ESAB Industrial Automation Spare Parts

ESAB® Valve Pin PT-32

ESAB® Nozzle 90 Amp, PT-37/38, Package of 5

ESAB® Nozzle 2.3 MM (.090 in.) PT-36, Package of 5

REQUIRES - 0558003027

Spoolarc 86 is a copper-coated solid wire containing high levels of manganese and silicon. Spoolarc 86 is suitable for many carbon steel welding applications using the MIG/Gas Metal Arc Welding (GMAW) process. The high levels of deoxidizers in Spoolarc 86 provide excellent tolerance of rust and mill scale. The high levels of manganese and silicon also provide excellent wetting action and a highly fluid weld puddle. Shielding gas choices for Spoolarc 86 in the GMAW mode are 100% carbon dioxide, argon/carbon dioxide mixtures, argon/oxygen mixtures, and other argon based mixed gas blends. Spoolarc 86 excels in HVAC duct work, heavy equipment fabrication, structural, and other general steel fabrication.

The principal application of AtomArc® 9018-CM electrodes is for welding 2 1/2% Cr - 1% Mo steels commonly found in pressure vessels, heat exchangers, pipings and other related components.

ESAB® Gas Baffle 90-100Amp, PT-37/38

ESAB® Retaining/Shield Cup, PT-38

ESAB® Gas Baffle 30-80Amp, PT-37/38/39

Tigrod ER80S-B2 is a chrome-moly TIG rod used for joining creep resistant steels of the 0.5% Cr - 0.5% Mo, 1% Cr - 0.5% Mo, and 1.25% Cr - 0.5% Mo grades. These non-copper-coated rods are primarily used to fabricate and repair power piping and boilers in the power generation industry.

Acetylene Welding Head for W-300 torch. Steel thickness of 32-25 gauge. Cleaning Drill size of 72

ESAB® Nozzle measuring 2.5 mm is compatible for PT-36 Plasmarc™ mechanized cutting torch with a current rating of 300 A.

AtomArc® 7018 is an all-position low hydrogen moisture resistant electrode. AtomArc® 7018 was developed to weld carbon and low-alloy steels, including a variety of hardenable steels.

AtomArc® 10018-M1 is a low hydrogen, iron powder all-position electrode specially formulated to meet the more stringent requirements of Military Specification MIL-E-0022200/10 for mechanical properties, low coating moisture and diffusible hydrogen content. Hydrogen coupons analyzed by the gas chromatography method showed an average of 0.03 ml/g of diffusible hydrogen. Atom Arc 10018-M1 electrode is intended for welding high tensile steels, such as HY-80, HSLA-80, A710 and T-1 steel.

Dual Shield 7000-A1 is an all-position flux cored electrode recommended for 0.5% Mo steels. It is used in the fabrication and erection of boilers, pressure piping and tubing and other pressure vessel applications. Shielding gas of 100% CO2 and 75% Ar, remainder CO2 may be used. The weld metal analysis is similar to an E7018-A1 low hydrogen electrode.

AtomArc® 7018-Mo electrodes contain 1/2% Mo as alloy addition. They are recommended for welding low-alloy, high tensile steels of 50 ksi (345 MPa) minimum yield strength and also 1/2% Molybdenum steels and pipes. They are widely employed in the fabrication and erection of boilers, pressure piping and tubing and other pressure vessel applications.

Coreshield 11 is an all-position self-shielded flux cored welding wire meeting all requirements for the E71T-11 classification. Coreshield 11 is excellent for use on single or multiple pass lap, fillet and butt welds on mild steels in all welding positions. Limitations do exist for multipass welds in excess of 1/2 in (12.7 mm). It produces smooth arc action, full slag coverage, easy slag removal, and low spatter. This product should find excellent acceptance in general purpose mild steel fabrication. In structural fabrication, the product can be used where no seismic requirements are present. Coreshield 11 is run DCEN.

AtomArc® 8018-CM electrodes contain 1 1/4% Cr and 1/2% Mo as alloy addition. They are used for the welding of such steels as 1/2% Cr - 1/2% Mo, 1% Cr - 1/2% Mo, and 1 1/4% Cr - 1/2% Mo, which are used principally in power piping and boiler work for the fabrication of plates, pipes, tubes, castings, and forgings.

Spoolarc 29S is a general purpose copper-coated solid wire suitable for many carbon steel welding applications using the MIG/Gas Metal Arc Welding (GMAW). Spoolarc 29S contains moderate amounts of manganese and silicon to provide sufficient deoxidation over light mill scale. Shielding gas choices for Spoolarc 29S in the GMAW mode are 100% carbon dioxide, argon/carbon dioxide mixtures, argon/oxygen mixtures, and other argon based mixed gas blends. Spoolarc 29S is used in a wide variety of applications including heavy equipment, automotive parts, railcars, agricultural equipment, and sheet metal welding.

AtomArc® 8018-B3L electrodes contain 2 1/4% Cr and 1% Mo alloy additions with low carbon content. The electrode is designed for welding 2 1/4% Cr - 1% Mo steels. The rod operates with a very stable arc and minimal spatter. The low carbon analysis of the weld metal contributes to its crack resistance. The addition of Cr and Mo provide for the excellent creep and stress rupture properties of weldments subjected to elevated temperature service