Wago
280-829
1 / 3
- Part Number
- 280-829
- Tariff Code
- 85365080900
- UPC
- 4044918691390
- ETIM
- Group Code : EG000012
- Group Description : Terminal blocks
- Class Description : (Knife) disconnect terminal block
- Class Code : EC000902
- Version : 7
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Ratings Per Iec/En
- Nominal voltage (III/3)
- 400 V
- Rated impulse voltage (III/3)
- 6 kV
- Rated current
- 10 A
- Legend (ratings)
- (III / 3) ≙ Overvoltage category III / Pollution degree 3
Environmental Requirements
- Processing temperature
- -35 … +85 °C
- Continuous operating temperature
- -60 … +105 °C
Physical Data
- Width
- 5 mm / 0.197 inches
- Height
- 75 mm / 2.953 inches
- Depth from upper-edge of DIN-rail
- 52.5 mm / 2.067 inches
Material Data
- Note (material data)
- <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
- Color
- Gray
- Material group
- I
- Insulation material
- Polyamide (PA66)
- Flammability class per UL94
- V0
- Fire load
- 0.160 MJ
- Weight
- 10.900 g
Mechanical Data
- Design
- Horizontal type
- Mounting type
- DIN-35 rail
- Marking level
- Center marking
Specifications
- Product Group Code
- 0001
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4044918691390
- Customs tariff number
- 85365080900
Power Loss
- Power loss, per pole (potential)
- 0.133 W
- Rated current IN for specified power loss
- 10 A
- Resistance value for specified, current-dependent power loss
- 0.00133 Ω
Connection 1
- Connection technology
- CAGE CLAMP®
- Actuation type
- Operating tool
- Connectable conductor materials
- Copper || Aluminum
- Connectable conductor materials (note)
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
- Solid conductor
- 0.08 … 2.5 mm² / 28 … 12 AWG
- Fine-stranded conductor
- 0.08 … 2.5 mm² / 28 … 12 AWG
- Note (conductor cross-section)
- 12 AWG: THHN, THWN
- Strip length
- 8 … 9 mm / 0.31 … 0.35 inches
- Wiring direction
- Front-entry wiring
