Product Search

The CT-ARE is a single-function electronic time relay from the CT-E timer range. It provides an OFF-delay (true delay on break) function without auxiliary voltage and with a time range from 0.1 s to 10 s. This time relay operates with a rated control supply voltage of 110 - 130 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A.

SINAMICS G120 POWER MODULE PM230 WITH BUILT IN CL. A FILTER PROTECTION IP20 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 30KW FOR 110% 60S,100% 240S AMBIENT TEMP 0 TO +40 DEG C(LO) 419 X 275 X 204 (HXWXD), FSD WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU240B/E-2 AND CU230P-2 FIRMWARE-VERSION V4.4 NOTE: PM230 DOES NOT SUPPORT SAFETY

The System pro M compact S200 miniature circuit breakers are designed to provide current limiting protection. They incorporate two distinct tripping mechanisms: the delayed thermal mechanism for overload protection and the electromechanical mechanism for short-circuit protection. These circuit breakers are available in various characteristics (B, C, D, K, Z), configurations (1P, 1P+N, 2P, 3P, 3P+N, 4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs in the S200 range comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 standards, enabling their use across residential, commercial, and industrial applications. The bottom-fitting auxiliary contact on these MCBs allows for significant space savings.

The Siemens SCALANCE W1750D-2IA RJ45 Direct Access Point is a robust, dual-radio WLAN device designed for efficient and reliable network connectivity. It operates without the need for a Wireless Local Controller (WLC), making it an ideal choice for environments where such infrastructure may not be available or practical.This access point features internal antennas, providing optimal signal coverage and reducing the need for external antenna systems. It supports IEEE802.11ac wave2 AP with MU-MIMO technology, enabling high-speed data transmission rates of up to 800 Mbit/s on the 2.4 GHz band and up to 1.7 Gbit/s on the 5 GHz band.The SCALANCE W1750D-2IA RJ45 Direct Access Point is equipped with two RJ45 ports, PoE (Power over Ethernet), and a USB port for additional connectivity options. It is designed to operate in a temperature range of 0°C to +50°C, ensuring reliable performance even in challenging environmental conditions.Please note that this product requires national approvals. The Cert ID includes MPCIE, and the scope of supply includes a DVD and a Quick Start Guide (en) manual. It is designed for ceiling mounting and is suitable for RoW applications.

The SIMATIC IPC347E is a robust 19" rack PC designed for industrial applications. It boasts a compact form factor of 4U height, making it ideal for space-constrained environments. At its heart lies the powerful Core I5-4570S processor, offering 4 cores/4 threads and a base clock speed of 2.9 GHz (boosted to 3.6 GHz), complemented by a 6 MB cache for enhanced performance. Connectivity options are abundant with this device, featuring two Gigabit Ethernet ports, one DVI-D and VGA output, as well as multiple USB interfaces on both the front and rear panels. Additionally, it supports audio, serial, PS/2, and internal USB connections. Storage capacity is provided by a single 500 GB hard drive, while memory is handled by 4 GB DDR3 SD-RAM operating in a single channel configuration. The device also includes a DVD +/-RW optical drive for data storage and retrieval. Preinstalled with Windows10 Enterprise LTSB 2016, the SIMATIC IPC347E is equipped with a 100/240 V industrial power supply, excluding the line cable. This ensures reliable operation in demanding industrial environments.

The SINAMICS G110D AC Drive is a robust and efficient solution designed for industrial automation applications. It comes equipped with a repair switch, an integrated Class A filter, and a braking chopper to ensure optimal performance and safety. The drive features an AS-Interface bus interface, making it compatible with a wide range of 380-500V at 47-63Hz power sources. It offers high overload capabilities, with a maximum capacity of 1.5kW at 200% for 3 seconds, 150% for 60 seconds, and 100% for 300 seconds. The drive is designed to operate in ambient temperatures ranging from -10°C to +40°C. With dimensions of 210 x 450 x 145 (HxWxD), it offers a compact and space-saving design without compromising on performance or safety.The drive is protected by an IP65 rating, ensuring it can withstand harsh industrial environments. It does not include an operator panel, making it suitable for applications where a control interface is not required. The SINAMICS G110D AC Drive is a reliable and versatile solution for a wide range of industrial automation needs.

AF26 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult your ABB representative.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 240 VAC 50 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 4.92 inches deep. It weighs 3.88 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

22 and 24 AWG stranded tinned copper conductors, PVC insulation (power), FPE insulation (Data), individually foil shielded (100% coverage) and an overall tinned copper braid (65% coverage), sunlight/oil-resistant PVC jacket.

The Prosoft Modbus TCP/IP Communication Module is a single-slot solution designed to facilitate seamless interaction between Rockwell Automation's CompactLogix processors and a wide range of Modbus TCP/IP network applications. This module, identified by the MVI69-MNET model code, acts as an input/output bridge, enabling data exchange between the processor and the Modbus TCP/IP network.The module boasts a 5000 16-bit register data space for efficient data transfer. The data exchange is asynchronous, ensuring smooth operation of the system even under heavy load conditions. This module is compatible with various devices that support the Modbus TCP/IP protocol, including those hosted by Modicon Quantum processors and controlled by operator interface software applications.The Prosoft Modbus TCP/IP Communication Module is a reliable choice for enhancing communication between CompactLogix processors and Modbus TCP/IP protocol-compatible devices. Its robust design and advanced features make it an essential component in any industrial automation setup.

TeSys F AC coil 110V 40-400Hz (voltage code F7), low inrush consumption, short operating times, for TeSys F 3-pole and 4-pole contactors LC1 F500, FG500. To be associated with a rectifier DR5TF4U (to be ordered separately). It operates in the voltage limits 0.85-1.1 Uc and environments until 70°C. It provides to the contactor high operating rates until 3600 cycles/hour. Green Premium compliant (RoHS/REACh).

The Pull Release Emergency Stop is a maintained/momentary device designed for safety applications. It features a mushroom shape with a diameter of 40 mm and is available in red color. This emergency stop is non-illuminated, meaning it does not have any built-in lights to indicate its status. Additionally, it does not include a contact block for additional functionality.

8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 50 ampere and a resistive rating of 65 amperes. It also has a 3 HP at 115 VAC single phase, 10 HP at 230 VAC single phase and 15 HP at 230 VAC three phase, 30 HP at 460 VAC three phase and 30 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 4.06 inches by 2.56 inches and 3.67 tall. These contactors are UL component recognized and CSA certified.

The EF65 is an self-supplied electronic overload relay, which means no extra external supply is needed. It offers reliable and fast protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the contactors. Single mounting kits are available as accessory. The EF65, EF96 and EF146have ATEX and IECEx certification 1) 1) ATEX is valid for products produced from week 42, 2014. IECEx is valid for products produced from week 15, 2017.

The softstarter PSR45-600-11 has a rated maximum operational current of 45 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

SINAMICS g110d AC-drive, with repair switch with built in cl. a filter with bult in braking chopper with as-interface bus interface 3AC380-500v +10/-10% 47-63HZ output high overload 0,75KW for 200% 3s,150% 60s,100% 300s ambient temp -10 to +40 deg c 210 x 450 x 145 (hxwxd), fsa protection IP65 without operator panel

The Siemens SIMATIC S7-300 Digital Output Module is a robust solution designed to meet the demands of modern industrial automation. This module is equipped with 8 digital outputs, each capable of handling a voltage of 24 V DC and a current of 0.5A. It features short-circuit protection diagnostics for enhanced safety and reliability. The module also includes a 20-pole connector, ensuring seamless integration with various industrial systems. Its isolated design provides added protection against electrical interference, making it an ideal choice for applications where precision and reliability are paramount.

The Schneider EasyLogic PM2230 is a highly accurate power and energy meter designed for panel or flush mounting. It boasts a 96mm by 96mm bezel and a backlit LCD display with a resolution of 128 by 128 pixels. This meter offers high precision in measuring active energy, complying with Class 0.5S of the IEC 62053-22 standard, and a sampling rate of 64 samples per cycle. It measures active, apparent, and reactive power, along with voltages, current, frequency, and power factor. Additionally, it provides total harmonic distortion and individual harmonics up to the 31st order.Key Features:Class 0.5S accuracy for active energyMeasures up to the 31st harmonicRS485 communication port with Modbus RTU protocolUniversal control power voltage range (80-300 V AC/DC)Supports multiple wiring schemesApplications:Power monitoringSub billingPower quality analysis

SIMATIC dp, 5 universal terminal modules tm-e15n26-a1 for et 200s, for electronic modules, 15mm width, fast connect terminal, 2x6 terminal connections with terminal lead to aux1, aux1 in line, 5 pieces per packaging unit

This product is a specialized cooling fan designed to work with Schneider Electric's Altivar Process 600 and 900 variable speed drives. The fan is suitable for applications ranging from 110kW to 315kW and operates at voltages between 380V and 440V. It is designed to enhance the lifespan of the drive by efficiently dissipating heat.The fan features a fixed body made of plastic, with dimensions of 11cm (width) x 10cm (length) x 10cm (height), and weighs approximately 1.2kg. It is compatible with Altivar Process drives from ATV630C11N4F to C31N4F, ATV650C11N4F to C31N4F, ATV930C11N4F to C31N4F, and ATV950C11N4F to C31N4F. The kit includes one door fan, one bracket, and an instruction sheet.This cooling fan is ideal for use in variable speed drives for pumps, fans or compressors up to 2600 kW, as well as conveyors, cranes, or mills up to 2600 kW. Its compact design and high efficiency make it a valuable addition to any industrial automation system.