PLCs Siemens

SINAMICS g120 power module pm240-2 without filter with built in braking chopper 3AC500-690v +10/-20% 47-63HZ output high overload 7.5KW for 200% 3s,150% 57s,100% 240s ambient temp -20 to +50 deg c…

The SIMATIC S7-300 Digital Output Module SM 322 is an optically isolated device designed for industrial automation applications. It offers 8 digital outputs (relay), which can be controlled via a 1x…

SIMATIC DP, Electronics module for ET 200S, 1 count 24 V/100 kHz 15 mm installation width, operating modes: Count, Measure, (cycle duration measurement, high-resolution) with clock synchronization

The SIMATIC S7-300 Digital Output Module is a robust solution designed for industrial automation applications. It features an optically isolated design, ensuring reliable and secure communication…

The SIMATIC ET 200SP Digital Output Module, model DQ 4x24..230VAC/2A, is a versatile and reliable component designed for industrial automation systems. This module is compatible with BU type B1 and…

The SIMATIC s7-300 interface module IM 360 is designed to be installed in a central rack, allowing for the connection of up to three expansion racks. This module features a K-bus for efficient…

The SIMATIC PC power cable is a high-quality AC IEC cable designed for use in Germany, France, Spain, The Netherlands, Belgium, Sweden, Austria, and Finland. This cable features a 90° male to 180°…

Fail-safe digital module dm-f profisafe for fail-safe switch-off via bus / profisafe uv 24 V DC, 2 relay enabling circuits 2 relay outputs 3 outputs max. err. sil (iec 61508) 3 max. err. pl (iso…

The Siemens MODULE INPUT S7300 8AI 16BIT 40PIN ISO is a robust and versatile analog input module designed for the SIMATIC S7-300 series. This module provides 8 isolated analog inputs with a…

SIPLUS WP321 -40 ... +60°C with conformal coating based on 7MH4138-6AA00-0BA0. WEIGHING ELECTRONIC (1 CHANNEL) for STRAIN GAUGE LOAD CELLS FULL BRIDGES (1-4 mV/V) for SIMATIC ET200SP. fits to BU-TYPE…

The SIMATIC ET 200SP BaseUnit BU15-P16+A0+2B/T is designed to provide robust and efficient connectivity for your automation systems. This BaseUnit, type A1, features push-in terminals and is bridged…

The Siemens S7 Micro Memory Card with a capacity of 512KB is designed for use with SIMATIC S7-300, C7, and ET 200 systems. This memory card ensures reliable and efficient data storage and retrieval…

SIMATIC WinCC Advanced V17 Upgrade: Enhance your SIMATIC WinCC Advanced software from versions 11 to 16 to version 17 or from the combo of versions 11 to 16 to version 17. This engineering tool is…

The Optical Link Module PROFIBUS OLM/G12 V4.0 is a cutting-edge communication module designed for effortless integration into PROFIBUS networks. It boasts 1 RS 485 and 2 glass FOC interfaces (4 BFOC…

The SIMATIC DP Electronics Module 2AO U High Feature is designed for use in the ET 200S system. This module boasts a width of 15 mm and offers a cycle time per module of just 0.5 ms. It supports both…

SIMATIC S7-300, ANALOG INPUT SM 331, GALVANICALLY ISOLATED, 8 AI, 14 BIT, 0.052MS/CHANNEL, CURRENT, VOLTAGE, INTERRUPTS, DIAGNOSTICS,1 X 20 PIN, FIT FOR ISOCHRONE MODE IMPROVED DP-CYCLE TIME FOR…

The SIMATIC S7-300 Communication Processor, model CP341, is a robust and versatile device designed for industrial automation applications. It features an RS422/485 interface, enabling seamless…

SIMATIC PN/PN Coupler for deterministic data exchange between max.4 PN-Controller per subnet. also from subnet to subnet. I/O-. MSI-. MSO- and data record communication. redundant power supply…

The SIMATIC DP series offers five electronic modules designed specifically for the ET 200S system, providing reliable and efficient performance in industrial automation applications. Key Features…

The Siemens CSM 1277 Compact Switch Module is designed for efficient industrial networking. It allows users to connect their SIMATIC S7-1200 system and up to three additional nodes to Industrial…