Komponenty mechaniczne

The Class H, K, and R fuse blocks are compatible with all Class H, K, and R power fuses rated for 250 and 600V. These blocks support various connection types, including screw, pressure plate, box, and special order stud connectors, suitable for both stranded and solid copper or aluminum wires.Insulators are constructed from molded glass-filled polycarbonate (GFPC) or phenolic materials, exhibiting verified dielectric strength exceeding 2500V. The 100A fuse blocks include unique adder blocks that can be easily snapped onto 1-, 2-, or 3-pole configurations, allowing the creation of multipole segmented blocks as needed.All clips are manufactured from high conductivity tin-plated copper, with options for spring reinforced or non-spring reinforced clips available in 30A and 60A configurations. For 100A and higher, only spring reinforced clips are utilized. This product is designed for direct screw mounting and accommodates a wire range of 2/0-#12.

The Double Row Angular Contact Ball Bearing with a 20° contact angle is designed to accommodate bi-directional axial, radial, and moment loads within a single bearing unit. This configuration effectively combines two single-row bearings positioned back-to-back, allowing for a more compact axial space requirement. The bearing measures 45 mm in bore diameter, 85 mm outside diameter, and has a width of 30.2 mm.With a dynamic load capacity of 51,000 N and a static load capacity of 39,000 N, this bearing is suitable for various applications requiring reliable performance under significant loads. It operates efficiently at limiting speeds of 5,500 rpm when lubricated with grease and 7,500 rpm with oil. The open configuration allows for easy maintenance and lubrication access.

The Variable Speed Drive ATV32HU22M2 is engineered for synchronous and asynchronous motors, providing a rated power of 2.2 kW at a supply voltage range of 200V to 240V AC. This drive supports applications in complex machinery, such as conveyors, hoists, and textile machines, facilitating precise control and efficiency.With a compact width of 60 mm, it allows for easy installation on mounting plates, maximizing space utilization. The integrated Class C2 EMC filter enhances its performance while complying with electromagnetic compatibility standards. The drive features an adjustable switching frequency between 2 kHz and 16 kHz, allowing for optimized operation based on application needs.Local signaling is achieved through a bright LED display, indicating drive status and fault conditions, while the jog dial navigation button enhances user interaction. SoMove software compatibility allows for configuration transfer, reducing maintenance downtime by enabling quick setup for spare drives. This model also includes comprehensive protection features such as overcurrent and thermal protection, ensuring reliable operation under various conditions.For connectivity, the drive supports Modbus and CANopen protocols, facilitating integration into existing control systems. The operating environment is rated for temperatures between -10°C to 50°C without derating, making it suitable for diverse industrial settings.

The Festo Hydraulic Shock Absorber YSR-12-12-C is designed for optimal energy absorption in various industrial applications. With a stroke length of 12 mm and a maximum energy consumption of 10 J per stroke, this shock absorber ensures smooth and efficient operation. The self-adjusting cushioning feature allows for maintenance-free performance, adapting to different impact conditions automatically. This single-acting, pushing-mode shock absorber boasts a maximum impact speed of 3 m/s and a reset time of 0.2 seconds at room temperature, ensuring quick readiness for subsequent operations. The robust construction includes a high-alloy steel piston rod and a steel housing, providing durability and reliability even under moderate corrosion stress (CRC class 2). Compliant with RoHS standards and LABS (PWIS) conformity per VDMA24364-B2-L, this shock absorber is suitable for a wide range of environments with ambient temperatures ranging from -10 °C to 80 °C. Its versatile mounting options via lock nut make it easy to integrate into existing systems. Applications: Ideal for use in automation systems, machinery, and equipment where controlled deceleration and energy absorption are critical for performance and longevity.

The Festo Compact Cylinder ADVUL-12-30-P-A is a versatile and efficient double-acting cylinder designed for precise positioning in various automation systems. With a piston diameter of 12 mm and a stroke length of 30 mm, this compact cylinder offers reliable performance and durability.Key Features:Double-acting operation for enhanced controlElastic cushioning rings/plates on both sidesCorrosion-resistant materials for extended lifespanCompatible with proximity sensors for position detectionPerfect for:Automated assembly linesRobotic applicationsPrecision manufacturing

Honeywell's Rotary Actuators are renowned for their exceptional quality and performance within the HVAC industry. If you require a dependable actuator or motor that delivers trouble-free operation, consider specifying Honeywell. Our actuator products are designed to make precision straightforward with self-centering shaft adaptors, detachable access covers, and universal signal mode adaptors.The floating on/off and fail in place features of these actuators ensure reliable performance and ease of use. With a standard profile and 24 VAC power supply, these actuators are versatile and suitable for a wide range of HVAC applications.

Standard double acting, single rod version of the CQ2 compact cylinder. The CQ2 is available in bore sizes from 12mm to 100mm. It comes standard with male or female piston rod threads. It is possible to mount auto switches on any of the 4 surfaces.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The SMC MGPM12-40 Compact Guide Cylinder is designed to offer exceptional lateral load resistance, more than twice that of conventional stopper cylinders. This is achieved through the use of two types of guide rod bearings, making it suitable for a wide range of applications. The cylinder features four different mounting options and two-direction piping, providing flexibility in installation and operation. It is built with a slide bearing type and has a bore size of 12 mm with a standard stroke of 40 mm. The MGPM12-40 is manufactured without an auto switch but includes a built-in magnet for ease of use. This series is part of the MGP series, known for its compact design and robust performance. Although this specific model has been discontinued since April 2012, it has been replaced by the MGP_Z series, which continues to uphold the high standards of the MGP series.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The Festo ADN-32-25-I-P-A Compact Cylinder is engineered to deliver exceptional performance in a compact form factor. With a stroke length of 25 mm and a piston diameter of 32 mm, this cylinder is ideal for applications requiring precise and reliable motion control.Key Features:25 mm stroke length32 mm piston diameterISO 21287 complianceVersatile mounting optionsInternal thread piston rodCorrosion resistance class 2Applications:Designed for use in various industrial applications, the Festo ADN-32-25-I-P-A Compact Cylinder is perfect for environments where space is limited but performance cannot be compromised. Its robust construction and compliance with ISO standards make it suitable for automation systems, assembly lines, and other demanding settings.

The SKF 62205-2RS1 Deep Groove Ball Bearing is a single row bearing featuring integral seals on both sides. This versatile bearing is designed to accommodate radial and axial loads in both directions, making it suitable for a wide range of applications. With its low friction and high-speed capability, it is optimized for low noise and vibration, ensuring smooth and efficient operation. The integral sealing system significantly prolongs the bearing's service life by keeping lubricant in and contaminants out, reducing the need for maintenance.The robust and simple design of the SKF 62205-2RS1 ensures ease of mounting and reliable performance. Manufactured from high-quality bearing steel, this bearing offers durability and resistance to wear. It is ideal for applications where reliability and longevity are critical.Benefits:Integral sealing prolongs bearing service lifeLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsRequires little maintenance