Schneider Electric

ATV320D11N4B

1 / 3
thumbnail
thumbnail
thumbnail

Description

Active Mature
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
Country of Origin
ID
Part Number
ATV320D11N4B
Tariff Code
85044095
EAN
3606480931314
UNSPSC
39122001
€701.10
net
€779.00
Shipping from:
€25.00
1
Payment methods:
Best offer from:
CZTrusted Automa.Net Supplier
Availability:
3 pcs.
In-Stock
Updated at: 07-11-2024
Warranty:
24 months
Estimated Delivery:
11-12 November to United Kingdom
Condition:
New Factory Sealed
New Factory Sealed - A brand-new, unused, unopened, undamaged item in its original manufacturer-sealed packaging.
A total of 4 Parts In-Stock from 2 Distributors
Delivery from:
CZ
CZ
NL
NL
Shipping Information
Secure Payment Process
Return & Refund Policies
Shipping Policies
Warranty Policies

Available Offers (1)

ATV320D11N4B product image
Schneider Electric

ATV320D11N4B

Condition:
New Factory Sealed
Available:
1 pc.
In-Stock
Updated at: 07-11-2024
Offer from:
NLTrusted Automa.Net Supplier
Estimated Delivery:
11 November to United Kingdom
Warranty:
24 months
1
€832.00
€732.16
net
Free Shipping!

Complementary

Prospective Line Isc
22 kA
Network Frequency
50-60 Hz
Power Dissipation In W
fan 370 W 380 V 4 kHz
Line Current
36.6 A 380 V heavy duty) || 25.6 A 500 V heavy duty)
Analogue Output Type
software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Discrete Output Type
open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
Asynchronous Motor Control Profile
voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
Maximum Switching Current
relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2A, R2C resistive, cos phi = 1 5 A 250 V AC || relay output R2A, R2C resistive, cos phi = 1 5 A 30 V DC
4 Quadrant Operation Possible
true
Relative Symmetric Network Frequency Tolerance
5 %
Apparent Power
22.2 kVA 500 V heavy duty)
Net Weight
6.8 kg
Relay Output Type
configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
Switching Frequency
2...16 kHz adjustable || 4...16 kHz with derating factor
Analogue Input Number
3
Motor Slip Compensation
automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
Discrete Output Number
3
Method Of Access
slave CANopen
Discrete Input Number
7
With Safety Function Safe Stop 1 (Ss1)
true
Width
180 mm
Depth
232.0 mm
Analogue Input Type
AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Maximum Output Frequency
0.599 kHz
Height
404.0 mm
Acceleration And Deceleration Ramps
linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
Maximum Output Voltage
500 V
Base Load Current At High Overload
3.3 A
Transient Overtorque
170-200 % of nominal motor torque
With Safety Function Safe Torque Off (Sto)
true
Analogue Output Number
1
Minimum Switching Current
relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Discrete Input Logic
positive logic (source) || negative logic (sink)
Brake Chopper Integrated
true
Nominal Switching Frequency
4 kHz
Braking To Standstill
by DC injection
Discrete Input Type
STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
Protection Type
input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
With Safety Function Safely Limited Speed (Sls)
true
Synchronous Motor Control Profile
vector control without sensor

Offer Sustainability

Mercury Free
Yes
Reach Regulation
Reference contains Substances of Very High Concern above the threshold
Weee
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation
X
Upgradeability
Upgraded components available
Rohs Exemption Information
Yes
Environmental Disclosure
ENVPEP1709006EN
Sustainable Offer Status
Green Premium product
California Proposition 65
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile
ENVEOLI1709006EN_V1
Eu Rohs Directive
Pro-active compliance (Product out of EU RoHS legal scope)

Environment

Product Certifications
CE || ATEX || NOM || GOST || EAC || RCM || KC
Maximum Deflection Under Vibratory Load (During Operation)
1.5 mm at 2...13 Hz
Standards
IEC 61800-5-1
Regulation Loop
adjustable PID regulator
Permitted Relative Humidity (During Operation)
class 3K5 according to EN 60721-3
Overvoltage Category
III
Environmental Class (During Operation)
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Maximum Acceleration Under Shock Impact (During Operation)
150 m/s² at 11 ms
Pollution Degree
2
Electromagnetic Compatibility
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency immunity test level 3 IEC 61000-4-6 || voltage dips and interruptions immunity test IEC 61000-4-11
Ambient Air Temperature For Operation
-10-50 °C without derating || 50-60 °C with derating factor
Volume Of Cooling Air
156.0 m3/h
Marking
CE || ATEX || UL || CSA || EAC || RCM
Maximum Acceleration Under Vibrational Stress (During Operation)
10 m/s² at 13...200 Hz
Ambient Air Temperature For Storage
-25-70 °C
Operating Position
vertical +/- 10 degree
Ambient Air Transport Temperature
-25-70 °C
Speed Accuracy
+/- 10 % of nominal slip 0.2 Tn to Tn

Specifications

Variant
standard version
Format Of The Drive
book
Product Or Component Type
variable speed drive
Ip Degree Of Protection
IP20
Communication Port Protocol
Modbus serial || CANopen
Nominal Output Current
27.7 A
Product Specific Application
complex machines
Option Card
communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, DeviceNet
Range Of Product
Altivar Machine ATV320
Motor Power Kw
11 kW heavy duty
[Us] Rated Supply Voltage
380...500 V - 15...10 %
Mounting Mode
wall mount
Emc Filter
class C3 EMC filter integrated

CAD Models

traceparts
traceparts
Download