DC power sources.Accessories: A wide range of accessories is available for the AF96 series, providing additional functionality and customization options.

The 3-pole Switch-Disconnector is a front operated, base mounted device designed for reliable disconnection in industrial applications. It features a robust construction with a black IP65 rated handle and shaft, ensuring durability and protection against environmental factors.This switch-disconnector comes complete with a terminal bolt kit, making installation straightforward and efficient. Its 3-pole design allows for multiple connections, enhancing its versatility in various industrial settings.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a low consumption 12 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 42 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Styczniki TeSys D zostały zaprojektowane z myślą o doskonałej integracji z systemami sterowania. Mogą być używane do tworzenia rozruszników silnikowych do prawie każdego rodzaju zastosowań. Styczniki TeSys D są dostępne w 13 stopniach znamionowych do zastosowań w silnikach indukcyjnych do 150 amperów przy pełnym obciążeniu i obciążeniach rezystancyjnych do 200 amperów. Ten indukcyjny 3-biegunowy stycznik IEC 9A może być montowany na szynie DIN lub montowany bezpośrednio do panelu. Styczniki mają zarówno moc silnika, jak i moc znamionową kW do międzynarodowej akceptacji. Stycznik jest przystosowany do 20 KM przy 200-208 V AC, 25 KM przy 240 V AC, 60 KM przy 480 V AC i 60 KM przy 600 V AC trójfazowym. Stycznik jest również przystosowany do 7,5 KM przy 115 V AC i 15 KM przy 240 V AC jednofazowym. W przypadku użycia z wyłącznikiem automatycznym 480VAC do 35A, stycznik ten może mieć SCCR do 85kA. W przypadku użycia z bezpiecznikiem klasy J lub CC do 600VAC 25A, stycznik ten może mieć SCCR do 100kA. Stycznik jest dostarczany z cewką 24 VAC 50/60 Hz. Stycznik ma standardowo wbudowany jeden styk pomocniczy normalnie otwarty i jeden normalnie zamknięty. Styk NC posiada certyfikat lustrzany. Zaciski śrubowe służą do połączeń obciążeniowych i pomocniczych. Rozbudowana gama akcesoriów sprawia, że z łatwością spełni wymagania większości zastosowań. Stycznik ma 3,15 cala wysokości, 1,77 cala szerokości i 3,39 cala głębokości. Waży 0,71 funta. Stycznik jest certyfikowany zgodnie z normami UL, CSA, IEC, CCC, EAC i morskimi. Stycznik spełnia również wymagania RoHS/REACh, co czyni go produktem Green Premium.

TeSys Giga high power contactor, 3 poles (3 NO) for category AC-3 applications up to 400A 250kW@440V. It provides a 48-130V AC/DC wide band low consumption electronic coil and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 290mm x 140mm x 209mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.