Minarik Drives Industrial Automation Spare Parts

Minarik Drives' MM23002D is the latest revision to its most popular line. This SCR drive is dual voltage (115 or 230VAC) and in the industry standard MM footprint (3.58''X 4.30''). This drive is more resilient to vibration than its predecessor and comes with another new feature, a user-selectable inhibit circuit. Now the user can adjust the function of the inhibit with jumper pins. The MM23002D drive now comes with LEDs to let the user know when the power is on (green) or if the motor has reached the current limit (red). For applications that require control of a DC motor in the 1/8 to 2 HP range,the MM23002D is an excellent solution.

The MM23001C drive is a reliable and cost-effective solution for controlling your permanent magnet or shunt-wound DC motors in variable-speed applications. It uses SCR's to provide full-wave rectification of the AC line input. This dual voltage drive operates using 115 VAC or 230 VAC, 50/60 Hz, to operate 90 or 180 VDC SCR brush-type motors from 1/8 to 2 HP. Packaged in a compact footprint, this user-friendly drive possesses diagnostics and options to accommodate user needs.

The MMRG40U is one of the smallest full-wave four-quadrant drives on the market today. This full-featured, compact drive matches brush-type DC motors ranging from 1/20 to 2HP. The MMRG40U provides all the performance of a full size, four quadrant, regenerative variable speed drive and has our popular MM footprint (3.72 X 4.42). This drive will maintain motor speed with smooth motoring and braking torque and allow high-duty cycle reversing and braking. It has an adjustable current limit, 1% of base speed regulation and can regulate within a 50:1 speed range (open loop).

RG6 Series RG61U RG60U Series

The MMRG31U is one of the smallest full-wave four-quadrant drives on the makert today. This full-featured, compact drive matches brush-type DC motors ranging from 1/20 to 2HP. The MMRG31U provides all the performance of a full size, four quadrant, regenerative variable speed drive and has our popular MM footprint (3.72 X 4.42). This drive will maintain motor speed with smooth motoring and braking torque and allow high-duty cycle reversing and braking. It has an adjustable current limit, 1% of base speed regulation and can regulate within a 50:1 speed range (open loop).

Minarik Drives expanded the XP series of low-cost, high-performance, pulse-width-modulation (PWM) DC drives to offer the PCMXP10-115AC, which accepts any external analog process control signal from 0 to 10VDC. Users can operate the drive in two distinct modes: manual mode using normal potentiometer operation or signal mode: operation from an external signal input only. Standard XP drives are versatile and accept any voltage ranging from 70 to 130VAC. XP drives contain a unipolar power supply, which enables them to accept any DC volage input between 100 and 160VDC. Users, after proper calibration, can operate many low voltage motors without additional circuitry. The PCMXP10-115AC yields a constant 1.05 form factor or less over the entire 80:1 speed range resulting in smooth, quiet, cool and low maintenance motor operation.

The MMRG30U is one of the smallest full-wave four-quadrant drives on the market today. This full-featured, compact drive matches brush-type DC motors ranging from 1/20 to 2HP. The MMRG30U provides all the performance of a full size, four quadrant, regenerative variable speed drive and has our popular MM footprint (3.72 X 4.42). This drive will maintain motor speed with smooth motoring and braking torque and allow high-duty cycle reversing and braking. It has an adjustable current limit, 1% of base speed regulation and can regulate within a 50:1 speed range (open loop).

The MM23001C-Q drive is a reliable and cost-effective solution for controlling your permanent magnet or shunt-wound DC motors in variable-speed applications. It uses SCRs to provide full-wave rectification of the AC line input. This dual voltage drive operates using 115 VAC or 230 VAC, 50/60 Hz, to operate 90 or 180 VDC SCR brush-type motors from 1/8 to 2 HP. Packaged in a compact footprint, this user-friendly drive possesses diagnostics and options to accommodate user needs. Users can minimize wiring problems with the -Q option to make all wire connections to the screw terminals of a quick-connect removable terminal block.

The MC10-R accepts 115 or 230VAC input for operation of 90 and 180VDC permanent magnet or shunt wound DC motors (50/100/200VDC field voltage) from 1/8 to 2 horsepower. Included are power and current limit LEDs, line fuses, inhibit pins for remote start/stop and mounted on the front cover are a speed potentiometer and On/Off switch. Setup is easy with trimmer pot adjustments for minimum speed, maximum speed, acceleration, deceleration, IR compensation and current limit and a screw terminal block for easy wire connections.

The DC-4Q series of drives are DC in/DC out PWM chassis drives capable of four quadrant reversing and braking. This series of drives is ideal for portable battery powered equipment. The DC-4Q has the ability to maintain variable speed even as battery decreases and has a sleep mode for extended battery life while not in use. The four quadrant capability allows simple connections for fast reversing and/or braking without the need for bulky contactors or braking resistors. The 1.01 form factor produces clean DC output for efficient and quiet motor operation. Like all Minarik Drives products, these units are built in the USA. The DC-4Q series of drives have adjustments for IR Compensation, Motoring Current Limit, Regenerative Current Limit, Forward Max Speed, Reverse Max Speed, Min Speed, Deceleration and Acceleration Time. These drives are microprocessor based meaning these ranges can be reprogrammed to meet any custom needs. The DC-4Q series also has Power and Fault LEDs, including current limit, under voltage, overheat and short circuit. The DC-4Q is available in two models, one for 12-24V systems, the other is designed for 36-48V systems. For simplicity and safety, no jumpers or switches are required for selecting voltages.

The M2 drive provides the power of two drives in one! Now with one DC drive, you can control two different DC motors either independently or in a ratio mode. In independent mode, each side of the M2 can be controlled differently with different trimmer pot settings and different speeds. In speed ratio mode, one speed potentiometer sets the main speed while the other one determines the ratio of the speeds between the motors. In this mode, the drive replaces two single drives and possibly a separate master/follower card too resulting in extreme cost and panel space savings The M2 drive is easy to set up with simple jumpers to choose the modes speed/torque, independent/ratio and coast/decel to stop. In speed mode where speed is controlled, the external potentiometer sets the speed reference signal and the current limit trimmer pot sets the current limit. In torque mode, the external potentiometer sets the torque reference and the current limit trimmer pot sets the runaway speed limit. Set up parameters are easily adjusted with onboard trimmer pots. For OEMs that have fixed settings, the M2 drive is microprocessor based and can have the settings or ranges of the trimmer pots and other functions customized without any hardware changes. The M2 drive is ideal for applications with two DC motors that are working together, two motors that run independently but are physically close or simply when panel space is very limited.

Minarik Drives offers the RD16U drive for cost sensitive, variable speed, applications. This lightweight compact drive controls DC Brush-type motors ranging from 1/8 – 1/4HP, without any additional components required. Reduced circuitry allows the cost to decrease significantly and also lends to a very compact package, ideal for original equipment manufacturers.

The MDBL Series is a general purpose family of drives for brushless DC (electronically commutated) motors. With either a 115 VAC or 230 VAC line source, our drives can control motors that vary in the 90 to 180 VDC range, up to 5 amps or 1.5 HP. With the use of on-board trim pots, you can quickly set the maximum and minimum speeds, acceleration and deceleration rates, motoring and regening current limits, and the proportional and integral feedback gains. Each drive is designed for feedback from 120° hall effect sensors. The onboard microprocessor allows for custom programming for OEMs. Whether it’s as simple as changing the purpose of a jumper, input, or trim pot, to programming entire routines and behaviors specific only to the OEMs application, the MDBL is great for integrating PLC like functionality into your operation. Doing this can eliminate the need of a separate PLC altogether or enhance a system that currently does not have one. The MDBL Series has been tested to the 61800-5-1 Standard and is UL listed in the US and Canada, and includes isolation for remote control from an analog signal.

1 Anodized Stainless Steel Heat Sink 4 6-32 x 3/8 screws

The MC10 accepts 115 or 230VAC input for operation of 90 and 180VDC permanent magnet or shunt wound DC motors (50/100/200VDC field voltage) from 1/8 to 2 horsepower. Included are power and current limit LEDs, line fuses, inhibit pins for remote start/stop and mounted on the front cover are a speed potentiometer and On/Off switch. Setup is easy with trimmer pot adjustments for minimum speed, maximum speed, acceleration, deceleration, IR compensation and current limit and a screw terminal block for easy wire connections.

Minarik Drives expanded the XP series of low-cost, high-performance, pulse-width-modulation (PWM) DC drives to offer the PCMXP02-115AC, which accepts any external analog process control signal from 0 to 10VDC. Users can operate the drives in two distinct modes: manual mode using normal potentiometer operation, or signal mode: operation from an external signal input only. Standard XP drives are versatile and accept any voltage ranging from 70 to 130VAC. XP drives contain a unipolar power supply, which enables them to accept any DC volage input between 100 and 160VDC. Users, after proper calibration, can operate many low voltage motors without additional circuitry. The PCMXP02-115AC yields a constant 1.05 form factor or less over the entire 80:1 speed range resulting in smooth, quiet, cool and low maintenance motor operation.

Minarik Drives' MM23202D is the latest revision to its most popular line. This SCR, dual voltage (115 or 230VAC) drive comes in a NEMA 1 enclosure and is more resilient to vibration than its predecessor and comes with another new features, a user-selectable inhibit circuit. Now the user can adjust the function of the inhibit with jumper pins. The MM23202D drive now comes with LEDs to let the user know when the power is on (green) or if the motor has reached the current limit (red). For applications that require control of a DC motor in the 1/8 to 2 HP range, the MM23202D is an excellent solution.

Minarik Drives has always been a leader in providing low cost PWM motor controls. With the MMXL02-D240AC, we have done it once again, by taking a full-featured PWM drive and reduced it down to the standard MM footprint (4.30 X 3.64). The MMXL02-D240AC has all the features of the larger XL Series, where the speed can be controlled with an isolated 0-5 VDC signal and many drives can be inhibited with a single contact closure. The auto-ranging power supply allows the user to apply 120 or 240VAC without adjusting any switches. The full-featured MMXL02-D240AC is one of the smallest PWM drives on the market today!

Minarik Drives' MM23412D is the latest revision to its most popular line. This SCR, dual voltage (115 or 230VAC) drive is in a NEMA 4X enclosure and is more resilient to vibration than its predecessor and comes with another new features, a user-selectable inhibit circuit. Now the user can adjust the function of the inhibit with jumper pins. The MM23412D drive now comes with LEDs to let the user know when the power is on (green) or if the motor has reached the current limit (red). For applications that require control of a DC motor in the 1/20 to 1/4 HP range, the MM23412D is an excellent solution.

The PCM22000A drive is a cost-effective solution for variable speed, process control applications from 1/2 to 2 HP. This SCR drive integrates isolation allowing it to accept external analog process control signals. Alternative solutions require users to wire a separate isolation card to the drive which adds cost and reduces available space. Users can operate the PCM22000A drive in manual mode using normal potentiometer operation or in signal mode where drive output is proportional to an external signal input.