Silniki elektryczne

The ET 200PRO ERSE/RSSE HF Electronic Reversing Starter is a robust and reliable solution designed to provide full motor protection for a wide range of applications. It features electronic overload protection, thermistor, and is compatible with 3 AC power sources at 400V, delivering up to 0.9 kW with a current capacity ranging from 0.15 A to 2.00 A.This starter is designed without brake contact, making it ideal for applications where braking is not required. It comes with a compact design and is equipped with HAN Q4/2 - HAN Q8/0 connectors, ensuring easy installation and integration into various systems.

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 9A. This Altistart 01 can be used for a motor rated power up to 1.5kW or 2hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market, it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings, possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 9A. This Altistart 01 can be used for a motor rated power up to 1.5kW or 2hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 17A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 15hp (at 575V) / 15kW (at 690V) for standards applications and 10hp (at 575V) / 11kW (at 690V) for severe applications. It weighs 4.9kg and its dimensions are, 160mm wide, 275mm high, 190mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. It manages most critical processes while reducing downtime and increasing productivity as well as predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This motor management system is also a flexible system that supports six communication protocols which are Modbus™, CANopen, DeviceNet™, Profibus™, Ethernet/IP, and Modbus/TCP. TeSys T motor management system consist of several components which include the LTMR controller, the expansion module, HMI and software along with several accessories. The LTMR controller is the main component of the system that manages the basic functions. This includes the measurement of the ground current, motor temperature, three phase current of the motor, the controller also includes logic inputs and outputs which is used in fault management. The expansion module is directly connected to the controller and provides additional inputs as well as measure the voltage between the phases which allow the controller the monitor additional functions. TeSys T is highly reliable and has a very long product life thanks to a state-of-the-art component selection, to the all in one design and to the advanced electronic protection. TeSys T can be integrated in many different types of harsh environment such as dusty atmospheres, marine applications, high vibration applications and corrosive atmospheres and is used in Metal/Mining/Mineral, Oil & Gas, Water Wastewater. This is a TeSys T LTMR controller that measure current range of 5-100A with a supply voltage of 100-240 Vac and uses EtherNet/Modbus TCP/IP as the communication protocol. This controller measures temperature, phase current, imbalance current, average current and earth-fault current. The dimensions of this device are 61 mm (H) X 91 mm (W) X 122.5 mm (D) and it weighs 0.53 kg. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

The servo motor BMH is engineered for high-performance applications within the Lexium 32 series, which encompasses motors ranging from 0.15kW to 11kW. With a maximum mechanical speed of 6000 RPM, this 10-pole motor is equipped with a keyed shaft end and a holding brake, ensuring secure operation during stationary periods.Notably, it integrates a single-turn SinCos Hiperface® feedback system, offering a speed feedback resolution of 131,072 points per turn. The rated supply voltage stands at 480V, with a continuous stall current of 5.04A and continuous power output of 2.36W. Its dimensions include a shaft diameter of 19mm and a length of 40mm, complemented by a mounting flange size of 100mm.This device weighs 6.4kg and offers IP54 protection, making it suitable for various industrial environments. It features rotatable right-angled connectors for electrical connections, enhancing installation flexibility. The motor’s compatibility with the LXM32.D18N4 servo drive at 400V to 480V three-phase further broadens its applicability in sophisticated drive systems.In terms of sustainability, the BMH motor adheres to several environmental standards, being PVC free and compliant with RoHS regulations. It is designed with a focus on reducing environmental impact while maintaining operational efficiency.

This synchronous servo motor, part of the Lexium 32i series, features a maximum mechanical speed of 6000 RPM and is equipped with a keyed shaft end. The motor's shaft is rated IP54, while the housing has an IP65 rating, ensuring protection against dust and water ingress. The absence of a holding brake contributes to its lightweight design, which is 10.15 kg. The motor is optimized for medium to heavy load applications, with an output power of 480V and a continuous stall current of 4A.Utilizing an absolute single-turn encoder with a resolution of 32,768 points per turn, this motor facilitates precise control. It includes a printed circuit board connector for electrical connections and has a flange size of 100x100 mm, ensuring compatibility with standard mounting setups. The Lexium 32i range is particularly suited for applications that require high precision and advanced motor control.This motor meets several safety and environmental standards, including CE and UL certifications, and complies with UL 1004 standards. It is designed for compatibility with LXM32i control units, supporting various connection modules for power, fieldbus, network, I/O, and safety. All mounting positions are permissible, including horizontal (IMB5) and vertical (IMV1 and IMV3) orientations.

Belonging to the Lexium 32 series, this servo motor offers a peak stall torque of 30.8 N.m and is optimized for high-load applications, making it suitable for demanding environments. The motor operates at a rated supply voltage of 480V and features a continuous power rating of 2.85 W. Its design incorporates a keyed shaft and an IP54 rating, ensuring protection against dust and water ingress.Featuring a SinCos Hiperface® encoder with a resolution of 32768 points per turn, this device facilitates automatic data transmission between the motor and the servo drive, enabling precise control and synchronization of motion. The motor's dimensions include a length of 152mm and a width of 140mm, with a centering collar diameter of 130mm, and it weighs 8 kg.With a continuous stall current of 8.58 A and a robust construction using neodymium iron boron (NdFeB) magnets, the BMH servo motor supports a natural convection cooling system and is compatible with various Lexium 32 servo drives. The four-point axial mounting flange provides flexibility for installation in different setups.

TeSys Ultra Standard Control Unit: This control unit is designed to be inserted in power bases LUB32 and LUB38, forming a TeSys U starter controller. It is ideal for 3-phase motor applications up to 15kW@400V. This unit offers comprehensive protection for motors with adjustable rated current ranging from 8A to 32A and overload tripping class 10. It also includes short circuit protection at 13 times the maximum current, overcurrent protection at 14.2 times the rated current, phase loss, and insulation fault (protection of equipment only). The TeSys Ultra Standard Control Unit is compatible with a voltage range of 110-240V AC or 110-220V DC for controlling the starter through the control terminals A1/A2 located in the power base. This product is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and it complies with Green Premium standards (RoHS/REACh).

The TeSys T is a comprehensive motor management system designed to enhance productivity and predictive maintenance. It supports multiple communication protocols including Modbus™, CANopen, DeviceNet™, Profibus™, Ethernet/IP, and Modbus/TCP. The system comprises several components such as the LTMR controller, expansion module, HMI, software, and various accessories.The LTMR controller is the primary component responsible for managing basic functions like measuring ground current, motor temperature, and three-phase current of the motor. It also includes logic inputs and outputs for fault management. The expansion module, connected directly to the controller, provides additional inputs and measures voltage between phases, enabling the controller to monitor additional functions.The TeSys T system is highly reliable with a long product life due to its state-of-the-art component selection, all-in-one design, and advanced electronic protection. It can be integrated into various harsh environments such as dusty atmospheres, marine applications, high vibration applications, and corrosive atmospheres.This motor management system is suitable for industries like Metal/Mining/Mineral, Oil & Gas, Water Wastewater. The LTMR controller measures a current range of 0.4-8A with a supply voltage of 100-240 Vac and uses Modbus as the communication protocol.The dimensions of this device are 61 mm (H) X 91 mm (W) X 122.5 mm (D) and it weighs 0.53 kg.

The TeSys Ultra Control Unit is an advanced solution designed to enhance the performance of power bases LUB120, LUB320, and LUB380. This control unit provides full protection for motors with a rated current of up to 5A (adjustable), overload tripping class 10, short circuit at 13 times the maximum current, and overcurrent at 14.2 times the rated current. It also offers phase loss and insulation fault protection, ensuring the safety of your equipment. The TeSys Ultra Control Unit comes equipped with a thermal overload alarm that can be used locally via a LUFDA module or remotely via a LULC module. Additionally, it features a test push button for simulating overload conditions. This control unit is designed to work with a 24V DC voltage for the control of the starter. The TeSys Ultra Control Unit is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and it complies with Green Premium standards (RoHS/REACh).

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 32A. This Altistart 01 can be used for a motor rated power up to 7.5kW or 10hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Starter silnikowy SIRIUS M200D AS-i, Komunikacja: AS-Interface DOL starter Standard Elektroniczne przełączanie AC-3, 5,5 kW / 400 V 1,5 A...12,00 A, Elektroniczna ochrona przed przeciążeniem, Termistor: THERMOCLICK / PTC z hamulcem, 400 V AC 4 DI / 1 DO, AS-i Han Q4/2 - Han Q8/0 z ręczną obsługą lokalną i kluczowym przełącznikiem

The TeSys Ultra control and diagnostic unit is designed to be inserted into advanced power bases such as LUB120, LUB320, and LUB380 to form a TeSys U starter controller. This unit is ideal for 3-phase motor applications with a rated current of 1.25-5A (Ir adjustable) and up to [email protected] offers comprehensive protection features including overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, and insulation fault (protection of equipment only). The unit also provides a thermal overload alarm that can be used locally with a LUFDA module or remotely with a LULC module.Additionally, the TeSys Ultra control unit includes a test push button for overload simulation. It operates on a 110-240V AC / 110-220V DC voltage and is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and parallel key shaft end with holding brake. It is an equipped with an absolute multi-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. It is a servo motor with a rated supply voltage of 115V to 480V, a continuous stall current of 3.5A and a continuous power of 1190W. The shaft dimensions are 19mm (diameter) x 40mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 and IP65 rated product. The length of this product is 199.5mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 4.8kg. This range is compatible with PacDrive 3 for motion centric machines. It supports 100mm international standard flange mount with a natural convection cooling system. Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.

TeSys H ultra compact reverse starter, 3 poles, 2.4A/500V AC-53, for control and protection of 3-phase motors up to 0.75kW@400V (1HP@480V). The hybrid technology used for power contacts procures ultra compactness (22.5mm width) as well as an extended electrical durability up to 30 million cycles AC-53. It provides control for 2 directions of rotation, an adjustable motor current 0.18-2.4A, class 10A thermal overload protection with auto/manual/remote reset, phase loss and phase unbalanced protection, stall and jam motor protection. To be supplied with 24V DC, it provides logic inputs for FW/RV motor direction and remote reset after thermal tripping, 1C/O contact relay for fault indication, LED status on front face for indication of tripping and motor running. DIN rail mounting, screw terminals for control and power, it can be used without derating for ambient temperatures from -25 to 70°C. Multi standards certified (IEC, UL, CCC), Green Premium compliant (RoHS/REACh).

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 320A, a rated power from 100HP to300HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and parallel key shaft end with holding brake. It is an equipped with an absolute multi-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. It is a servo motor with a rated supply voltage of 115V to 480V, a continuous stall current of 6.6A and a continuous power of 2400W. The shaft dimensions are 19mm (diameter) x 40mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 and IP65 rated product. The length of this product is 271.5mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 8kg. This range is compatible with PacDrive 3 for motion centric machines. It supports 100mm international standard flange mount with a natural convection cooling system. Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.

The PSR6-600-70 is a space-saving softstarter designed for reliable motor control in standard industrial applications. With a maximum operational current of 6 A and a wide supply voltage range from 208 to 600 V AC, it supports a rated control voltage between 100 and 240 V AC at 50/60 Hz.Utilizing two-phase control, the PSR6-600-70 provides smooth motor starting and stopping via an adjustable voltage ramp. The integrated bypass contactor reduces heat dissipation and wiring complexity, contributing to efficient energy usage and simplified installation.The unit features a relay output that offers a RUN signal in a normally open (NO) state. Users can easily configure the start and stop ramp times using three front-facing potentiometers.Designed to pair seamlessly with ABB manual motor starters (MMS), the PSR softstarter also supports Fieldbus integration through an optional external adapter and plug.The PSR series represents ABB’s most compact line of softstarters, offering essential functionality for small motors ranging from 3 to 105 A. These softstarters handle up to 100 starts per hour, making them ideal for frequent-start applications such as pumps, fans, compressors, and conveyor systems.

This product is part of the PacDrive 3 range, an offer of integrated servo motors for machines from 0.31kW to 1.91kW. The 6-pole integrated servo motor features 3 stacks with a maximum mechanical speed of 6000RPM, a continuous rated stall torque 2.2Nm and smooth shaft. It is an equipped with a multi-turn SinCos Hiperface® absolute encoder (128 periods per revolution) with holding brake. It is an integrated servo motor with a supply voltage of 250V to 700V, a continuous stall current of 3A and a maximum continuous power of 0.72kW. The shaft dimensions are 14mm (diameter) x 30mm (length). It is an IP54 rated product. The length of this product is 293mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 4.7kg. It is suitable for use in general machine control, packaging machine automation, material handling applications. It supports international standard 70mm flange mount with a natural convection cooling system. Lexium 62 ILM integrated servo modules can be controlled with all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. Multiaxis integrated servo drives from 0.31kW to 1.91kW for automation solutions based on PacDrive 3.