- Power Dissipation
- 0.4 W + (1 x input point on) + (0.75 total output load current)
- Discrete Output Type
- solid state, isolated
- Maximum Load Current
- <= 16 A per module || <= 4 A per point
- Isolation Between Group Of I/O Channels
- 1780 Vrms for 1 minute
- Discrete Output Logic
- source or sink
- Discrete Input Voltage
- 125 V DC
- Maximum Voltage Drop
- <0.75 V 4 A
- Isolation Between Group And Bus
- 2500 Vrms for 1 minute
- Discrete Output Number
- 4 1 group of 4
- Maximum Load Capacitance
- 0.1 µF 150 V DC || 0.6 µF 24 V DC
- Isolation Between Channels
- 1780 Vrms for 1 minute
- Current State 1 Guaranteed
- >= 2 mA
- Network Frequency Limits
- 47-63 Hz
- Marking
- CE
- Current State 0 Guaranteed
- <= 1.2 mA
- Response Time
- 0.5 or 1.5 ms depending on the filter at state 0 to state 1 || 0.5 or 1.5 ms depending on the filter at state 1 to state 0
- Input Voltage Limits
- 156.2 V including ripple
- Associated Fuse Rating
- 5 A
- Net Weight
- 0.3 kg
- Voltage State 0 Guaranteed
- 0...36 V
- Output Voltage Limits
- 19.2...156.2 V DC typical
- Maximum Leakage Current
- 1.2 mA 150 V DC
- Voltage State 1 Guaranteed
- 88...156.2 V
- Discrete Output Voltage
- 24...125 V
- Absolute Maximum Output
- 30 A during 500 ms per point
- Discrete Input Logic
- sink
- Bus Current Requirement
- 350 mA
- Addressing Requirement
- 1 input word || 1 output word
- Fault Indication
- overcurrent on output
- Local Signalling
- for bus communication is present (Active) 1 LED (green) || for no voltage in output and input (F) 1 LED (red) || for fault detected on the output point 2 LEDs (red) || for output is turned on 4 LEDs (green) || for fault detected on the input point 4 LEDs (red)
- Protection Type
- internal output protection by 5 A fuse per group || on output by transient voltage suppression || on input by resistor limited
- Discrete Input Number
- 4 1 group of 8