- Repeat Accuracy
- 2 %
- Pressure Actuator
- diaphragm
- Height
- 96 mm
- Terminal Block Type
- 4 terminals
- Terminals Description Iso N°1
- (3-4)NC || (1-2)NC
- Possible Differential Minimum At Low Setting
- 1 bar
- Possible Differential Minimum At Middle Setting
- 1.1 bar
- Possible Differential Maximum At Low Setting
- 2.1 bar
- Maximum Operating Rate
- 10 cyc/mn
- Adjustable Range Of Switching Point On Falling Pressure
- 0.3-3.4 bar
- Materials In Contact With Fluid
- nitrile || nylon 6/6 || zinc plated steel
- Motor Power Kw
- 0.75 kW/1 hp at 110 V AC, 1 phase || 1.1 kW/1.5 hp at 110 V AC, 3 phase || 1.5 kW/2 hp at 230 V AC, 1 phase || 1.5 kW/2 hp at 400 V AC, 1 phase || 2.2 kW/3 hp at 230 V AC, 3 phase || 2.2 kW/3 hp at 400 V AC, 3 phase
- Net Weight
- 0.34 kg
- [Uimp] Rated Impulse Withstand Voltage
- 6 kV EN/IEC 60947-1
- Electrical Durability
- 100000 cycles 10 cyc/mn
- Maximum Permissible Pressure - Per Cycle
- 5.75 bar
- [Ui] Rated Insulation Voltage
- 500 V EN/IEC 60947-1
- Possible Differential Maximum At Middle Setting
- 2.2 bar
- Mechanical Durability
- 1000000 cycles
- Operating Position
- any position
- Enclosure Material
- PS
- Adjustable Range Of Switching Point On Rising Pressure
- 1.4-4.6 bar
- Possible Differential Minimum At High Setting
- 1.2 bar
- Width
- 72 mm
- Maximum Permissible Accidental Pressure
- 8 bar
- Depth
- 102 mm
- Possible Differential Maximum At High Setting
- 2.3 bar
- Destruction Pressure
- 20 bar