Części zamienne Schneider Automation – Niezawodne rozwiązania dla automatyki przemysłowej

The Multi9 C60BPR is a low voltage miniature circuit breaker (MCB) designed with a single protected pole and a rated current of 1A. It features a C tripping curve and a rated short circuit breaking capacity of up to 3kA at 415VAC, compliant with EN/IEC 60947-2 standards. This device adheres to both industrial and residential standards, providing essential protection against short circuits, earth leakage, and overloads.Intended for use by original equipment manufacturers (OEM) and control panel builders, the MCB offers an electrical endurance of up to 10,000 cycles and a mechanical endurance of 20,000 cycles. The operational voltage reaches up to 240VAC, while the rated insulation voltage is 500VAC, ensuring reliable performance in various environments. The rated impulse withstand voltage is 6kV, and the product can be mounted on a DIN rail, occupying a width of 2 pitches at 9mm each.Notably, the Multi9 C60BPR supports a pollution degree of 3 and operates effectively within a temperature range of -30°C to 70°C. Its dimensions are 18mm in width, 127mm in height, and 72mm in depth. With an IP20 degree of protection according to IEC/EN 60529, the circuit breaker is designed to safeguard its terminals against dust and moisture.

The XPS-CM safety module is designed for the monitoring of single-beam photo-electric sensors, equipped with a built-in muting function. This module adheres to safety requirements, achieving performance level (PL) c according to EN/ISO 13849-1, and SILCL 1 compliance per EN/IEC 61508 and EN/IEC 62061. When integrated with XU2S single-beam photo-electric sensors that undergo periodic testing, it forms a category 2 light curtain that conforms to IEC/EN 61496 parts 1 and 2.Operating within an ambient temperature range of -10 to 55 °C, this module has an IP20 degree of protection for terminals and IP40 for the enclosure. It requires a power supply of 24 V DC and has a power consumption of 15 W. The module supports a maximum output current of 5.6 A per relay, with a thermal current limit of 11 A.Key features include a muting maximum duration of 60 seconds and synchronization time between inputs of 3 seconds. The rated insulation voltage is 300 V, and the module also includes local signaling with multiple LEDs indicating various statuses, such as internal fuse and safety outputs. It is important to note that this device is PVC-free and meets several environmental standards, including RoHS compliance.

This single-phase modular relay, part of the Harmony Solid State relay range, features zero voltage switching, making it optimal for applications involving resistive loads. It operates with an input voltage of 18 to 36V AC and supports output voltages ranging from 24 to 280V AC. The absence of moving parts contributes to its silent operation and enhances its reliability, resulting in an extended operational lifespan.With dimensions of 11mm in width, 90.3mm in height, and 83.7mm in depth, this relay weighs only 0.05 kg. It is designed for symmetrical DIN rail mounting and includes screw terminal connections for straightforward installation, accommodating wire sizes from AWG 22 to AWG 14 for input and output connections. The relay also features a green LED indicator for input status and a schematic for simplified wiring and maintenance.Conforming to several standards including IEC 61000, IEC 60950-1, and IEC 62314, the relay is certified for safety and environmental compliance, including CE, UL, CSA, ROHS, and REACH. The built-in heatsink enhances performance while reducing the need for additional spare parts. This device is suitable for various applications such as industrial machinery, HVAC systems, automation control panels, and medical equipment.

The TeSys Vario enclosed switch disconnector is designed for emergency stop applications in motor systems, supporting up to 50HP at 600V. This model, rated at 100A, conforms to both UL and CSA standards, ensuring reliable performance in various environments.With an IP65 rating and compliant with NEMA type 12 specifications, it is suitable for use in harsh conditions, providing excellent protection against dust and water ingress. The device features a red and yellow operator for clear visibility and can be operated via a long handle that is padlockable, enhancing safety during maintenance.This switch disconnector supports direct connections through screw clamp terminals, accommodating both solid and flexible cables. Its robust design ensures mechanical durability, rated for 30,000 cycles, and it can withstand vibrations and shocks according to IEC standards. The included V5 Vario switch disconnector meets multiple international certifications, including IEC 60947-4-1 and IEC 60204.Furthermore, the environmental compliance of this product is notable, being Green Premium certified and free of toxic heavy metals. The operational temperature range is specified from -20°C to 50°C, making it versatile for various industrial applications.

This preassembled cordset is part of the Modicon X80 modules. It is compatible with 32 channels modules. It enables the connection between the I/O of modules with 40-way connectors and the sensors, preactuators.

The power module for the TeSys island system is designed to operate with three poles and supports a rated operational current of 9A at 690V. This module, when connected to a TPRBC bus coupler, is capable of protecting and monitoring loads up to 9A and motors rated at 4kW at 400V or 5hp at 480V. Its functionalities include thermal overload protection, phase loss detection, and monitoring of load conditions such as maximum and average voltages and currents when paired with a TPRVM001 voltage module. In terms of specifications, it features a maximum insulation voltage of 690V according to IEC standards and a rated impulse withstand voltage of 6kV. The thermal overload protection is adjustable within the range of 0.18 to 9A, classified under thermal overload class 5-30. The device also incorporates remote or automatic reset capabilities and is operational only when connected to a bus coupler. The module is compliant with various international standards including IEC, UL, and CSA and adheres to the Green Premium program, emphasizing its environmental considerations. It can be mounted on a DIN rail in either horizontal or vertical orientation and has a compact design with dimensions of 121mm in height, 45mm in width, and 115mm in depth. The product meets electromagnetic compatibility requirements and can withstand operational temperatures ranging from -10°C to 50°C without derating.

The Schneider Electric TeSys Ultra additional function module is designed for insertion into advanced power bases LUB120, LUB320, and LUB380. This module enables motor load monitoring by providing a 4-20mA output signal and an image of the load ratio. It requires connection to a load impedance of 100 Ohm typical (500 Ohm max) for optimal performance. The TeSys Ultra Function Module measures phase currents and computes the ratio I average/Ir within the range of 0 to 2 for LUCB and LUCD control units, and of 0 to 3 for LUCC control units. It operates with an external power supply of 24V DC and is to be inserted in the cavity of a power base provided for auxiliary modules. This module is certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), and is Green Premium compliant (RoHS/REACh).

The Schneider Electric Altivar Machine ATV320 is a versatile variable speed drive designed for a wide range of applications. Its compact form factor allows vertical stacking inside machine frames, making it an ideal choice for Original Equipment Manufacturers (OEMs) with simple and advanced application requirements. This drive can feed 3-phase synchronous and asynchronous motors, offering a rated power of up to 4kW and a voltage range from 380V to 500V AC.The Altivar Machine ATV320 is robustly designed with IEC 60721-3-3 class 3C3 coated printed circuit boards, allowing it to operate in harsh environmental conditions. It incorporates functions suitable for common applications, including high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors.The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions can be configured using SoMove software. The Altivar Machine ATV320 conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), and is CE, UL, CSA, NOM, EAC and RCM certified.Mounting accessories and external options such as braking resistors, line chokes, motor chokes, and additional EMC filters are available with Altivar Machine ATV320 drives. The drive is designed to be mounted in a vertical position on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM, allowing for configuration, control, and diagnosis directly in SoMachine and SoMove software by means of the same software brick (DTM). The Altivar Machine ATV320 is eco-friendly and complies with directives such as RoHS, WEEE, etc. relating to environmental protection.

The Schneider Electric TeSys Deca Manual Starter and Protector is a versatile solution that combines manual isolation, motor control, and thermal overcurrent protection in one compact unit. This device is designed to handle motors with full load currents up to 65 amperes, making it an ideal choice for various industrial applications. Key Features: Manual Starter: The manual starter provides three-pole control and is operated by a rotary handle. It's suitable for horsepower ratings up to 65 amperes. Thermal Overcurrent Protection: This device features an ambient compensated thermal overcurrent protection that can be adjusted from 30 amperes to 40 amperes, providing a high level of safety and reliability. EVERLINK Terminals: The manual starter comes with EVERLINK terminals for easy and secure connection. Certifications: Multi-standard certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX) Green Premium compliant (RoHS/REACh)

The Multi9 C60BPR is a 2-pole miniature circuit breaker (MCB) with a rated current of 45A and a C tripping curve. It provides a short circuit breaking capacity of up to 10kA at 415VAC, adhering to the EN/IEC 60947-2 standard. This unit complies with both industrial and residential standards, including EN/IEC 60898-1 and EN/IEC 60947-2, ensuring reliable protection against electrical threats such as short circuits, overloads, and earth leakage.Designed to accommodate original equipment manufacturers (OEM) and control panel builders, this MCB features an electrical endurance of 10,000 cycles and a mechanical endurance of 20,000 cycles. It operates at a voltage of 240VAC and has a rated insulation voltage of 500VAC. The rated impulse withstand voltage is 6kV, making it suitable for various applications.With a compact design, the dimensions of the device are 36mm in width, 127mm in height, and 72mm in depth. It is mountable on a DIN rail, and its terminals offer an IP20 degree of protection according to IEC/EN 60529. The operational temperature range extends from -30°C to 70°C, with a storage temperature range of -40°C to 80°C.

This Multi9 C60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 50A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. Its fast closing mechanism, overvolatge resistance and high performance limitation improve its service life. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 81mm x (D) 72mm. The weight is 0.36kg. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

TeSys D contactor, 3 poles (3NO), for switching 3-phase capacitor banks up to 25kVAR@400V 50Hz (42kVAR@690V). It provides a 240V 50/60Hz AC coil, 1NO+2NC instantaneous auxiliary contacts, with front mounted early make poles and pre-wired damping resistors for current limitation. For operating rates until 240 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Certified IEC 60947 and compliant with shunt capacitors standard IEC 60831, Green Premium product (RoHS/REACh).

The RXM series miniature relays are designed for use with RXZE sockets, featuring a 4 changeover contact (C/O) configuration and a current rating of 6A. Operating at a control circuit voltage of 24V AC at 50/60 Hz, these relays provide reliable functionality in various applications, including industrial machines, HVAC systems, and automation control panels.Equipped with a lockable test button, the relay allows for easy status checks. The button is activated by a momentary press of the red pushbutton, while the locking mechanism is engaged by flipping up the green component. Additionally, a mechanical indicator provides visual feedback on the contact status through an orange flag, complemented by a green LED that illuminates when the relay is active, ensuring clear visibility in diverse lighting conditions.This relay adheres to international standards and certifications such as IEC, CE, UL, CSA, EAC, Lloyd's, RoHS, and REACH, making it suitable for compliance in various regions. It is constructed to endure environmental stresses, with an operating temperature range of -40 to 55 °C and robust dielectric strength ratings, ensuring durability under operational conditions. The RXM relay can be utilized in both simple and complex automation systems, with features such as a maximum switching capacity of 1500 VA/168 W and an electrical durability of 100,000 cycles for resistive loads.The device is categorized as a green premium product, demonstrating a commitment to sustainability and compliance with environmental regulations.

The BMP synchronous motor is designed for integration with variable speed drives, specifically the Altivar 32 range. It operates at a rated voltage of 480V with a nominal output power of 0.95 kW, achieving a maximum mechanical speed of 3600 rpm. This motor features a keyed shaft end and a rotatable right-angled connector, facilitating various installation configurations. The shaft has a diameter of 19 mm and a length of 40 mm, with a flange size of 100 mm, accommodating mounting positions in accordance with IEC 60034-7. With an IP65 standard protection rating, and an optional IP67 rating with a kit, this motor is suitable for demanding environments. It weighs 3.34 kg and is classified as having a medium moment of inertia, which is beneficial for applications requiring responsive torque. The BMP motor is compatible with multiple variable speed drives, including the ATV32 and ATV320 series, providing versatility for hoisting, material handling, and textile machines. The motor's energy efficiency and high power density contribute to its optimal performance in various industrial applications.

TeSys U multifunction control unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 0.09kW@400V and 3-phase up to 0.25kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload class selectable 5-30, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). Equipped with a LCD display and a 4-button keyboard for the setting of protection and alarm parameters, and display of electrical values and events. RS485 Modbus communication RJ45 port available for remote control and integration with SoMove/MachineExpert. To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base), it must be supplied with an external 24V DC power supply. Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The toggle switch head features a blue lever and is designed for use in various applications, facilitating control through its dual position functionality. It is suitable for installation on compatible selector switch units, providing a reliable interface for machine operation. With a mounting diameter of 22 mm and an overall size of 29 mm in width and height, this component is compact yet effective. It offers a mechanical durability of up to 500,000 cycles, ensuring long-term use even in demanding environments. Protected by an IP66 rating, the switch head is resistant to dust and water, while its IK06 rating indicates a certain level of impact resistance. It can function optimally in temperatures ranging from -40°C to 70°C, making it suitable for various industrial settings. Compliance with multiple standards, including UL and IEC, ensures its reliability and safety in operation. The product is designated as XALD 1...5 cut-outs, and it is suitable for various electrical compositions.

TeSys F DC coil 220/240V (voltage code MW), low sealed consumption, for TeSys F 3-pole and 4-pole contactors LC1F800. It can be supplied in 220-240V AC 40-400Hz using a rectifier DR5TE4U (to be ordered separately). It operates in the voltage limits 0.85-1.1 Uc and environments until 55°C. It provides to the contactor high operating rates until 600 cycles/hour. Green Premium compliant (RoHS/REACh).

The Multi9 C60SP serves as a low voltage miniature circuit breaker (MCB) designed for effective electrical protection. This model is configured with four protected poles and has a rated current of 16A with a C tripping curve. It offers a rated short circuit breaking capacity of 10kA at 415VAC, complying with the EN/IEC 60947-2 standard. This circuit breaker is suitable for both industrial and residential applications, conforming to the EN/IEC 60898-1 standard. It effectively safeguards against short circuits, overloads, and earth leakage, making it a crucial component for original equipment manufacturers (OEM) and control panel builders. Its electrical endurance is rated for up to 10,000 cycles, while mechanical endurance reaches 20,000 cycles. The operational voltage is specified at 240VAC, with a rated insulation voltage of 500VAC and a rated impulse withstand voltage of 6kV. The device can be easily mounted on a DIN rail, with a compact width of 72mm, height of 81mm, and depth of 72mm. It is designed for operation within a temperature range of -30°C to 70°C and can be stored at temperatures between -40°C and 80°C. The product also features an IP20 protection degree on its terminals, as per IEC/EN 60529, thereby ensuring adequate safety against environmental factors.

TeSys K control relay, 4 contacts (2NO+2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a low consumption 24V DC control circuit with no inrush consumption and equipped with a surge suppression device, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

The GV2 manual starter and protector provides manual isolation, manual motor control, and thermal overcurrent protection in one compact unit. The basic motor starter GV2P controls motors with full load currents up to 32 A. The manual starter is three pole with horsepower ratings. The manual starter is operated by a rotary handle. The Class 10 ambient compensated thermal over current is adjustable from 20 ampere to 25 ampere. This device has screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).