Phoenix Contact Industrial Automation Spare Parts

This feed-through header, designated as DFK-IPC 16/ 4-G-10,16, is designed for reliable electrical connections. It has a nominal cross section of 16 mm² and is capable of carrying a nominal current of 76 A while operating at a rated voltage of 1000 V. The component features a silver contact surface, ensuring optimal conductivity.With a single row and a total of four positions, this header has four potentials and four connections. The pin layout is linear with a pitch of 10.16 mm, and it utilizes wave soldering for mounting. Each potential has three solder pins, with a solder pin length of 4.1 mm.The header is part of the DFK-IPC 16/..-G product range and complies with various operational standards. Its construction includes a green housing made from PA, which is rated V0 for flammability according to UL 94. It also meets WEEE/RoHS compliance and is free from whiskers as per IEC 60068-2-82/JEDEC JESD 201.Notably, the header is designed to withstand significant environmental challenges, with an operational temperature range from -40 °C to 100 °C. Additionally, the component is tested for insulation resistance and contact resistance, ensuring durability and safety in various applications.

The QC 0,5/ 9-ST-3,81 is a printed-circuit board connector designed for reliable electronic connections. It accommodates a nominal cross section of 0.5 mm² and supports a nominal current of 6 A, suitable for various applications where space and efficiency are crucial. The connector is equipped with a tin contact surface, ensuring good conductivity and resistance to corrosion.With nine potentials and a single row configuration, this female connector provides a straightforward and efficient connection method through a displacement connection. The pitch measures 3.81 mm, allowing for compact integration into PCB layouts. Its design includes one solder pin per potential, facilitating easy assembly and maintenance.Constructed from green PA insulating material, the connector is compliant with WEEE/RoHS standards and is free of whiskers according to IEC 60068-2-82/JEDEC JESD 201. The operating temperature range is extensive, from -40 °C to 100 °C, making it suitable for diverse environmental conditions. Furthermore, the connector is packed in cardboard for ease of transport and storage.

Introducing the M12MSX-8QO SH Ethernet Data Connector, a high-performance solution designed for reliable data transmission. This connector supports Ethernet CAT6A at speeds up to 10 Gbps, ensuring fast and efficient data transfer. With an 8-position design, it offers ample capacity for multiple connections. The connector is halogen-free and shielded, providing enhanced protection against electromagnetic interference (EMI). It features a straight M12 SPEEDCON plug with X-coding for secure and easy connection. The insulation displacement connection ensures quick and efficient cable installation. Constructed from zinc die-cast material and nickel-plated, the connector offers robust durability and resistance to corrosion. With an external cable diameter ranging from 5 mm to 9.7 mm, it provides flexibility in cable selection. This M12MSX-8QO SH Ethernet Data Connector is a reliable choice for applications requiring high data transmission rates and secure connections.

The UM-ALU 4 AU75 L990 is a profile cover designed from press-drawn section housings, featuring a screw mounting mechanism. This unit measures 75.6 mm in external width and 71.5 mm in internal width, with a total length of 990 mm and a depth of 43.1 mm. Constructed with anodized aluminum, the housing exhibits a robust aluminum color finish. It is designed to operate within a temperature range of -40 °C to 100 °C, making it suitable for various environmental conditions. The profile cover supports up to 5 PCB holders, with a PCB thickness ranging from 1.44 mm to 2 mm. The mounting type is screw-based, positioned parallel to the DIN rail. This product is manufactured in Germany and is packed in cardboard for protection during transport.

The QC 0,5/ 8-STF-3,81 is a printed circuit board connector designed for reliable connections in various applications. It features a nominal cross section of 0.5 mm² and is capable of handling a nominal current of 6 A, with a rated voltage of 200 V according to standards III/2 and III/3. The connector has a green housing and is constructed with a tin contact surface for enhanced conductivity. With a total of 8 potentials organized into a single row, this female connector is equipped with 8 positions and connections. It employs a displacement connection method and is secured via a screw locking mechanism, ensuring a stable installation. The mounting type is screw flange, facilitating straightforward integration into existing systems. The product range is categorized under QC 0,5/..-STF, and it has a pitch of 3.81 mm. The connector's design includes one solder pin per potential, with a conductor/PCB connection direction of 0°. The locking system is reliable, requiring a tightening torque of 0.3 Nm. The insulating material is PA, with a flammability rating of V0, ensuring compliance with safety standards. In terms of environmental resilience, it operates within a temperature range of -40 °C to 100 °C, depending on the derating curve. Additionally, the connector is compliant with WEEE/RoHS regulations and free of whiskers, adhering to IEC 60068-2-82 and JEDEC JESD 201 standards.

The PP-H 4/ 1 BU plug is designed for applications requiring a nominal voltage of 800 V and a maximum load current of 32 A. Its push-in connection method facilitates ease of installation, with the first level connection positioned on the left. This plug supports a rated cross section of 4 mm² and is compatible with conductor cross-sections ranging from 0.2 mm² to 6 mm².Manufactured in Poland, this component is equipped to operate under the stringent requirements of the railway industry. It adheres to IEC 61984 standards, allowing for connection and disconnection under load conditions. The plug features a compact design with a width of 6.2 mm, height of 21 mm, and depth of 42.3 mm, while its blue color conforms to RAL 5015.With a temperature tolerance ranging from -60 °C to 130 °C, the insulating material used is PA, rated for multiple fire protection categories per DIN EN 45545-2. This ensures compliance with safety standards relevant to rail vehicle applications. The plug also provides reliable performance in various humidity conditions, maintaining operation in environments with relative humidity from 20% to 90%.

The ME MAX 45 G 3-3 KMGY is a DIN rail housing characterized by a tall, vent-free structure. Its dimensions are 45.2 mm in width, 99 mm in height, and 113.65 mm in depth, and it comes in a light grey color (RAL 7035). This housing supports optional cross connections via a DIN rail connector, with a maximum of 5 positions available for cross connectors.Manufactured in Germany, this modular housing is designed without ventilation openings, necessitating a housing cover for complete assembly. The unit has a maximum of 60 positions with a pitch of 3.5 mm, accommodating connection openings for enhanced utility. It is compliant with the IEC 60529 standard, achieving an IP20 rating.Suitable for ambient temperatures ranging from -40 °C to 105 °C, the housing can handle a power dissipation of 3.8 W. The material used is PA with a flammability rating of V0 according to UL 94. The housing is designed for vertical mounting on DIN rails, ensuring stability and ease of installation.

The SACC-M12MS-6Q SH VARAN is a highly functional data connector suitable for VARAN applications. It is designed with 6 positions and features a shielded construction that ensures reliable data transmission. The connector's straight M12 plug facilitates easy integration into various systems.Constructed from nickel-plated brass, the knurl material enhances durability while maintaining a compact external cable diameter range of 4 mm to 8 mm. The connector is rated for a nominal voltage of 30 V AC and a nominal current of 2 A, making it suitable for low-power applications.The connection method utilizes insulation displacement, allowing for quick and efficient assembly. It supports a connection cross-section of 0.14 mm² to 0.34 mm² (AWG 26 to 22) and offers a tightening torque of 0.4 Nm for secure mounting.With an IP67 degree of protection, this connector is designed to withstand harsh environmental conditions, ensuring reliable performance in various applications. It operates within an ambient temperature range of -40 °C to 85 °C, making it versatile for a variety of industrial settings.

The EH 52,5-C DS/ABS GY7035 serves as the upper section of a DIN rail housing with a height of 75 mm, a width of 52.6 mm, and a depth of 36.95 mm. This component is colored in light grey (RAL 7035) and designed for practical use with connection openings available on both sides.Constructed from ABS material, this housing part has a flammability rating of HB according to UL 94 and is suitable for operating temperatures ranging from -40 °C to 80 °C, depending on power dissipation. It can withstand storage and transport temperatures between -40 °C and 55 °C, while assembly can occur at temperatures from -5 °C to 80 °C. Additionally, the housing provides a maximum ingress protection rating of IP20.With no ventilation openings, the upper housing part features a snap-in mounting type and accommodates two connection openings. This item is produced in India and is part of the EH housing series, recognized for its basic housing type.

The PTS 1,5/12-PH-5,0 is a printed circuit board connector designed for efficient connectivity in electronic applications. It accommodates a nominal cross section of 1.5 mm² and supports a nominal current of 10 A, making it suitable for a variety of circuit requirements.With a rated voltage of 400 V (III/2), this connector features a tin contact surface and a female connector type. It is structured with 12 potentials organized in a single row, providing 12 positions for connections. The pitch measures 5 mm, and the connection method utilizes a push-in spring mechanism, allowing for straightforward installation.The connector's conductor/PCB connection direction is set at 0°, and it does not include locking or mounting provisions. It is packaged in cardboard, ensuring secure delivery. This product is compliant with various standards, ensuring reliability in operation.

The PTFIX 6/18X2,5-NS35A YE distribution block is designed for efficient connectivity, allowing for bridging between blocks via the conductor shaft. It operates at a nominal voltage of 690 V and supports a nominal current of 24 A.Connection is achieved through a push-in method, accommodating a cross section range of 0.14 mm² to 4 mm² for load contacts, while the rated cross section is specified at 6 mm². The mounting type is compatible with NS 35/7.5 and NS 35/15 standards, and the unit is finished in yellow (RAL 1018).This block is engineered to support various applications, featuring a maximum total current of 57 A when using a 10 mm² conductor cross-section. It includes 19 connections and is designed for a degree of pollution rating of 3, overvoltage category III, ensuring reliable performance in demanding environments.Furthermore, it meets several industry standards, including IEC 60947-7-1, and offers a wide operational temperature range of -60 °C to 110 °C. For enhanced safety, the block also adheres to flammability ratings according to UL 94 and fire protection standards for rail vehicles.

The 1.5 mm² PCB Connector, designated as FMC 1,5/18-ST-3,81, features a green housing and is suitable for various applications requiring reliable electrical connections. It supports a nominal current of 8 A and a rated voltage of 160 V, ensuring compatibility with standard electronic systems.This connector utilizes a push-in spring connection method, allowing for efficient and secure wiring without the need for additional mounting or locking mechanisms. With 18 positions arranged in a single row, it is designed to accommodate multiple potentials in compact spaces.Manufactured in Germany, this connector is compliant with WEEE/RoHS regulations and is free of whiskers according to IEC standards. Its contact surface is hot-dip tin-plated, providing enhanced conductivity and corrosion resistance. The connector’s specifications include a contact resistance of 1.5 mΩ and a glow wire flammability index of V0, indicating its robustness in demanding environments.In terms of dimensions, it measures 69.02 mm in width, 7.75 mm in height, and 21.9 mm in length, making it suitable for various PCB layouts. The insulation material used is PBT, with a comparative tracking index of 600, ensuring safety and durability under operational conditions.

Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, Rated cross section: 2.5 mm², cross section: 0.14 mm² - 4 mm², mounting type: NS 35/7,5, NS 35/15, color: gray

The IB IL AO 2/UI-XC-PAC is an Inline analog output terminal characterized by its dual analog outputs, allowing for versatile signal transmission within the ranges of 0 V to 10 V, -10 V to 10 V, and 0 mA to 20 mA, among others. This device employs a 2-conductor connection technology and operates at a transmission speed of 500 kbps, making it suitable for fast data processing.Its construction adheres to the extreme conditions version specifications, providing a degree of protection rated at IP20. With a compact design measuring 12.2 mm in width, 119.8 mm in height, and 71.5 mm in depth, this terminal is optimized for industrial applications. The device operates within a temperature range of -25 °C to 55 °C and can withstand various environmental factors, including humidity levels from 10% to 95% (non-condensing).Designed for DIN rail mounting, the terminal integrates seamlessly with existing systems, utilizing spring-cage connection methods for secure wiring. The D/A conversion time is typically 10 µs with a resolution of 12 bits, ensuring precise output signal representation. Notably, the product includes an Inline connector and a labeling field to facilitate installation and identification.In terms of safety and reliability, the terminal features short-circuit and overload protection, alongside diagnostics for internal I/O supply failures communicated to the bus coupler. This product is intended for industrial use only and conforms to several international standards, ensuring compatibility and performance in demanding environments.

The MINI MCR-2-UI-FRO-PT is an analog frequency transducer that facilitates the conversion of standard signals into either frequency or PWM signals. It is equipped with limit value functionality and utilizes plug-in connection technology for enhanced versatility.This device can be configured easily through DIP switches or software, allowing for tailored operation to meet specific requirements. The device supports a nominal supply voltage of 24 V DC with a range of 9.6 V DC to 30 V DC, ensuring compatibility with various systems. It features a frequency output range of 0 Hz to 10 kHz and a PWM output signal of 15.6 kHz with 10-bit resolution.In terms of electrical isolation, the transducer offers 4-way isolation between input and output, ensuring safety and reliability during operation. The maximum transmission error is less than 0.2% for PWM frequencies up to 500 Hz, providing precision in signal conversion. It is also designed for a wide ambient temperature range from -40 °C to 70 °C, making it suitable for demanding environments.Additionally, the device adheres to multiple standards including GB 3836.1, and is classified under EMC class A. Its robust construction includes a housing made of PBT, with a degree of protection rated at IP20. The MINI MCR-2-UI-FRO-PT is intended for DIN rail mounting, facilitating straightforward installation in a variety of applications.

The ELR H5-IES-SC-230AC/500AC-9 serves as a hybrid motor starter specifically engineered for reversing three-phase AC motors, accommodating voltages up to 500 V AC and output currents reaching 9 A. It operates with a control voltage of 230 V AC and integrates an adjustable overload shutdown mechanism. With a maximum power dissipation of 16.1 W and a rated insulation voltage of 500 V, this device ensures reliable performance in varied operating environments. It supports a mains frequency of both 50 and 60 Hz, with a rated control supply current of 4 mA. The hybrid starter features safe isolation characteristics in accordance with IEC standards, effectively safeguarding the control input from the main circuit. Operating within a temperature range of -25 °C to 70 °C, this model is suitable for diverse industrial applications. It also includes LED indicators for operational status and error indication, enhancing usability. The connection method utilizes a screw connection with a conductor cross-section accommodating both rigid and flexible wires between 0.2 mm² to 2.5 mm². For installation, the unit is designed for DIN rail mounting, ensuring a compact form factor with dimensions of 22.5 mm in width, 107 mm in height, and 114 mm in depth. The device has a flammability rating of V0 according to UL 94, and it meets stringent safety standards, making it suitable for various industrial applications.

The Extension Module PSR-M-EF5-SDO4-2A-DO8-PI is designed for safe shutdown applications, providing 4 safe outputs rated at 2 A, 4 reset inputs, and 8 signal outputs. This module supports a TBUS interface for seamless connection to the master module, ensuring reliable communication. It meets stringent safety standards with a Safety Integrity Level (SIL) of 3 and performance level e in a 2-channel configuration.Constructed for industrial environments, the module features a pluggable Push-in terminal block and includes a TBUS connector. The input voltage ranges from 0 V DC to 5 V DC for '0' signals and 11 V DC to 28.8 V DC for '1' signals, with a typical input current of less than 1 mA. The output section operates with a nominal voltage of 24 V DC, supporting a maximum load of 100 mA per channel and short-circuit protection through self-limitation at 1.1 A.In terms of environmental specifications, the module can operate within a temperature range of -10 °C to 55 °C and is rated for IP20 protection, suitable for indoor use with a minimum installation location protection of IP54. The module's dimensions are 22.61 mm in width, 107.74 mm in height, and 113.6 mm in depth, weighing 178 g including packaging. The Designation Code for this product is PSR-M-EF5-SDO4-2A-DO8-PI.

The MACX MCR-SL-RPSS-2I-2I serves as a 2-channel repeater power supply specifically designed for 2-conductor measuring transducers. It features an input range of 4 ... 20 mA for supplying and an active output of 4 ... 20 mA. The device facilitates bidirectional signal transmission while ensuring HART transparency.Designed with operational resilience in mind, it maintains electrical isolation between input and output, allowing for secure signal processing. The step response is notably swift, achieving less than 1.3 ms for a 4 mA to 20 mA transition. Additionally, the transmission error is kept minimal, typically below 0.05% of the final value at 20 mA.Constructed for durability, the product meets various standards including EN 61000-6-4, and operates effectively within an ambient temperature range of -40 °C to 42 °C. It is equipped with a screw connection method, accommodating conductor cross-sections from 0.2 mm² to 2.5 mm². The device's compact dimensions, measuring 12.5 mm in width, 112.5 mm in height, and 113.7 mm in depth, allow for easy integration into existing setups.

The MACX MCR-SL-2NAM-T serves as a 2-channel signal conditioner specifically for NAMUR proximity sensors and switches. It effectively transmits signals to the control level using passive transistor outputs while ensuring 3-way electrical isolation and line fault detection.With an operational voltage range of 19.2 V DC to 30 V DC, it is capable of handling a maximum current consumption of 34 mA. The device operates efficiently within an ambient temperature range of -40 °C to 42 °C and is designed to withstand an overvoltage category of II. It features a switching frequency of up to 5 kHz and supports a maximum switching current of 50 mA, making it suitable for various industrial applications.This product is classified under Safety Integrity Level SIL 2 and conforms to multiple standards, including EN 61326 for electromagnetic compatibility. The device is constructed with a housing made of PA 6.6-FR, achieving a flammability rating of V0 according to UL 94. The unit measures 12.5 mm in width, 112.5 mm in height, and 113.7 mm in depth, making it suitable for DIN rail mounting.

The Phoenix Contact FL SWITCH 2308 PN is a high-performance managed switch designed for industrial applications. With 8 RJ45 ports, it supports data transmission speeds of up to 10/100/1000 Mbps, ensuring reliable and efficient communication in demanding environments. Technical Specifications: PROFINET Conformance-Class B compliant Preset PROFINET mode for seamless integration with PROFINET devices Status LEDs to monitor the switch's operational status