Automation Sensors

Inductive Sensor, Rated switching distance 8 mm, Non-flush, M12 × 1 threaded barrel, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

The BI4-M12-AP6X-H1141 Inductive Sensor is designed for enhanced switching distance. It features a rated switching distance of 4 mm and a flush M12 × 1 threaded barrel, crafted from chrome-plated brass. This sensor boasts a large sensing range and operates on DC 3-wire at voltages between 10 and 30 VDC. It offers NO contact with PNP output, all encapsulated in an M12 x 1 male connector.

SMC offers a variety of auto switches for actuators and air grippers. Reed and solid state switches are available in a general purpose type or with 2-color indication, which allows the optimum operating position to be determined by the color of the light. Solid state switches are also available in 2-color indication with diagnostic output, water resistant 2-color indication, built-in OFF-delay timer (200 ms), magnetic field resistant, heat resistant and wide range detection configurations. Various lead wire lengths are available.

The Turck BI8-M18-AP6X-H1141 Inductive Sensor is designed with enhanced switching capabilities, providing a rated switching distance of up to 8 mm. This sensor features a flush, threaded barrel with an M18 x 1 thread and a chrome-plated brass construction for durability. It offers a large sensing range and is compatible with DC 3-wire systems operating at voltages between 10 and 30 VDC. The sensor provides NO contact, PNP output, and is equipped with an M12 x 1 male connector for easy integration into your system.

The WIKA S-11 Pressure Transmitter - 9023577 is a high-performance electronic pressure transmitter designed for a wide range of industrial applications. With a pressure measurement range of 0 to 400 bar, this transmitter provides accurate and reliable pressure readings, making it suitable for use in mechanical engineering, pumps, compressors, and various pneumatic and hydraulic systems.The transmitter features a robust G 1/2 B process connection with an integrated O-ring seal, ensuring a secure and leak-free installation. The electrical connection is made via a type A angular connector, which is compliant with IP65 protection standards, offering excellent resistance to dust and water ingress.One of the key benefits of the WIKA S-11 is its 4-20 mA analog output, which provides a reliable and standardized signal for easy integration with control systems and monitoring equipment. The transmitter operates with a supply voltage range of 10 to 30 V DC, ensuring compatibility with various power sources.Constructed from high-quality stainless steel (CrNi), the WIKA S-11 is built to withstand harsh industrial environments. The NBR sealing material further enhances its durability and longevity. The transmitter is designed to operate within a wide temperature range, from -20°C to 80°C for ambient conditions and -30°C to 100°C for process temperatures.With its compact design and high accuracy of

The Turck BI2-EG08-AP6X-V1131 is an advanced inductive switch designed to provide enhanced performance and versatility. This switch boasts a rated switching distance of 2 mm, making it ideal for applications requiring precise positioning or increased range. Constructed with a flush M8 × 1 threaded barrel and crafted from stainless steel (AISI 303), this switch is built to withstand the rigors of industrial environments. Its large sensing range ensures reliable operation, even in challenging conditions. The BI2-EG08-AP6X-V1131 operates on a DC 3-wire system, offering voltage compatibility between 10 and 30 VDC. It provides NO contact output with PNP polarity, ensuring seamless integration into various control systems. The switch features an M8 x 1 male connector for easy installation and maintenance. This model is a testament to Turck's commitment to delivering high-quality, reliable industrial solutions that meet the evolving needs of modern automation systems.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

The Aeco Magnetic Reed Sensor M-20 is a high-quality sensor designed for precise and reliable detection in industrial environments. This sensor features a robust plastoferrite magnet and is built to withstand a wide range of temperatures, making it suitable for various applications.Key Features:Durable plastoferrite magnetWide temperature range: -25 ÷ +100 °CCompact mechanical design: Ø 20x10Lightweight: 50 gPerfect for:Industrial automationSecurity systemsPosition sensing

The Keyence AP-C33WP is a high-precision positive-pressure sensor designed for industrial applications requiring accurate pressure monitoring. This main unit features a robust design capable of handling pressures up to 1 MPa, making it suitable for various demanding environments. The sensor supports air or non-corrosive gases and provides gauge pressure readings.Equipped with a 3 1/2-digit, 2-color, 7-segment LED display, the AP-C33WP ensures clear and immediate pressure readings with a display cycle of 10 times per second. The operation indicators include two red LEDs corresponding to control outputs 1 and 2, enhancing operational visibility. The display resolution is adjustable between normal mode (0.001 MPa) and focus mode (0.1 kPa).The unit offers versatile power consumption options, operating efficiently in both normal and eco modes. It also features a variable hysteresis standard of 0.5% of full scale, ensuring precise control. The response time is selectable, ranging from 2.5 ms to 500 ms, to suit different application needs.For output, the AP-C33WP provides a PNP open collector with a maximum load of 100 mA at 30 V or below, and two outputs that can be configured as normally open (NO) or normally closed (NC). The pressure port is designed with Rc (PT) 1/8 180° rotation for flexible installation.Built to withstand harsh conditions, the sensor features a durable construction with a polysulfone front housing, PBT rear housing, polycarbonate front seat, and zinc die-casting pressure port. It is resistant to vibrations and operates reliably within a temperature range of 0 to +50°C and relative humidity of 35 to 85% RH.Applications include monitoring and control in pneumatic systems, automation equipment, and other industrial processes where precise pressure measurement is critical.

The SIMATIC RF600 Reader RF650R FCC is a robust UHF reader designed for industrial automation applications. It operates within the frequency band of 902-928 MHz, ensuring reliable communication. The device features multiple interfaces including Ethernet RJ45, four antennas, and four digital inputs/outputs, providing versatile connectivity options.Powered by a 24V DC supply, the RF650R is built to withstand harsh environments, boasting an IP30 rating. Its temperature range spans from -25°C to +55°C, making it suitable for various industrial settings. It's important to note that this product is sold without accessories and antennas.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

The inductive standard sensors are specifically designed for effective object detection in metal applications. With a compact dimension of Ø 3 x 27 mm, these sensors are suited for flush mounting and exhibit a sensing range of 1 mm. They utilize a PNP Normally Open (NO) switching output and operate at a switching frequency of 3500 Hz.Constructed from durable stainless steel, the sensors are engineered for resistance against dirt and contamination, ensuring reliable performance in challenging environments. The sensing surface is made of PBT, contributing to its robust design. These sensors operate within a voltage range of 10-30 VDC and can function effectively in ambient temperatures ranging from -25 °C to 70 °C. The IP67 rating guarantees protection against dust and water ingress.These inductive sensors are also recognized for their compliance with various standards, including cULus, CE, EAC, and WEEE. The product is available in multiple configurations, with over 500 preferred types accessible globally, ensuring rapid delivery to meet diverse application needs.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Sensor/actuator box, application: Standard, connection method: M8 socket Metal, number of slots: 4, number of positions: 3, coding: A - standard, slot assignment: single, status display: yes, pnp; master cable connection: M12 plug connection 90°, shielding: no

The Orion1 Base Light Curtain is designed to provide enhanced safety in industrial environments. This system combines a transmitter and receiver unit with a resolution of 14mm and a protected height of 1050mm.With a range of 0.2-6m, this light curtain is ideal for Type 4 applications where precision and reliability are paramount. It ensures that any obstruction within the defined area is detected promptly, thereby preventing potential hazards.

Our inductive standard sensors are designed to detect objects in metal areas. They are short-circuit protected and operate without contact, ensuring they are wear-free and highly resistant to dirt and contamination. These sensors are available in a range of configurations from 3 mm Ø to 80 × 80 mm square dimensions.The rugged and reliable inductive Global Sensors provide economical solutions for various applications. We offer a broad range of these over 500 preferred types worldwide, ensuring quick delivery times.