RM35S0MW

Environment

Product Certifications

C-tick || GOST || UL || GL || CSA

Ambient Air Temperature For Operation

-20-50 °C

Standards

NF EN 60255-6 || IEC 60255-6

Immunity To Microbreaks

50 ms

Dielectric Test Voltage

2 kV AC 50 Hz

Electromagnetic Compatibility

emission standard for industrial environments IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments IEC 61000-6-3 || immunity for industrial environments NF EN/IEC 61000-6-2

Shock Resistance

15 gn 11 ms IEC 60255-21-1

Vibration Resistance

0.35 mm 5-57.6 Hz)IEC 60068-2-6/IEC 60255-21-1 || 1 gn 57.6-150 Hz)IEC 60068-2-6/IEC 60255-21-1

Ip Degree Of Protection

IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)

Pollution Degree

3 IEC 60664-1

Ambient Air Temperature For Storage

-40-70 °C

Relative Humidity

95-95 % 55-55 °C IEC 60068-2-30

Non-Dissipating Shock Wave

4 kV

Contractual warranty

Warranty

18 months

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1504008EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Circularity Profile

ENVEOLI1504008EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Maximum Supply Current For Sensors

40 mA < 24 V AC 25 °C || 40 mA < 24 V DC 25 °C || 50 mA 24...240 V AC || 50 mA 24...240 V DC

Hysteresis

5-5 % threshold

Insulation Resistance

> 500 MOhm 500 V DC between supply and relay output IEC 60255-5 || > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 || > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 || > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 || > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 || > 1 MOhm 500 V DC between supply and measurement IEC 60664-1

Measurement Error

+/- 0.1 %/°C with temperature variation || < +/- 1 % over the whole range with voltage variation

Operating Rate

<= 360 operations/hour full load

Status Led

1 LED Green power ON || 1 LED Yellow inhibit || 1 LED Yellow relay (R)

Output Contacts

1 C/O

Contacts Material

cadmium free

Polarity

reversible polarity on DC supply

Marking

CE : EMC 89/336/EEC || CE : 73/23/EEC

Response Time

15 ms max (on crossing the threshold)

Operating Position

any position without derating

Input Frequency

0.0017-20 Hz

Threshold Setting

10...100 %

Maximum Switching Voltage

250 V AC/DC

Reset Time

50 ms contact S2 in memory mode on time delay || 1 s supply Un in memory mode on time delay

[Us] Rated Supply Voltage

11.5...12.5 V

Input Compatibility

3-wire sensor (E1) PNP or NPN, 12 V, 50 mA || NAMUR sensor (E2), 12 V, 1.5 kOhm || voltage input (E1), 0...30 V, 9.5 kOhm >= 4.5 V <= 1 V || volt-free contact input (E1), 12 V, 9.5 kOhm

Connections - Terminals

screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end

[Ui] Rated Insulation Voltage

250 V IEC 60664-1

Overvoltage Category

III IEC 60664-1

Supply Voltage Limits

20.4-264 V AC/DC

Mounting Support

35 mm symmetrical DIN rail conforming to IEC 60715

Nominal Output Current

5 A

Mechanical Durability

30000000 cycles

Housing Material

self-extinguishing plastic

Control Circuit Voltage Limits

15 % + 10 % Un

Impulse Duration

>= 5 ms high state || >= 5 ms low state

Measurement Accuracy

+/- 10 % of the full scale value

Width

35 mm

Tightening Torque

0.6-1 N.m IEC 60947-1

Maximum Power Consumption In W

3 W DC

Electrical Durability

100000 cycles

Run-Up Delay At Power-Up

0.05 s

Repeat Accuracy

+/- 0.5 % input and measurement circuit || +/- 0.5 % time delay

Supply Frequency

50/60 Hz +/- 10 %

Specifications

Minimum Switching Current

10 mA 5 V DC

Range Of Product

Harmony Control Relays

[Us] Rated Supply Voltage

24...240 V AC/DC

Measurement Range

0.05...0.5 s || 0.5...5 min || 1...10 min || 1...10 s || 0.5...5 s || 0.1...1 s || 0.1...1 min

Switching Capacity In Va

1250 VA

Product Or Component Type

speed control relay

Utilisation Category

AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || DC-14 IEC 60947-5-1

Relay Name

RM35S

Time Delay Range

0.6...60 s adjustable on energisation 0...10 % of the full scale value)

Relay Type

speed control relays

Relay Monitored Parameters

overspeed || underspeed

Maximum Power Consumption In Va

5 VA AC

CAD Models

traceparts

Download