Technika liniowa

The Festo Compact Cylinder ADVUL-12-30-P-A is a versatile and efficient double-acting cylinder designed for precise positioning in various automation systems. With a piston diameter of 12 mm and a stroke length of 30 mm, this compact cylinder offers reliable performance and durability.Key Features:Double-acting operation for enhanced controlElastic cushioning rings/plates on both sidesCorrosion-resistant materials for extended lifespanCompatible with proximity sensors for position detectionPerfect for:Automated assembly linesRobotic applicationsPrecision manufacturing

Honeywell's Rotary Actuators are renowned for their exceptional quality and performance within the HVAC industry. If you require a dependable actuator or motor that delivers trouble-free operation, consider specifying Honeywell. Our actuator products are designed to make precision straightforward with self-centering shaft adaptors, detachable access covers, and universal signal mode adaptors.The floating on/off and fail in place features of these actuators ensure reliable performance and ease of use. With a standard profile and 24 VAC power supply, these actuators are versatile and suitable for a wide range of HVAC applications.

Standard double acting, single rod version of the CQ2 compact cylinder. The CQ2 is available in bore sizes from 12mm to 100mm. It comes standard with male or female piston rod threads. It is possible to mount auto switches on any of the 4 surfaces.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The SMC MGPM12-40 Compact Guide Cylinder is designed to offer exceptional lateral load resistance, more than twice that of conventional stopper cylinders. This is achieved through the use of two types of guide rod bearings, making it suitable for a wide range of applications. The cylinder features four different mounting options and two-direction piping, providing flexibility in installation and operation. It is built with a slide bearing type and has a bore size of 12 mm with a standard stroke of 40 mm. The MGPM12-40 is manufactured without an auto switch but includes a built-in magnet for ease of use. This series is part of the MGP series, known for its compact design and robust performance. Although this specific model has been discontinued since April 2012, it has been replaced by the MGP_Z series, which continues to uphold the high standards of the MGP series.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The Festo ADN-32-25-I-P-A Compact Cylinder is engineered to deliver exceptional performance in a compact form factor. With a stroke length of 25 mm and a piston diameter of 32 mm, this cylinder is ideal for applications requiring precise and reliable motion control.Key Features:25 mm stroke length32 mm piston diameterISO 21287 complianceVersatile mounting optionsInternal thread piston rodCorrosion resistance class 2Applications:Designed for use in various industrial applications, the Festo ADN-32-25-I-P-A Compact Cylinder is perfect for environments where space is limited but performance cannot be compromised. Its robust construction and compliance with ISO standards make it suitable for automation systems, assembly lines, and other demanding settings.

The SMC MXH20-15 Compact Slide Table Cylinder is designed for applications requiring high rigidity and precise linear motion. This actuator features a compact design, making it ideal for space-constrained environments. The MXH series incorporates a high rigidity guide, ensuring stable and accurate performance in demanding industrial applications.The cylinder is double-acting, providing consistent force in both directions of movement. It is equipped with an auto-switch capability, allowing for easy integration into automated systems. The MXH20-15 is part of SMC's renowned MXH family, known for its durability and reliability in various industrial settings.With a bore size of 20mm and a stroke length of 15mm, this cylinder is suitable for a wide range of applications, including material handling, assembly, and packaging. The compact slide table design ensures smooth and precise movement, enhancing the overall efficiency of your automation processes.Engineered to meet the highest industry standards, the SMC MXH20-15 cylinder offers exceptional performance and longevity. Its robust construction and high-quality materials make it a dependable choice for engineers and integrators looking to optimize their systems.

The Bosch Rexroth High-Precision Ball Runner Block BSHP is designed for applications requiring exceptional rigidity and precision. This ball runner block, constructed from low-carbon steel, offers a normal accuracy class and low preload, making it ideal for dynamic applications. It features a flange design with standard height and width, ensuring compatibility with various linear guide rails.Pre-lubricated and maintained with Dynalub 510, the BSHP block guarantees long-lasting performance with minimal maintenance. The integrated complete sealing system provides robust protection against contaminants, enhancing the block's durability. The absence of a ball chain reduces friction fluctuations and ensures smooth operation even under external loads.Installation is versatile, with the ability to mount components from both the top and bottom. The block includes metal-threaded lubrication ports on all sides and a front-side mounting thread for additional components. Its high load capacity and stiffness in all load directions make it suitable for single block applications, providing increased rigidity under lifting and lateral loads.The BSHP block is compatible with all SNS/SNO ball guide rails and can be used for long-term lubrication. It maintains consistent load capacities in all four main movement directions, making it a reliable choice for high-precision linear motion systems.

The MGQM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts. Non-rotating accuracy ranging from +/-0.04 for 100 mm bore to +/-0.08 for 12 mm bore.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGPL is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The high precision ball bushing allows for smooth operation that ensures stable travel resistance, suitable for pushing and lifting applications.