Sensors & Measuring Devices Phoenix Contact

Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection…

Network cable, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position halogen-free, shielded (Advanced Shielding Technology), Plug angled M8 / IP67, coding: D, on Plug straight RJ45 / IP20…

Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical…

Universally configurable temperature limit value switch with N/O relay output for the connection of 2, 3, and 4-conductor resistance thermometers and thermocouples. Configurable via DIP switch or…

Network cable, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, shielded (Advanced Shielding Technology), Plug straight M12 / IP67, coding: D, on Plug straight RJ45 / IP20, cable…

The Phoenix Contact SACB-8/ 8-C SCO P is a standard sensor/actuator box designed for versatile applications. It features an M12-SPEEDCON-socket Plastic connection method, offering 8 slots and 4…

Product Overview: The NBC-M12MSX/10,0-94F/R4AC is an advanced Ethernet CAT6 A (10 Gbps) network cable designed for high-speed data transmission. This cable features CC-Link IE CAT6 A (10 Gbps)…

Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 40 mA. For gases up to Group IIC, loop-powered…

2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact…

Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Œ© ... 100 Œ© to 0 kŒ© ... 100 kŒ©. Configurable via DIP switch or software. Screw…

The Phoenix Contact 1555392 , also known by its full part name SAC-17P- 3,0-PVC/FR SCO , is a robust, pre-assembled sensor/actuator cable designed for reliable signal transmission in demanding…

Product Overview: The Standard Sensor/Actuator Box - SACB-10/3-L- 5,0PUR-M8 is a versatile solution designed for various applications. It features an M8 socket Metal connection method, providing…

Sensor/actuator box, application: Standard, connection method: M12-SPEEDCON-socket Plastic, number of slots: 8, number of positions: 5, coding: A - standard, slot assignment: Double, status display…

The MINI MCR-2-I0-U is a specialized signal conditioner that provides electrical isolation for analog signals. It features a 3-way isolation design, enabling the effective separation of input and…

Experience reliable data transmission with our NBC-M12FSD/ 1,0-93C/R4AC Network Cable . This cable is designed for high-speed connectivity, supporting both PROFINET and EtherCAT ® at a speed of 100…

Bus system cable, INTERBUS (16 Mbps), 5-position, PUR halogen-free, may green RAL 6017, shielded, Plug straight M12 SPEEDCON, coding: B, on Socket straight M12 SPEEDCON, coding: B, cable length: 0.5 m

Ex i repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4 ‚Ķ 20 mA signals from the Ex area to a load (active or passive) in the safe area. 3-way…

3-way output signal conditioner for transmitting 0/4 ... 20 mA signals from the controller to a load located in the field with simultaneous 3-way electrical isolation between the input, output, and…

Sensor/actuator box, application: Standard, connection method: M12-SPEEDCON-socket Plastic, number of slots: 8, number of positions: 5, coding: A - standard, slot assignment: Double, status display…

The sensor/actuator box is optimized for standard applications, utilizing an M12-SPEEDCON plastic socket connection. This model features four slots and accommodates five positions, with a coding type…