Electric Motors

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 17A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 15hp (at 575V) / 15kW (at 690V) for standards applications and 10hp (at 575V) / 11kW (at 690V) for severe applications. It weighs 4.9kg and its dimensions are, 160mm wide, 275mm high, 190mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

The PSR6-600-70 is a space-saving softstarter designed for reliable motor control in standard industrial applications. With a maximum operational current of 6 A and a wide supply voltage range from 208 to 600 V AC, it supports a rated control voltage between 100 and 240 V AC at 50/60 Hz.Utilizing two-phase control, the PSR6-600-70 provides smooth motor starting and stopping via an adjustable voltage ramp. The integrated bypass contactor reduces heat dissipation and wiring complexity, contributing to efficient energy usage and simplified installation.The unit features a relay output that offers a RUN signal in a normally open (NO) state. Users can easily configure the start and stop ramp times using three front-facing potentiometers.Designed to pair seamlessly with ABB manual motor starters (MMS), the PSR softstarter also supports Fieldbus integration through an optional external adapter and plug.The PSR series represents ABB’s most compact line of softstarters, offering essential functionality for small motors ranging from 3 to 105 A. These softstarters handle up to 100 starts per hour, making them ideal for frequent-start applications such as pumps, fans, compressors, and conveyor systems.

The softstarter PSE105-600-70 is designed for a rated maximum operational current of 105 A, with an operating voltage range spanning from 208 to 600 V AC. It features a two-phase control system that allows for a soft start and stop through a voltage or torque ramp. The device includes built-in bypass for easy installation and energy savings. It also provides a relay output with RUN, TOR, and Event signals in the NO state. The PSE105-600-70 offers functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. The device is equipped with an illuminated display that uses symbols for language neutrality. As an option, you can add an identical external keypad rated at IP66. Communication with the PSE105-600-70 can be achieved through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can use an external adaptor and a Fieldbus plug. The softstarter is a versatile solution suitable for small to medium-sized three-phase motors with nominal currents from 18 to 370 A. Common applications include pumps, fans, compressors, and conveyors.

Square D 2510K motor starting switches provide compact manual On Off control of single or three phase motors or resistance heating loads up to 600 VAC, where overload protection is not required or provided separately. Open type fits industry standard single-gang switch boxes for direct mounting in a wall or machine using any standard cover plate with a standard single cutout. Pilot light option is available. A variety of enclosures are available. Units are UL Listed and CSA Certified for global applications. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This NEMA 1 general purpose enclosure is a surface mounting enclosure. The enclosure has has a 0.5 and 0.75 knockout on the top and bottom. The enclosure is 4.25 inches tall, 2.44 inches wide and 2.75 inches deep. It weighs 0.84 lb. This device is UL Listed and CSA certified.

The softstarter PSR85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The ABB PSR37-600-70 is a compact, reliable solution for managing the start and stop of small three-phase motors. With a rated maximum operational current of 37 A, it can handle a wide range of voltages from 208 V to 600 V AC.This softstarter features a two-phase control soft start and stop through a voltage ramp, ensuring smooth transitions and energy efficiency. It also includes a built-in bypass for easy installation and a relay output for RUN and TOR signals in the NO state. The start/stop ramp and time can be easily set using three potentiometers on the front.The ABB PSR37-600-70 is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available for this purpose. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.This softstarter range is suitable for small three-phase motors with nominal currents from 3 to 105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The PSR105-600-70 Softstarter has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The PSE25-600-70 softstarter is engineered to handle a wide range of applications, offering a rated maximum operational current of 25 A and an operating voltage span from 208 V AC up to 600 V AC. This device features a two-phase control with a soft start and stop through a voltage or torque ramp, ensuring smooth operation and energy efficiency. The PSE25-600-70 is equipped with built-in bypass for easy installation and offers various protection functions such as current limit, kickstart, analog output, end of life (EOL), underload, and locked rotor protection. It also provides a RUN, TOR, and Event signal from a relay output in NO state. To enhance user interaction, the PSE25-600-70 incorporates an illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66 for added convenience. Communication options with the PSE25-600-70 include hardwire inputs Start/Stop or Reset of fault, built-in fieldbus communication Modbus RTU, and an external adaptor and Fieldbus plug. This softstarter is a true general-purpose solution, offering a perfect balance between high starting capacity and cost efficiency.

Product Overview The HALL SENSOR BOX is a specialized component designed for use in the automation industry. It features a straight cable outlet, providing a clean and efficient design. This product is compatible with series 050 to 200 and is suitable for commuting applications. Technical Specifications The HALL SENSOR BOX comes in two primary unit lengths: 2 and 4. It also includes a straight cable polarization determination feature, enhancing its functionality and versatility.

The Mitsubishi MELSERVO-J4 Servo Motor HG-KR is designed for high precision and efficiency in industrial automation applications. With a rated power of 0.2 kW and a rated torque of 0.64 Nm, this servo motor ensures optimal performance for a wide range of motion control tasks. The motor features a maximum torque of 2.2 Nm and operates at a rated speed of 3000 rpm, with a maximum speed of 6000 rpm, making it suitable for dynamic and demanding environments.Equipped with a 22-bit encoder providing a resolution of 4194304 ppr, the HG-KR servo motor guarantees precise positioning and smooth operation. The motor's straight shaft design and integrated brake enhance its versatility and reliability in various applications. With an IP65 protection class, the motor is well-protected against dust and water ingress, ensuring durability in harsh industrial settings.Compliance with international standards such as CE, UL/cUL, EAC, and UKCA further underscores the motor's quality and safety. The Mitsubishi MELSERVO-J4 Servo Motor HG-KR is an ideal choice for engineers and integrators seeking high performance, reliability, and compliance in their automation systems.

The Altistart 22 is a versatile soft starter designed for feeding 3-phase asynchronous motors. It boasts a rating of 88A, a power range from 25HP to 75HP, and a voltage capacity from 230V to 575V AC. This device is ideal for simple and complex machinery such as centrifugal and piston pumps, fans, screw compressors, and material handling equipment. Its slim form factor enhances its adaptability, allowing it to be mounted in various machine frames.The Altistart 22 features an integrated bypass, which reduces noise and minimizes heat dissipation. This feature is particularly beneficial for complex machinery that requires quiet operation and efficient thermal management. Additionally, the soft starter's compatibility with SoMove software allows for easy configuration and setting transfer, facilitating quick spare installation.The Altistart 22 provides smooth starting for your machinery, reducing mechanical stresses and extending their service life. This not only ensures optimal performance but also contributes to cost savings by minimizing downtime and maintenance requirements.

The Schneider Electric Altivar Soft Starter ATS480 is designed for starting and stopping asynchronous motors in a wide range of applications, from 208V to 690V. It meets the requirements of heavy-duty operations with an operational rated current of 38A, catering to motors ranging from 9kW to 30kW based on mains voltage. This soft starter is equipped with advanced features such as torque control (TCS) for efficient acceleration and deceleration. It also includes dynamic braking and DC injection capabilities, making it ideal for stopping high inertia applications. The ATS480 can be connected in-line or inside the delta to reduce operational current. The embedded test routine simplifies commissioning within the delta. With dimensions of 160mm (width) x 203mm (depth) x 275mm (height) and a weight of 4,9kg, it is compact and lightweight. The Schneider Electric Altivar Soft Starter ATS480 is designed to address process, infrastructure, and industrial machine applications. It conforms to IEC/EN60947-4-1 and is certified under CE, cULus, UKCA, CCC, RCM, EAC, and Marine certifications such as DNV, ABS, BV, and CCS. This soft starter shares common display terminals, remote mounting kits, and communication modules with Altivar Drives. It is also compatible with ATS48, sharing the same footprint, fixing, torque control algorithm, I/O, menus, and more. The integration of Altivar Soft Starter ATS480 in EcoStruxure simplifies architecture selection, detailed design, and execution in automation and electrical systems. The Schneider Electric Altivar Soft Starter ATS480 is a Green Premium product that adheres to environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

The Schneider Electric Altivar Soft Starter ATS480 is a high-performance solution designed for starting and stopping asynchronous motors in demanding applications. It operates within a voltage range of 208V to 690V, providing an operational rated current of 62A. This allows it to handle motor loads from 15kW to 45kW, depending on the mains voltage. The ATS480 is designed with digitization and connectivity in mind, meeting cybersecurity standards to simplify project execution and maximize application availability. Its torque control (TCS) feature efficiently manages acceleration and deceleration, while its dynamic braking and DC injection capabilities effectively stop high-inertia applications. The ATS480 can be installed in-line or inside the delta to reduce operational current. Its embedded test routine simplifies commissioning within the delta. With dimensions of 190mm (width) x 247mm (depth) x 290mm (height) and a weight of 8.3kg, it is compact and lightweight. The ATS480 is suitable for use in process, infrastructure, and industrial machine applications. It conforms to IEC/EN60947-4-1 and is certified under various standards including CE, cULus, UKCA, CCC, RCM, EAC, Marine DNV, ABS, BV, and CCS. The ATS480 integrates seamlessly with the Schneider Electric Altivar Drive range, sharing common display terminals, remote mounting kits, and communication modules. It is also compatible with the ATS48, featuring the same footprint, fixing, torque control algorithm, I/O, and menus. The integration of the Altivar Soft Starter ATS480 in EcoStruxure simplifies architecture selection, detailed design, and execution in automation and electrical systems. It is a Green Premium product designed to meet environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 210A in normal duty, it supplies motor from 55kW to 200kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 320mm (width) x 277mm (depth) x 380mm (height) and it weighs 18,2kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 75A in normal duty, it supplies motor from 18,5kW to 55kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 190mm (width) x 247mm (depth) x 290mm (height) and it weighs 8,3kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

The servo motor is part of the Lexium 32 & Motors range, with a power output suitable for various configurations from 0.4kW to 6kW. This particular model offers a maximum mechanical speed of 8000 RPM, highlighting its capability in dynamic applications. Equipped with a single-turn SinCos Hiperface® high-resolution absolute encoder, the motor provides a speed feedback resolution of 131072 points/turn. The product operates at a supply voltage of 480V and features a nominal current of 2.9A, ensuring reliable performance across various industrial environments. Dimensions include a length of 187mm and a motor flange size of 70mm, making it compatible with international standard flange mounts. The shaft features a keyed design, with a diameter of 11mm and a length of 23mm, allowing for secure coupling. Additionally, the motor is rated IP50, providing a degree of protection against dust and moisture. Compatible with the Lexium 32, Lexium 15, and Lexium 05 servo drives, this motor integrates seamlessly into existing systems, ensuring flexibility in application. The natural convection cooling system further enhances its reliability in continuous operation conditions. For reference, the designation code for this product is included in its specifications. The weight of the motor is approximately 2.89kg, facilitating easy installation and integration into machinery.

This product is part of the Lexium 32 & Motors range, an offer of servo motors from 0.4kW to 6kW. The 6-pole AC servo motor features a low moment of inertia with a maximum mechanical speed of 8000RPM and keyed shaft without holding brake. It is an equipped with a single-turn (1,31,072 points/turn) SinCos Hiperface® high resolution absolute encoder. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 4.1A and a maximum continuous power of 1.7W. The shaft dimensions are 14mm (diameter) x 30mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP65 and IP67 rated product. The length of this product is 220mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 3.62kg. This range is compatible with Lexium 32, Lexium 15 and Lexium 05 servo drives. This product is compatible with LXM05AD17M2 at 200V to 240V single phase. It supports 70mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

The Lexium 05 servo motor is part of the Lexium range, offering motors from 0.4kW to 6kW. This 8-pole AC servo motor boasts a low moment of inertia and a maximum mechanical speed of 2500 RPM with a keyed shaft without holding brake.It is equipped with a multi-turn (1,31,072 points/turn x 4096 turns) SinCos Hiperface® high resolution absolute encoder. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 6.6A and a maximum continuous power of 3.14W.The shaft dimensions are 19mm (diameter) x 40mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP65 and IP67 rated product. The length of this product is 240.5mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole.It weighs 7.4kg. This range is compatible with Lexium 32, Lexium 15 and Lexium 05 servo drives. It supports 100mm international standard flange mount with a natural convection cooling system.

This product is part of the Lexium range by Schneider Electric, offering motion servo drives and servo motors. The 8-pole AC servo motor features a low moment of inertia with a maximum mechanical speed of 6000RPM and an IP54 parallel keyed shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder, providing an angular shaft position precise to less than ±1.3 arc minutes. This BSH servo motor satisfies requirements for precision and high dynamic performance due to its low rotor inertia. The motor is compact and offers a high power density. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 3.5A, and a maximum continuous power of 1.6W. The shaft dimensions are 19mm (Diameter) x 40mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP50 rated product. Its dimensions are 168.5mm (Length) x 100mm (Width), centring collar dimensions are 3.5mm (Depth) x 95mm (Diameter) with 115mm circle diameter of the mounting hole. It weighs 4.2kg. This product is compatible with Lexium 32, Lexium 05 and Lexium 15 servo drives. It supports international standard 100mm flange mount with a natural convection cooling system. The encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. The BSH servo motor has a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.

This product is part of the Lexium range, an offer of motion servo drives and servo motors. The 8-pole AC servo motor features a low moment of inertia with a maximum mechanical speed of 6000RPM and IP65 smooth shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder giving an angular shaft position precise to less than ±1.3 arc minutes. BSH servo motor satisfies requirements for precision and high dynamic performance, due to the low rotor inertia. It is compact, and offers a high power density.Key Features:Low moment of inertiaMaximum mechanical speed of 6000RPMIP65 smooth shaft without holding brakeSingle-turn SinCos Hiperface® high-resolution absolute encoderCompact design with high power densityApplications:Precision machineryAutomation systemsRoboticsPackaging machines