ISN-SM-50

Technical Specifications

Alarm holding time

Approx. 2.5 sec

Temperature (operating)

-40 °C to +70 °C

Reduction to

1/8 of current setting

Power supply monitoring

8 VDC to 16 VDC (12 V nominal)

For reduction

Low < 1.5 VDC High > 3.5 VDC

Weight

0.320 kg

Test connection

Analog integration signal

For the test

Low < 1.5 VDC High > 3.5 VDC

Dimensions

8.9 cm x 8.9 cm x 2.2 cm

Test duration (including test transmitter ISN-GMX-S1)

≤ 3 sec

Alarm relay (changeover contact)

Contact closed in standby mode (opened in the event of an alarm) designed for 30 VDC, 100 mA, resistance < 20 Ohm

Power consumption at 12 VDC

Alarm: 6 mA

HF interference tolerance (EN 61000-4-3)

No alarm or setup at critical frequencies within a range of 1 MHz to 1000 MHz at > 30 V/m.

Temperature (storage)

-50 °C to +70 °C

Housing protection class (EN 60529, EN 50102)

IP435

Model

Operating radius Monitoring area

Humidity (EN60721)

Up to 95% relative humidity, not condensing

ISN-SIM-80

5 m 2,5 m 80 m2

Tamper switch/wall tamper

Tamper contact closed in standby mode (opened in the event of tampering) designed for 30 VDC, 100 mA, resistance < 45 Ohm

Concrete

Steel Concrete

Compatibility

Better than EN 50130-4

ISN-SIM-50

4 m 2 m 50 m2

Specifications

Country of Origin

Hungary

Gross Weight (Kg)

0.26

Net Weight (Kg)

0.247

Length (M)

0.104

Width (M)

0.116

Height (M)

0.062

Gross Weight (Lbs)

0.57321

Net Weight (Lbs)

0.54455

Length (In)

4.0944899999999995

Width (In)

4.566929999999999

Height (In)

2.44095

Material

F.01U.002.248

Documents