ABLS1A48025

Complementary

Output Coupling

parallel

Height

123.6 mm

Residual Ripple

< 150 mV

Status Led

1 LED (Green) output voltage

Holding Time

> 20 ms 115 V AC || > 40 ms 230 V AC

Efficiency At Full Load

85...264 V AC without temperature derating || 120...375 V DC without temperature derating || 85…120 V DC with temperature derating

Earthing System

TN || TT || IT

Connections - Terminals

screw connection 0.5...4 mm², AWG 20...AWG 12) without wire end ferrule output || screw connection 0.5...2.5 mm², AWG 20...AWG 14) with wire end ferrule output || screw connection 0.75...4 mm², AWG 18...AWG 12) without wire end ferrule input || screw connection 0.75...4 mm², AWG 18...AWG 12) with wire end ferrule input

Dielectric Strength

3000 V AC with input to output

Network Frequency Limits

50-60 Hz

Current Consumption

< 2.5 A 115 V AC || < 1.4 A 230 V AC || < 1.3 A 140 V DC

Supply

SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41

Net Weight

0.55 kg

Maximum Leakage Current

1 mA 240 V AC

Input Protection Type

integrated fuse (not interchangeable) 4 A || external protection (recommended) 20 A Curve C || external protection (recommended) 13 A Curve C

Output Protection Type

against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset

Service Life

10 year(s)

Meantime Between Failure [Mtbf]

700000 h at 25 °C, full load conforming to SR 332

Power Dissipation In W

23 W

Output Voltage Limits

44...56 V

Mounting Support

top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail

Load Capacitance

4000 µF

Response Time

< 1 s

Line And Load Regulation

< 0.5 % network 0 to 100 % load at 25 °C || < 1 % network full voltage range in line at 25 °C

Width

40 mm

Overvoltage Category

II

Inrush Current

30.0 A 115 V || 60.0 A 230 V

Efficiency

85 % 115 V AC || 88 % 230 V AC

Depth

117.6 mm

Power Factor

0.55 at 115 V AC || 0.45 at 230 V AC

Specifications

Range Of Product

Modicon Power Supply

Output Voltage

48 V DC

Product Or Component Type

power supply

Power Supply Type

regulated switch mode

Input Voltage

100...240 V AC single phase || 100...240 V AC phase to phase || 140...340 V DC

Power Supply Output Current

2.5 A

Kw Rating

120 W

Enclosure Material

Aluminum

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP2007005EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Circularity Profile

ENVEOLI2007005EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Environment

Standards

IEC 62368-1 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || CSA C22.2 No 62368-1 || UL 508 || CSA C22.2 No. 107.1 || EN/IEC 62368-1

Ambient Air Temperature For Operation

-20--10 °C with current derating of 2 % per °C mounting position A < 6561.68 ft (2000 m) || -10-40 °C without derating mounting position A 115 V AC < 6561.68 ft (2000 m) || -10-50 °C without derating mounting position A 230 V AC < 6561.68 ft (2000 m) || 40-70 °C with current derating of 1.67 % per °C mounting position A 115 V AC < 6561.68 ft (2000 m) || 50-70 °C with current derating of 2.5 % per °C mounting position A 230 V AC < 6561.68 ft (2000 m)

Product Certifications

CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC

Pollution Degree

2

Electromagnetic Compatibility

immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || immunity to conducted RF disturbances - test level: 15 V/m (80 MHz...2 GHz) conforming to IEC 61000-4-3 || immunity to conducted RF disturbances - test level: 5 V/m (2...2.7 GHz) conforming to IEC 61000-4-3 || immunity to conducted RF disturbances - test level: 5 V/m (2.7...6 GHz) conforming to IEC 61000-4-3 || immunity to fast transients - test level: 4 kV (on input-output) conforming to IEC 61000-4-4 || surge immunity test - test level: 4 kV (between power supply and earth) conforming to IEC 61000-4-5 || surge immunity test - test level: 3 kV (between phases) conforming to IEC 61000-4-5 || immunity to conducted RF disturbances - test level: 15 V (0.15...80 MHz) conforming to IEC 61000-4-6 || immunity to magnetic fields - test level: 30 A/m (50...60 Hz) conforming to IEC 61000-4-8 || immunity to voltage dips conforming to IEC 61000-4-11 || disturbing field emission conforming to EN 55016-2-3 || limits for harmonic current emissions conforming to IEC 61000-3-2 || conforming to EN 55016-1-2 || conforming to EN 55016-2-1

Shock Resistance

150 m/s² 11 ms

Vibration Resistance

3 mm 2-9 Hz)IEC 60068-2-6 || 10 m/s² 9-200 Hz)IEC 60068-2-6

Ip Degree Of Protection

IP20

Operating Altitude

< 5000 m

Electrical Shock Protection Class

class I

Electromagnetic Emission

conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4

Modele CAD

traceparts

Pobierz