Silniki elektryczne

SIMOTICS S SIMOTICS S-1FK7 SILNIK SYNCHRONICZNY 1FK7-CT PN=0,82 KW; UZK=600V M0=3NM (100K); NN=3000 obr./min; NATURALNE CHŁODZENIE POWIETRZEM, ROZMIAR RAMY IMB 5 (IM V1, IM V3) KOŁNIERZ 1 ZŁĄCZE ZASILANIA OBROTOWY ENKODER ABSOLUTNY JEDNOOBROTOWY 20-BITOWY Z INTERFEJSEM DRIVE-CLIQ (ENKODER AS20DQI) WAŁ Z ZAMONTOWANYM WPUSTEM, TOLERANCJA N; Z HAMULCEM PRZYTRZYMUJĄCYM O STOPNIU OCHRONY IP64;

SILNIK SYNCHRONICZNY SIMOTICS S 1FK7-CT PN=1,7 KW; UZK=600V M0=6NM (100K); NN=4500RPM; NATURALNE CHŁODZENIE POWIETRZEM, ROZMIAR RAMY IMB 5 (IM V1, IM V3) KOŁNIERZ 1 OBROTOWE ZŁĄCZE MOCY ABSOLUTNY ENKODER 20 BIT + 12 BIT MULTITURN Z INTERFEJSEM DRIVE-CLIQ (ENKODER AM20DQI) WAŁEK BEZ GWINTU, TOLERANCJA N; Z HAMULCEM ZATRZYMANYM KLASY OCHRONY IP64;

SIMOTICS S-1FL6 Operating voltage 3AC 400 V Pn=0.4 kW; Nn=3000 rpm M0=1.9 Nm; MN=1.27 Nm Shaft height 45 mm. with angle plug; incremental encoder 2500 incr./rev. plain shaft. Tolerance N without holding brake Degree of protection IP65 with sealing ring compatible with the converters SINAMICS V70 & V90

Silnik servo SIMOTICS S-1FK2 CT M0=6.5 Nm; PN = 1.71 kW przy nN=3000 obr./min (380-480 V); PN = 0.97 kW przy nN=1500 obr./min (200-240 V); Z hamulcem holdingowym; Stopień ochrony IP64; Wał D24x50 mm z wpustem; Enkoder absolutny 22-bit + 12-bit Multi-turn (enkoder AM22DQC); Z interfejsem OCC; Rozmiar złącza M23, obrotowe;

SIMOTICS S SYNCHRONOUS MOTOR 1FK7-CT PN=0,63 KW; UZK=600V M0=1,6NM (100K); NN=6000RPM; NATURAL COOLING, FRAME SIZE IMB 5 (IM V1, IM V3) FLANGE 1 POWER CONNECTOR ROTATABLE RESOLVER 2-POLE, WITH DRIVE CLIQ-INTERFACE PLAIN SHAFT, TOLERANCE N; W/O HOLDING BRAKE PROTECTION CLASS IP64;

Silnik synchroniczny SIMOTICS 1FK7-ct pn=0,63 KW uzk=600v m0=1,6nm (100k) nn=6000rpm chłodzenie naturalne, rozmiar obudowy imb 5 (im v1, im v3) kołnierz 1 złącze zasilania obrotowe enkoder absolutny 20 bit + 12 bit multiturn z interfejsem drive-cliq (enkoder am20dqi) wał z wpustem, tolerancja n z hamulcem zatrzymującym klasa ochrony ip64

Siemens SERVOMOTOR 1FL6 3AC 400V to wysokowydajny silnik przeznaczony do precyzyjnych zastosowań związanych z sterowaniem ruchem. Dzięki mocy znamionowej 1 kW i prędkości znamionowej 2000 obr./min ten serwomotor zapewnia wydajną i niezawodną pracę. Charakteryzuje się wysoką bezwładnością i konstrukcją silnika synchronicznego z magnesami trwałymi, zapewniając doskonałą stabilność i kontrolę.Wyposażony w enkoder absolutny (20-bitowy jednoobrotowy i 12-bitowy wieloobrotowy), silnik oferuje dokładne sprzężenie zwrotne położenia, niezbędne do zadań wymagających wysokiej precyzji. Silnik wyposażony jest w hamulec przytrzymujący o momencie przytrzymującym 12 Nm, zapewniający bezpieczne i stabilne pozycjonowanie podczas pracy.Stopień ochrony IP65 gwarantuje odporność na kurz i wodę, dzięki czemu nadaje się do trudnych warunków przemysłowych. Naturalny układ chłodzenia silnika oraz zgodność z normami CE i EAC zapewniają bezpieczną i wydajną pracę.Zaprojektowany z wałem o wysokości 65 mm i złączem kątowym, Siemens SERVOMOTOR 1FL6 jest łatwy do zintegrowania z różnymi aplikacjami. Jest kompatybilny z konwerterami SINAMICS V70 i V90, zapewniając bezproblemową łączność i kontrolę.Zastosowania: Ten serwomotor jest idealny do stosowania w systemach automatyki, robotyce, maszynach CNC i innych precyzyjnych aplikacjach sterowania ruchem.

SIMOTICS S-1FL6 SUPPLY VOLTAGE 230V 3AC PN=0.4KW;NN=3000RPM M0=1.27NM;MN=1.27NM SHAFT HEIGHT 30MM Encoder Absolute single-turn 21-bit PLAIN SHAFT. TOLERANCE N WITHOUT HOLDING BRAKE PROTECTION CLASS IP65 WITH OIL SEAL MATCHING DRIVE SINAMICS V90

SIRIUS, compact starter, direct starter 690 V, 24 V AC/DC, 50 ... 60 HZ, 3 ... 12 a, IP20, connection main circuit pluggable, without terminals, connection auxiliary circuit pluggable, without terminals

SIMOTICS S SYNCHRONOUS MOTOR 1FT7, M0=2NM (100K) NN=6000RPM, PN=0,88KW NATURAL AIR COOLING; POWER CONNECTOR ROTATABLE VIBRATION SEVERITY GRADE A PROTECTION CLASS IP 65; FRAME SIZE IMB 5 (IM V1, IM V3) FLANGE 1 (1FT6 COMPATIBLE) INCREMENTAL ENCODER 2048 S/R WITH DRIVE-CLIQ INTERFACE (ENCODER I-2048) CONNECTOR ROTATABLE PLAIN SHAFT, WITH HOLDING BRAKE; ACCURACY TOLERANCE N

The Siemens 1FK7-ct pn=0,82 KW uzk=600v m0=3nm (100k) nn=3000rpm motor is designed for natural air cooling with a frame size of IMB 5. It features a flange 1 power connector that is rotatable and comes with an absolute encoder singleturn 20 bit with drive-cliq interface (encoder as20dqi). The shaft is fitted with a key, providing tolerance N without holding brake protection class IP64.

The Siemens S-1FL6 is a robust servomotor designed for industrial applications. With an operating voltage of 230 V, 3AC, it delivers a nominal power of 0.4 kW and rotates at a speed of 3000 rpm. The motor offers a torque range from 1.27 Nm to 1.27 Nm with a shaft height of 30 mm.Equipped with an incremental encoder that provides 2500 increments per revolution, this servomotor features a tolerance of N and comes with a holding brake for secure operation. It boasts a degree of protection rating of IP65, ensuring it can withstand harsh environments. The motor is compatible with Siemens' SINAMICS V90 converters, making it an ideal choice for automation systems.

TeSys U standard control unit to be inserted in power bases LUB12, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 5.5kW@400V. It provides full protection to motors with a rated current Ir 3-12A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 24V AC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The TeSys Island direct starter, featuring 3 poles and a capacity of 38A/690V, is designed to be connected to a TPRBC bus coupler. This combination allows for the control, protection, and monitoring of loads up to 38A and motors up to 18.5kW@400V / 20hp@480V. The starter provides motor protection functions such as thermal overload (setting 0.76-38A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, and ground current detection. In addition to protection, the TeSys Island motor starter also offers monitoring capabilities. It can track max/average voltages and currents, count switching cycles, record faults, and provide active and reactive power/energy when paired with a TPRVM001 voltage module. The starter is designed for easy mounting on DIN rail and is compatible with other modules in the TeSys island configuration. The TeSys Island motor starter is multi-standard certified (IEC, UL, CSA, CCC, EAC) and complies with Green Premium standards (RoHS/REACh).

The TF65-40 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

The TF42-16 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

The ABB PSTX250-600-70 is a versatile softstarter designed for medium to large-sized three-phase motors. It offers a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The control voltage ranges between 100...250 V AC at 50/60 Hz.The PSTX features a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It also includes relay outputs for RUN, TOR, and Event signals in NO (normally open state).The PSTX comes with functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. It also offers features like jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode.Interaction with the PSTX is facilitated through a detachable full graphic display with IP66 and 4x outdoor rating. Communication options include hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, built-in Fieldbus communication Modbus RTU, and optional ANYBUS modules with various protocols like Profinet, Profibus, Modbus TCP, Ethernet IP, and others.The ABB PSTX250-600-70 is the ideal solution for any motor starting application. It's suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications include pumps, fans, compressors, and conveyors.

This BMH Lexium 32 Servo Motor is a high-quality product that offers robust performance in medium load applications. It features a 10-pole design with a maximum mechanical speed of 6000RPM and an untapped shaft without holding brake, making it ideal for high-load applications. Equipped with a SinCos Hiperface® encoder (32768 points/turn), this servo motor provides automatic transmission of data from the servo motor to the servo drive. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 3.15A and a continuous power of 1.76W. The shaft dimensions are 19mm (Diameter) x 40mm (Length), and it is furnished with rotatable right-angled connectors for electrical connection. It is an IP54 rated product, measuring 128.6mm (Length) x 100mm (Width). The centring collar dimensions are 3.5mm (Depth) x 95mm (Diameter) with a 115mm circle diameter of the mounting hole. This servo motor is compatible with Lexium 32 servo drives and supports international standard 100mm flange mount with a natural convection cooling system. It comes with a 4-point axial mounting flange and is painted with RAL 9005 opaque black paint protective coating. Cables and connectors are not included and must be ordered separately. This servo motor is designed for high-load applications, allowing the movement to be adjusted in a more robust manner.

Steel EdgeTM motors offer the widest range of electrical and mechanical features of any motor on the market today. Steel EdgeTM can be used on pumps, fans, compressors, general industrial belt drive, direct drive and direct-connected equipment where 12-lead, wye-start/delta-run is required. Steel EdgeTM is also available as an inverter duty motor, meeting both Parts 30 and 31 of NEMA MG-1 standards.

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 17A in normal duty, it supplies motor from 4kW to 15kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 160mm (width) x 203mm (depth) x 275mm (height) and it weighs 4,9kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.