Sensors & Measuring Devices Phoenix Contact

The SACB-8/ 8-L-10,0PUR SCO is designed for standard applications, featuring a connection method utilizing an M12-SPEEDCON metal socket. It encompasses 8 slots with a total of 4 positions and adheres…

This 8-position Y distributor is equipped with a straight M12 SPEEDCON plug coded A, along with two straight M12 SPEEDCON sockets also coded A, facilitating parallel distribution of signals. The…

Proximity safety circuit up to Cat. 4, PL e (EN ISO 13849), SIL 3 (IEC 61508), multicode sensor with RFID coding, model 4 (EN ISO 14119), automatic or manual start, integrated diagnostics, 24 V DC…

Sensor/actuator box, application: Standard, connection method: M12-SPEEDCON-socket Plastic, number of slots: 8, number of positions: 5, coding: A - standard, slot assignment: Double, status display…

Sensor/actuator box, application: Standard, connection method: M12 socket Plastic, number of slots: 8, number of positions: 5, coding: A - standard, slot assignment: Double, status display: yes, pnp…

The Phoenix Contact SAC-5P-3,0-PUR/M12FRK PE SH is a high-quality power cable designed for reliable electrical connections. This product features a 5-position design with halogen-free PUR insulation…

The MACX MCR-RTD-I-SP is a temperature measuring transducer designed to convert signals from resistance temperature detectors (RTDs) and resistors into analog 0/4 - 20 mA signals. It supports a…

The MACX MCR-SL-RTD-I-SP-NC temperature transducer is designed to convert signals from various resistance temperature detectors (RTDs), including Pt, Ni, and Cu sensors, into analog signals ranging…

The Resistance/Potentiometer Transducer is a versatile device designed to connect potentiometers ranging from 0 Ω to 100 kΩ. It features plug-in connection technology for ease of use and standard…

1-channel output loop-powered 2-way repeater power supply with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in…

The MACX MCR-EX-SL-IDSI-I is designed for applications requiring the transmission of 0/4-20 mA signals in hazardous areas, ensuring intrinsic safety. This unit effectively isolates and transmits…

Isolating amplifier with safe electrical isolation and wide-range power supply (24 V ... 230 V AC/DC). DIP switches on the front, over 1600 signal conversions can be set. Standard configuration (IN 0…

Configurable temperature transducer for the connection of thermocouples. Can be configured via DIP switches or, with extended functionality, using the software. Screw connection, standard…

Bus system cable, CANopen®, DeviceNet™, 5-position, PUR halogen-free, red lilac RAL 4001, shielded, Socket straight M12 SPEEDCON, coding: A, on Socket straight M12 SPEEDCON, coding: A and Plug…

Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4‚Ķ20 mA signal to a load in the safe area. Freely programmable. 3-way…

Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault…

Bus system cable, CANopen®, DeviceNet™, 5-position, PUR halogen-free, silver-gray RAL 7001, shielded, Plug straight M12 SPEEDCON, coding: A, on Socket straight M12 SPEEDCON, coding: A, cable length…

The Safety Switch Actuator PSR-CT-C-ACT is engineered for proximity safety applications, providing a safety circuit compliant with Cat. 4 and performance level e according to EN ISO 13849. It also…

Network cable, Ethernet CAT6A (10 Gbps), CC-Link IE CAT6A (10 Gbps), 8-position halogen-free, shielded (Advanced Shielding Technology), Plug straight M12 / IP67, coding: X, on Plug straight RJ45 /…

Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD)…