Phoenix Contact Industrial Automation Spare Parts

The DEK-REL- 24/O/1 is a relay terminal block equipped with soldered miniature relays, suitable for small to medium loads. It features one normally open (N/O) contact, operating at an input voltage of 24 V AC/DC, and is designed for assembly on NS 35/7.5 with a terminal width of 6.2 mm.Constructed for a long mechanical service life of approximately 20 million cycles, this module operates under an overvoltage category of III and a pollution degree of 2. The typical input current at nominal voltage is 6.5 mA, with a response time of 5 ms and a release time of 15 ms. The contact material is crafted from AgNi, hard gold-plated, allowing for a maximum switching voltage of 250 V AC and a limiting continuous current of 3 A.With an ambient temperature range of -20 °C to 50 °C for operation, and -20 °C to 70 °C for storage, the module is suitable for diverse environmental conditions. The connection method utilizes screw connections, supporting conductor cross-sections from 0.2 mm² to 2.5 mm². Additionally, a bridge rectifier is included for protective circuitry, along with a yellow LED for operating voltage display.

The CBB TM 08 2X4RC P-PT is a DIN rail module designed for use with eight CB TM1 thermomagnetic circuit breakers. It facilitates group remote signaling and provides central supply and potential distribution for up to five loads per channel. This module features a maximum load current of 60 A for the complete main circuit and allows for a rated current of 12 A per channel. The device is built to withstand an ambient temperature range of -30 °C to 60 °C during operation, ensuring reliability in various environments. Constructed as a two-section, divisible module, it adheres to standards specified by DIN EN 50178. The protection class III ensures user safety, while its overvoltage category II and degree of pollution 2 designations further enhance its operational integrity. The push-in connection method simplifies installation, accommodating conductor cross-sections from 0.2 mm² to 2.5 mm², whether flexible or rigid. The device is rated for an insulation voltage of 50 V DC and a surge voltage of 0.5 kV, providing strong protection against electrical faults. With a compact size of 185.5 mm in width, 127.8 mm in height, and 70.8 mm in depth, it is designed for horizontal mounting on a standard 35 mm DIN rail.

The PTFIX 6/6X2,5-FE-G is a distribution block designed for efficient electrical connections. It supports bridging between blocks via the conductor shaft, facilitating greater connectivity when paired with corresponding plug-in bridges found in accessories.This terminal block operates at a nominal voltage of 450 V and can handle a nominal current of 24 A. The connection method utilizes a push-in design, allowing for a cross-sectional range from 0.14 mm² to 4 mm², with a rated cross-section of 6 mm². Its adhesive mounting type is complemented by a black and yellow color scheme.With a total of 7 connections per level and a single row layout, the block adheres to IEC 60998-2-2 standards. It is rated for overvoltage category III and has a pollution degree of 3. The rated surge voltage is specified at 6 kV, supporting robust electrical performance in various applications.This product has passed stringent tests for flammability and smoke toxicity, making it suitable for use in rail vehicles under DIN EN 45545-2 standards. The operating temperature range extends from -35 °C to 110 °C, ensuring reliability in diverse environmental conditions.

The IB IL AO 2/SF-2MBD-PAC is an inline analog output terminal designed for industrial applications, providing two analog outputs. The device supports voltage output signals ranging from 0 V to 10 V and current output signals from 0 mA to 20 mA, as well as 4 mA to 20 mA. It utilizes a 2-conductor connection technology, ensuring reliable transmission.With a transmission speed of 2 Mbps in the local bus and a protection class of IP20, this module is suitable for various operational environments. The device is characterized by a compact profile, measuring 48.8 mm in width, 136.8 mm in height, and 71.5 mm in depth. It is designed to operate efficiently within an ambient temperature range of -25 °C to 55 °C while maintaining functionality under specific humidity conditions.Included with the terminal are inline connectors and marking fields, enhancing ease of installation and identification. The analog output module features short-circuit protection on its outputs and operates with a supply voltage of 24 V DC, supporting a wide voltage range of 19.2 V DC to 30 V DC, which accommodates various system configurations.

The SACC-CI-M12MST-4CON-L180 TOR is a flush-type connector optimized for power applications, supporting four positions. It utilizes a straight plug design intended for PCB mounting, employing THR solder connection techniques. This product complies with RoHS II standards without exemption 6c, ensuring that lead content is below 0.1%.Manufactured in Germany, this connector is notable for its operational reliability, assuming correct locking and mounting. In cases where the connector is unlocked or exposed to potential contamination, it must be sealed with a protective cap to achieve an IP54 rating. The connector is equipped with a coding type T and features a degree of protection rated at IP67 when properly connected.With a rated surge voltage of 1.5 kV and a nominal current of 12 A, it operates effectively within an ambient temperature range of -25 °C to 105 °C. The connector's contact resistance is ≤ 3 mΩ and insulation resistance is ≥, ensuring optimal electrical performance. The component is also designed for overvoltage category III and pollution degree 3, making it suitable for various industrial environments.

The PP-H 2,5/5 (1GNYE/4GY) plug is designed for efficient electrical connections, accommodating a nominal voltage of 500 V and a nominal current of 24 A. It utilizes a push-in connection method, allowing for straightforward installation with a rated cross section of 2.5 mm². The plug supports a flexible cross section range from 0.14 mm² to 4 mm², making it versatile for various applications.This component features a compact design with a width of 25.8 mm, height of 15.8 mm, and depth of 40.2 mm, all while maintaining a standard color of gray (RAL 7042). The plug is manufactured in Poland and complies with IEC 61984 standards, ensuring reliable performance.With a maximum load current of 24 A using a 4 mm² conductor cross section, this plug is equipped to handle demanding electrical tasks. It also operates effectively under a wide temperature range, from -60 °C to +70 °C for short periods, and is rated for overvoltage category III and pollution degree 3, making it suitable for a variety of environments.

The FP 0,8/ 32-MV-SH 1,15 is a shielded SMD male connector that operates at a nominal current of 1.7 A and supports a test voltage of 500 V AC. This connector is engineered with 32 positions arranged in a linear pad geometry, ensuring precise alignment and connectivity.Constructed from a black LCP housing, this component features gold-plated contacts for optimal conductivity and reliability. It is suitable for SMD soldering with compatibility for reflow soldering processes. The connector’s dimensions include a width of 16.7 mm, height of 6.25 mm, and length of 6.1 mm, with an installed height of 5.65 mm, making it versatile for various applications.Furthermore, it meets the standards set by DIN EN 50155 and is compliant with WEEE/RoHS directives, ensuring it is free from hazardous substances. The connector has a high insulation resistance of ≥ 5 GΩ between neighboring positions and is tested to withstand up to 500 V AC power-frequency voltage.Designed for durability, it supports insertion/withdrawal cycles up to 500 times and operates effectively in a temperature range from -55 °C to 125 °C. Its moisture sensitivity level is rated at MSL 1, allowing for reliable handling during assembly. Overall, this connector is ideal for high-performance electronic applications requiring reliable connections.

The COMBI receptacle, designated as SC 2,5-NS/ 1-L GNYE, operates at a nominal voltage of 500 V and supports a nominal current of 24 A. Its spring-cage connection method accommodates conductor cross-sections ranging from 0.08 mm² to 4 mm², with a rated cross section of 2.5 mm². This device is designed for mounting on NS 35/7.5 and NS 35/15 rails, and is identified by its green/yellow coloring.With a compact width of 5.2 mm and an overall height of 43.5 mm, this receptacle is suitable for applications in the railway industry. It features a single position and connection, with an overvoltage category of III and a degree of pollution rated at 3. The maximum power dissipation under nominal conditions is 0.77 W, and it achieves a rated surge voltage of 6 kV.In terms of environmental performance, the receptacle is rated for operational temperatures between -60 °C and 70 °C, with storage conditions allowing for a range of -25 °C to 60 °C. The insulating material, made from PA, possesses a flammability rating of V0 per UL 94 standards, ensuring compliance with safety regulations. This product is tested for various mechanical and thermal conditions, making it a reliable component in demanding applications.

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, number of potentials: 16, number of rows: 1, number of positions: 16, number of connections: 16, product range: FK-MCP 1,5/..-STF, pitch: 3.81 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 0 °, number of solder pins per potential: 1, plug-in system: COMBICON MC 1,5, locking: Screw locking, mounting: Screw flange, type of packaging: packed in cardboard

Introducing the ELR H5-I-PT- 24DC/500AC-9-P, a cutting-edge hybrid motor starter that offers an innovative solution to conventional reversing contactors. This advanced device is designed to reverse 3~ AC motors with a maximum current capacity of 9 A, ensuring optimal performance and protection for your machinery.One of the key features of this hybrid motor starter is its ability to provide motor protection. It is equipped with advanced safety measures that monitor the motor's operating conditions and take necessary actions to prevent any potential damage or malfunctions. This feature not only enhances the lifespan of your motor but also ensures the smooth operation of your machinery.The ELR H5-I-PT- 24DC/500AC-9-P is designed with flexibility in mind. It comes with a DIN rail connector, allowing for easy supply and relay extension. This feature enables you to customize the starter to fit your specific requirements and maximize its efficiency.

PCB headers, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: MC 1,5/..-G, pitch: 3.81 mm, screw head form: L Slotted, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.4 mm, number of solder pins per potential: 1, plug-in system: COMBICON MC 1,5, Pin connector pattern alignment: Standard, locking: without, mounting: without, type of packaging: packed in cardboard

The Digital Input Terminal IB IL 24 DI 16-PAC is an inline device designed for digital inputs, featuring a total of 16 inputs operating at 24 V DC. It employs a robust 3-conductor connection technology, ensuring reliable data transmission at speeds up to 500 kbps within the local bus. This terminal is equipped with IP20 protection, making it suitable for a variety of industrial environments.The IB IL 24 DI 16-PAC comes complete with inline connectors and marking fields, enhancing its functionality and ease of use. Its compact design and high-quality construction make it an ideal choice for automation and control systems in various industries.

PCB terminal block, nominal current: 32 A, rated voltage (III/2): 1000 V, nominal cross section: 4 mm², number of potentials: 2, number of rows: 1, number of positions per row: 2, product range: MKDS 5, pitch: 9.52 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. The article can be aligned to create different nos. of positions!

FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (multimode)

The GFKC 2.5 mm² Green Female PCB Connector is a high-quality electrical component designed for reliable and efficient power distribution in various applications.Key Features:Nominal Cross-Section: 2.5 mm²Color: GreenNominal Current: 12 AContact Surface: TinType of Contact: Female ConnectorNumber of Potentials: 3Number of Rows: 1Number of Positions: 3Number of Connections: 3Product Range: GFKC 2.5/..-STF-EXPitch: 7.62 mmConnection Method: Push-in Spring ConnectionConductor/PCB Connection Direction: 0°Locking Clip: - Locking ClipPlug-in System: COMBICON MSTB 2.5 EXLocking: Screw LockingMounting: Screw FlangeType of Packaging: Packed in Cardboard

The MC 1,5/16-GF-3,5 P20 THR is a high-performance PCB header designed for industrial applications. With a nominal cross section of 1.5 mm² and a color of black, this product can handle up to 8 A at a rated voltage of 160 V (III/2). The contact surface is tin-plated, ensuring reliable electrical connections. This male connector features 16 positions, each with a tin-plated contact surface. It has a linear pinning layout and a solder pin [P] of 2 mm in length. The product range is MC 1,5/..-GF-THR, with a pitch of 3.5 mm. The PCB header is designed for THR soldering and uses the COMBICON MC 1,5 plug-in system. It has standard pin connector pattern alignment and screw locking, with a threaded flange mounting. The product is packed in cardboard for safe storage and transportation.

The FKCN 2,5/10-STF is a high-quality PCB connector designed to meet the demands of modern industrial applications. With a nominal cross section of 2.5 mm² and a green color, it is visually distinct and easy to identify in complex systems. This connector is rated for a nominal current of 12 A and a voltage rating of 320 V (III/2), ensuring reliable performance even under demanding conditions. The contact surface is made from tin, providing excellent conductivity and durability. As a female connector, it offers 10 potentials arranged in a single row with 10 positions and connections. It features a pitch of 5 mm and a push-in spring connection for easy conductor/PCB alignment. The COMBICON MSTB 2,5 plug-in system ensures secure and efficient installation. The connector is equipped with screw locking and mounting via a screw flange, providing flexibility in installation. It comes packed in cardboard for safe transportation and storage. This product belongs to the FKCN 2,5/..-STF range, offering a comprehensive solution for various industrial applications.

Introducing the FRONT-MSTB 2.5/14-STF PCB connector, a high-performance solution designed for reliable electrical connections in various applications. Technical Specifications: Nominal cross-section: 2.5 mm² Color: Green Nominal current: 12 A Rated voltage (III/2): 320 V Contact surface: Tin Type of contact: Female connector Number of potentials: 14 Number of rows: 1 Number of positions: 14 Number of connections: 14 Product range: FRONT-MSTB 2.5/..-STF Pitch: 5 mm Connection method: Front screw connection Conductor/PCB connection direction: 0° Locking clip: - Locking clip Plug-in system: COMBICON MSTB 2.5 Locking: Screw locking Mounting: Screw flange Type of packaging: Packed in cardboard

This product is a shielded RJ45 connector, featuring a bend protection sleeve and available in a set of 2 pieces. The connectors are specifically designed for applications where cables need to be crossed. For optimal performance, it's recommended to use the green bend protection sleeves.The shielded design of this connector ensures reliable data transmission and minimizes electromagnetic interference. The bend protection sleeve adds an extra layer of durability, protecting the connector from physical damage during installation or handling.This product is suitable for use on site, making it a versatile solution for various networking applications. Whether you're setting up a new network or expanding an existing one, this shielded RJ45 connector with bend protection sleeve is an excellent choice.

3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, screw connection technology