Connectivity

The Leviton 30 Amp, 347/600 Volt 3PY, NEMA L23-30R, 4P, 5W, Flush Mount Locking Receptacle is designed for industrial-grade applications, providing unmatched flexibility and dependability. Built to withstand the most severe industrial environments, this locking receptacle combines high-quality materials with superior production standards. It features a robust nylon body and Valox 357 cover for enhanced durability. The device supports back and side wiring and is rated for use in corrosive environments. It is also flame-retardant per UL 94 V-0 standards. The receptacle is designed to handle a maximum temperature rise of 30°C after 250 cycles at 200% rated current, ensuring reliable performance. This product is compliant with ANSI C-73, CSA C22.2 No. 42, NEMA WD-1 & WD-6, NOM 057, and UL 498 standards, making it a trusted choice for demanding industrial applications.

The IFM E70188 Tap AS-i/24V M12 4A is designed to provide reliable and efficient connectivity for AS-i and external voltage applications. Featuring M12 sockets, this tap ensures robust and secure connections, making it ideal for industrial automation environments. The electrical design supports AS-i / 24 V with an operating voltage range of 26.5 to 31.6 DC (AS-i) and 24 DC, ensuring compatibility with a wide range of systems. With a maximum current load capacity of 4000 mA per module, it is capable of handling high power requirements.Constructed with durable materials, including PA 6.6 for the housing and stainless steel 316L / 1.4404 for the socket housing and screws, this tap offers excellent resistance to environmental factors. The IP65 protection rating ensures reliable performance in harsh conditions, with an ambient temperature range of -25 to 75°C. The inclusion of an NBR O-ring in the socket further enhances its durability and sealing capabilities.The electrical connection is straightforward, with clearly marked wiring terminals for AS-i +, 0V, AS-i -, +24V, and Protective Earth (PE). This ensures easy and error-free installation. The compact design, with a weight of just 0.112 kg, makes it easy to integrate into existing systems without adding significant bulk.Note: This product is no longer available and has been archived. For alternative options, please refer to the E70588 model. Be aware that technical data may differ between models.

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.

Series AN silencers offer various styles and low back pressure in a compact, easy mounting design. The noise reduction has been improved to 30 dB(A) and the case is UL94-V0 grade, flame resistant material. Series AN is available with M, R or NPT threads.

The Han EE module is designed for crimp termination, offering a female connector with 8 contacts. It accommodates conductors with a cross-section ranging from 0.14 to 4 mm² and is rated for a current of up to 16 A.Constructed from polycarbonate (PC), the module boasts a sleek, pebble grey finish in RAL 7032. Its robust design ensures reliable performance under various operating conditions.

The floating joint series JA (standard) and JAH (heavy duty), can absorb any off-centering or loss of parallel accuracy between the cylinder and the driven body. Because of this, centering is unnecessary, installation time is drastically reduced, and a high level of machining accuracy is unnecessary.

Series AN silencers offer various styles and low back pressure in a compact, easy mounting design. The noise reduction has been improved to 30 dB(A) and the case is UL94-V0 grade, flame resistant material. Series AN is available with M, R or NPT threads.

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.

This product is a hood, specifically designed for size 16 B applications. It features a low construction design, which enhances its versatility and compatibility with various systems.The hood incorporates a single locking lever, providing secure and efficient operation. This feature ensures that the hood can be easily opened or closed as needed, without compromising on safety or functionality.The entry point is located on the side of the hood, which allows for convenient access during installation or maintenance. The M25 threading further facilitates this process by enabling easy connection and disconnection of cables or other components.Constructed from aluminium die-cast material and powder-coated in RAL 7037 (dust grey), the hood offers a robust and durable solution. Its degree of protection is rated at IP65, IP66, and IP67, making it suitable for use in various industrial environments.

The EL9184 potential distribution terminal provides the supply voltage via the front-side terminal contacts. 24 V and 0 V can each be tapped 8x from the front. The power contacts are connected to the front-side terminal contacts and are passed through to the adjacent terminal. With the EL9184, the use of additional terminal blocks on the terminal strip can be reduced. The HD EtherCAT Terminals (high density) with increased packing density contain 16 connection points in the housing of a 12 mm-wide EtherCAT Terminal. Solid wire conductors can be connected without tools using the direct plug-in technique.

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.

The KL9110 power feed terminal makes it possible to set up various potential groups with the standard voltage of 24 V DC. In order to monitor the supply voltage, the terminal with diagnostics reports the status of the power feed terminal to the Bus Coupler through two input bits. It is thus possible for the controller to check the distributed peripheral voltage over the fieldbus.

SIMATIC dp, 5 universal terminal modules tm-e15s26-a1 for et 200s for electronic modules 15mm wide, screw-type terminals 2x6 terminal connections with terminal lead to aux1, aux1 in line, 5 pieces per packaging unit

Introducing our Zinc Die-Cast Hood, designed to cater to the needs of size 3 A applications. This hood is equipped with a single locking lever for easy access and a side entry for convenient use. Material: The hood and housing are made from robust zinc die-cast material, ensuring durability and resistance to corrosion. It's then powder-coated in RAL 7037 (dust grey), providing a sleek and protective finish. Degree of Protection: This hood offers an impressive degree of protection, with IP44, IP65 / IP67 ratings. It also comes with a seal screw 09 20 000 9918 for added security.

The Harting Surface Mounted Housing, Size 10 A is designed for robust and reliable industrial applications. This housing features a low construction profile and a single locking lever, ensuring secure and easy installation. Made from high-quality polycarbonate (PC) and stainless steel, it offers excellent durability and resistance to harsh environments.Key Features:Size: 10 ALow constructionSingle locking leverPolycarbonate (PC) and stainless steel materialsSide entry1x Pg 16 cable entryAluminium die-cast hood/housingPowder-coated, RAL 7037 (dust grey)Degree of protection: IP65Ideal for:Industrial automationControl systemsHeavy machineryCompliant with IP65 protection class, this housing ensures maximum protection against dust and water ingress, making it suitable for demanding environments. The aluminium die-cast hood and powder-coated finish provide additional strength and corrosion resistance.

The Hood, Size: 10 B, Low Construction, Single Locking Lever, Side Entry, M20 is a compact and robust solution designed for size 10B applications. The hood boasts a low profile design and is constructed from aluminium die-cast material, which has been powder-coated in RAL 7037 (dust grey) to provide enhanced durability and resistance to corrosion. This product offers a high degree of protection, with ratings of IP65, IP66, and IP67, making it suitable for use in challenging environments. Key Features: Low profile design Single locking lever for easy operation Side entry for convenient installation Includes 1x M20 fitting

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.

The LAPP Universal Bus Module Plug 4+ Shield is a versatile and reliable solution for various industrial applications. This modular connector, part of the EPIC® MC Module series, is designed to offer high flexibility by combining different functions into a single plug. It is suitable for a wide range of applications including plant engineering, light & sound technology, and control engineering.The plug features a robust construction with a copper alloy, gold-plated contacts, ensuring excellent conductivity and durability. The screw termination method supports wire sizes from 0.08 to 1.5 mm², making it easy to assemble and install. With a rated voltage of 30V and a rated current of 1A, this connector is designed to meet the demands of modern industrial environments.The EPIC® MC Module complies with industry standards, offering reliable performance and long service life with a mechanical operation cycle of up to 100 cycles. It operates efficiently within a temperature range of -20°C to +85°C, making it suitable for various environmental conditions. The plug also features a pollution degree of 3, ensuring it can withstand harsh industrial environments.Whether you are working in plant engineering, light & sound technology, or control engineering, the LAPP Universal Bus Module Plug 4+ Shield provides a dependable and flexible solution for your connectivity needs.

Flame resistant, one-touch fitting series KR can be used for a wide range of pressures from a low vacuum up to a pressure of 145 PSI. The use of a special profile ensures positive sealing and reduced resistance when the tube is being inserted. KR fittings are effective when piping in a confined space. The body and threaded portion can turn.