Automation Sensors

The Turck Inductive Sensor, Model BI20-CP40-Y1X, is designed for precise and reliable operation. This sensor features a flush rectangular design with a height of 40 mm, allowing it to be easily integrated into various applications. With its variable orientation of the active face in nine directions, this sensor provides flexibility in installation. The high-luminance corner LEDs ensure optimal visibility of operating voltage and switching state from any position. The sensor is rated for a switching distance of 20 mm, ensuring large coverage. It operates on DC 2-wire with a nominal voltage of 8.2 VDC, complying with DIN EN 60947-5-6 (NAMUR) standards. The sensor is equipped with a terminal chamber and is certified for ATEX category II 2 G, Ex zone 1, ATEX category II 1 D, Ex zone 20. It meets SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, and SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1.

The Omron EE-SX953P-W 1M Photo Micro Sensor is an ultra-compact, pre-wired photomicrosensor designed for precise detection in tight spaces. Featuring a slot-type, through-beam sensing method, this sensor provides reliable performance with a sensing distance of 5 mm. The sensor operates in both Dark-ON and Light-ON modes, offering flexibility for various applications.Constructed with a durable PBT housing and equipped with a 1-meter cable, the EE-SX953P-W ensures easy installation and long-lasting operation. The infrared LED light source, with a peak wavelength of 940 nm, guarantees accurate detection of opaque objects as small as 1.8 x 0.8 mm. The sensor's fast response time of 0.5 ms and high response frequency of 1 kHz make it suitable for high-speed applications.With an operating temperature range of -25 to 55°C and IP50 protection, the EE-SX953P-W is built to withstand harsh industrial environments. The sensor also includes output short-circuit protection, ensuring safe and reliable operation. Ideal for use in automation systems, packaging machinery, and assembly lines, this sensor delivers exceptional performance and reliability.

SMC offers a variety of auto switches for actuators and air grippers. Reed and solid state switches are available in a general purpose type or with 2-color indication, which allows the optimum operating position to be determined by the color of the light. Solid state switches are also available in 2-color indication with diagnostic output, water resistant 2-color indication, built-in OFF-delay timer (200 ms), magnetic field resistant, heat resistant and wide range detection configurations. Various lead wire lengths are available.

The Wenglor B50S001 Vision Sensor is a state-of-the-art vision sensor based on the advanced wenglor MultiCore technology. This sensor is designed to provide optimal object detection through its key features such as autofocus, region of interest, and tracking. The integrated color image chip ensures that all image processing functions are available for remote applications, making it a versatile tool for various industrial applications.Key Features:Autofocus for precise image captureRegion of interest for targeted detectionTracking for dynamic object monitoringDimensional accuracy checkSorting proceduresPresence controlObject countingPosition outputPixel countingFilter optionsStatistics evaluationApplications:The Wenglor B50S001 Vision Sensor is ideal for applications requiring high precision and reliability in object detection. It is perfect for use in manufacturing, quality control, and automation processes where accurate image processing is crucial.

The Keyence LV-H62 Retro-reflective Sensor Head is designed for high-precision detection applications. Featuring a small beam spot, this sensor head ensures accurate and reliable performance in various industrial environments. The visible red semiconductor laser with a wavelength of 660 nm provides clear and consistent detection over distances of up to 7 meters, depending on the mode selected (FINE, TURBO, SUPER).Constructed with a glass-reinforced plastic case and a transparent plastic lens cover, the LV-H62 is built to withstand challenging conditions. The sensor head is compliant with FDA (CDRH) Part 1040.10 Class II standards, ensuring safety and reliability. Its compact and lightweight design, weighing approximately 45 grams, makes it easy to integrate into existing systems.Ideal for use in various industrial applications, the LV-H62 offers exceptional environmental resistance, operating effectively in temperatures ranging from -10 to +55 °C. This sensor head is perfect for tasks requiring precise detection, such as in automated manufacturing processes, quality control, and material handling systems.

The Wenglor P1KL006 is a high-performance photoelectric sensor designed for industrial automation applications. Its robust construction and long sensing range of up to 600mm make it suitable for use in harsh environments such as factories and warehouses.The P1KL006 features advanced technology, including a high-speed response time of just 0.25ms and a high switching frequency of 1kHz, ensuring that it can detect even the fastest-moving objects with ease. It also has a built-in amplifier for reliable signal processing and protection against interference.Installation is straightforward with a simple mounting system and a range of connection options, including M8 and M12 connectors. This sensor is highly configurable, with adjustable sensitivity and a variety of output options, making it a versatile solution for a wide range of applications.Overall, the Wenglor P1KL006 delivers outstanding performance and reliability in industrial automation environments.

The SICK WSU26/3-103A00 Safety Single-Beam Sensor is a robust and reliable solution for industrial safety applications. Utilizing infrared light, this sensor offers a scanning range of up to 70 meters, ensuring precise and dependable detection. Designed with a single beam, it is ideal for applications requiring high safety standards.This sensor is equipped with optical synchronization and front screen heating, enhancing its performance in various environmental conditions. It meets SIL 3 (IEC 61508) and PL e (EN ISO 13849) safety integrity levels, making it suitable for critical safety applications. The sensor's aluminum die-cast housing and polycarbonate front screen with a scratch-resistant coating ensure durability and longevity.With an IP67 protection rating, the WSU26/3-103A00 is resistant to dust and water, making it suitable for harsh industrial environments. It operates efficiently within a temperature range of -25°C to +55°C and can withstand vibrations and shocks as per IEC standards.Installation is straightforward with a PG gland connection type, and the sensor features LED display elements for easy status monitoring. The WSU26/3-103A00 complies with various international standards, including the EU, UK, ACMA, and China RoHS declarations of conformity.Applications for this sensor include safeguarding machinery, protecting hazardous areas, and ensuring personnel safety in industrial settings. Its high performance and compliance with stringent safety standards make it an excellent choice for engineers and integrators seeking reliable safety solutions.

The Keyence GL-R40H Safety Light Curtain is designed to provide superior protection and detection capabilities in industrial environments. With a detection height of 780 mm and protection height of 825 mm, it ensures comprehensive coverage for safety applications. The unit features 40 optical axes with a beam pitch of 20 mm, allowing for precise detection of objects as small as ø25 mm.Utilizing infrared LED light sources, the GL-R40H offers a detection range of 0.2 to 15 meters, making it suitable for various applications. The effective beam angle of up to ±2.5° ensures reliable performance even at extended distances. The unit supports both optical and wired synchronization, enhancing flexibility in installation and operation.The GL-R40H is equipped with advanced interference prevention functions, capable of mitigating mutual interference between up to two systems. It features dual transistor outputs (PNP or NPN) with a maximum load current of 500 mA, ensuring robust and reliable signal transmission. The unit also includes auxiliary outputs and error outputs for enhanced monitoring and control.Designed to meet stringent safety standards, the GL-R40H complies with IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE), IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD), IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3), and EN ISO13849-1:2015 (Category 4, PL e). It also adheres to EMC and EMI standards, ensuring reliable operation in various industrial settings.The unit boasts an IP65/IP67 protection rating, making it resistant to dust and water ingress. It operates effectively in temperatures ranging from -10 to +55°C and can withstand vibrations and shocks, ensuring durability in harsh environments. The GL-R40H is constructed with a robust aluminum housing and features nylon and polycarbonate components for added strength.

The EH-308 Sensor Head is a high-performance, shielded cylindrical sensor designed for detecting ferrous metals. With a stable detecting range of 0 to 2 mm and a maximum detecting distance of 5 mm, it ensures precise and reliable operation in various industrial environments. The sensor features IP67 protection, making it suitable for use in harsh conditions with exposure to dust and water. Its robust design includes a repeatability of 0.005 mm and minimal hysteresis of 0.04 mm, ensuring consistent performance. The EH-308 is compliant with CE Marking and UL Recognition, meeting stringent international standards. Ideal for applications requiring accurate metal detection, this sensor is built to withstand ambient temperatures from -10 to +60°C and relative humidity levels of 35 to 85% RH without condensation.

PM3255 DIN mount energy meter with a 128 by 96 pixel backlit, LCD display. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 32 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor, Apparent Power, Total Harmonic Distortion and up to 15th Harmonic. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 277VAC, 173 to 480VAC and 100 to 300VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase, Single Phase and Neutral or Three Phase configurations. Direct measurement range is 50 to 570VAC, with an external VT 570 to 999000VAC. The range of measurement voltage between Phases is 80 to 570VAC at 45 to 65 Hz. Measurement range between Phase and Neutral is 50 to 330VAC at 45 to 65 Hz. Communication protocol is Modbus RTU and ASCII 2 wires with RS485 port support. Support for two digital input and two digital outputs. The meter offers 512kB of memory for event recording with up to 15 alarms with power and energy consumption logs. Product dimensions are as follows: width 3.54 in (90 mm), depth 2.76in (70 mm), height 3.74 in (95 mm) and product weight 9.17 oz (260 g).

The SmartX sensor family provides environmental monitoring solutions compatible with SmartX IP controllers, operating within the EcoStruxure Building Operation software environment. These sensors leverage a standardized RJ-45 Sensor Bus architecture to facilitate both data transmission and power delivery directly from the controller. This particular base unit is provided without an enclosure and incorporates temperature and CO2 sensing elements for comprehensive environmental assessment.

The Omron E3T-ST14 2M Ultracompact Photoelectric Sensor is designed for high precision and reliability in industrial automation applications. This through-beam type sensor features a built-in amplifier and offers a sensing distance of up to 1 meter. The sensor utilizes a red LED light source (650 nm) and is equipped with a PNP open collector output, making it suitable for various detection tasks.With its ultracompact and ultrathin design, the E3T-ST14 2M is ideal for installations where space is limited. The sensor's pre-wired model ensures easy and secure connections, while the M2 mounting allows for straightforward installation. The sensor operates in Dark-ON mode and includes protective circuits such as output short-cut protection, output reverse polarity protection, and power supply reverse polarity protection.Engineered to withstand harsh environments, the E3T-ST14 2M features a robust polybutylene terephthalate (PBT) case and denatured polyarylate lens. It offers high resistance to vibration and shock, ensuring reliable performance even in demanding conditions. The sensor is also equipped with operation and stability indicators for easy status monitoring.Applications for the E3T-ST14 2M include object detection, positioning, and counting in various industrial settings, such as manufacturing lines, packaging, and material handling systems. Its high ambient light immunity and wide operating temperature range make it suitable for diverse environments.

Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. push-in connection technology, order configuration

Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

The Precision Proximity Sensor by Balluff is designed for high-accuracy position detection in industrial automation applications. This sensor operates on the principle of magnets for BTL profile transducers, ensuring reliable and precise measurements. The sensor is constructed from durable POM material, making it suitable for harsh environments. With a compact design of 37.6 x 14 x 20 mm, it can be easily integrated into various systems.One of the key benefits of this sensor is its ability to function in a wide temperature range of -40 to 85 °C, providing versatility across different industrial settings. The sensor's minimum distance from the BTL is 0.1 mm, and it can operate effectively up to a maximum distance of 4 mm. This flexibility allows for precise control and monitoring in various applications.Manufactured by Balluff GmbH, a leader in sensor technology, this proximity sensor ensures high performance and reliability. It is ideal for use in automation systems where precise position detection is critical.

SIMATIC MV540 H optical reader Resolution: 1280 x 1024 pixels; Function: 1D/2D code reading; Image field and distance: variable. (ABH lens object); PoE; IP67 with 6GF3540-8AC11; Delivery: Reader and SD card adapter

The Keyence IV-G500CA Standard Sensor Head is a versatile and high-performance sensor designed for precise industrial applications. Featuring a 1/3 inch color CMOS image sensor, this sensor head provides exceptional image quality with a pixel resolution of 752 (H) x 480 (V). The automatic focus adjustment ensures optimal performance across a wide range of installed distances from 20 mm to 500 mm, making it suitable for various inspection tasks.Equipped with a white LED illumination system, the IV-G500CA offers both pulse and DC lighting methods, allowing for flexible lighting control to suit different environments. The sensor head is built to withstand harsh industrial conditions with an IP67 enclosure rating, ensuring protection against dust and water ingress. It operates reliably within a temperature range of 0 to +50 °C and a relative humidity of 35 to 85 % RH.The robust construction includes a zinc die-casting main unit case, an acrylic front cover with a hard coat, and a TPU operation indicator cover. The sensor head is designed to endure vibrations of 10 to 55 Hz with a double amplitude of 1.5 mm and shocks of 500 m/s², ensuring durability in demanding environments.With its advanced features and rugged design, the Keyence IV-G500CA Standard Sensor Head is an ideal choice for applications requiring precise color detection and reliable performance in challenging industrial settings.

The Omron E3X-DA41-S Fiber Optic Amplifier Sensor is designed for high precision and reliable detection in various industrial applications. This sensor features a PNP output configuration, ensuring compatibility with a wide range of control systems. The IP50 protection rating provides adequate protection against dust ingress, making it suitable for use in less demanding environments.With its versatile sensor modes including DARK-ON and LIGHT-ON, the E3X-DA41-S offers flexibility in operation, adapting to different detection requirements. The sensor operates efficiently within a temperature range of -25 to 55°C, ensuring reliable performance in diverse conditions.The 2-meter cable connection allows for easy installation and integration into existing systems. The sensor is powered by a 12 to 24V DC supply, making it compatible with standard industrial power sources. Its robust design and reliable performance make it an ideal choice for applications requiring precise and consistent detection.Applications include assembly lines, packaging machinery, and automated inspection systems where accurate detection is crucial. The Omron E3X-DA41-S Fiber Optic Amplifier Sensor is engineered to meet the demands of modern industrial environments, providing dependable operation and ease of use.

The Carlo Gavazzi CA18CLN12PA Capacitive Proximity Sensor is designed for accurate and reliable detection of objects within a 12 mm range. This sensor operates on a supply voltage of 10 to 40 VDC and can handle a maximum switching current of 200 mA. With a switching frequency of 30 Hz, it is suitable for a wide range of industrial automation applications.Constructed with a robust thermoplastic polyester housing, the CA18CLN12PA is built to withstand harsh environments. It features an IP67 protection rating, ensuring it is dust-tight and protected against temporary immersion in water. The sensor is equipped with an LED indicator for easy status monitoring.The CA18CLN12PA is a non-flush, unshielded sensor with a 2-meter cable termination, making it versatile for various installation requirements. It operates reliably within a temperature range of -25°C to 80°C, ensuring consistent performance in diverse conditions. This sensor complies with UL Listed and CSA Certified standards, guaranteeing high safety and quality.Applications for the CA18CLN12PA include material handling, packaging, and automation systems where precise object detection is crucial.

The Proximity sensor SMT-8M-A-PS-24V-E-5,0-OE from Festo is designed for accurate position detection in industrial automation applications. Featuring a magneto-resistive measuring principle, this sensor ensures high reliability and precision. It is built to fit T-slots and complies with EN 60947-5-2 standards, ensuring compatibility and safety in various environments.With a wide DC operating voltage range of 5 V to 30 V and a PNP switching output, this sensor is versatile and easy to integrate into existing systems. The sensor's robust design includes a high-alloy stainless steel housing, making it durable and suitable for harsh conditions. It also features IP65, IP68, and IP69K protection, ensuring resistance to dust and water ingress.The SMT-8M-A-PS-24V-E-5,0-OE is equipped with a 5-meter cable suitable for energy chains and robot applications, providing flexibility in installation. The sensor's LED indicators for switching status and function reserve make it easy to monitor and maintain. Additionally, it is RoHS-compliant and halogen-free, meeting environmental and safety standards.This sensor is ideal for applications requiring precise position detection, such as in automated assembly lines, packaging machinery, and robotics. Its high repetition accuracy and fast switching times ensure optimal performance in dynamic environments.