Fluid Power & Pneumatics

The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.

The SMC Safety Valve Series VR51 is a crucial component in applications that necessitate the use of both hands during operation. This valve is specifically engineered to meet the stringent requirements set by EN574, ensuring optimal safety and reliability.Operating Pressure Range: The VR51 operates within a pressure range of .25 - 1 MPa, providing a broad spectrum of applicability across various industrial settings.

The VF3000 series, a five port pilot solenoid valve, is designed for high flow capacity in a compact form. It comes with various configurations including manual overrides and electrical entries. The main valve and pilot valve share a common exhaust. This product is part of the SMC Series VF range.

The SV series employs a multi-connector instead of the conventional lead wires for internal manifold wiring. By connecting each block with a connector, changes to manifold stations are greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Manifold sections can be added using a simple release mechanism. Conventional tie-rod base type manifolds are also available. The use of 34 pin connectors allows up to 16 stations with double solenoids.

EX260 series is a compact and cost effective fieldbus solution for output applicable to SMC s most popular directional control valves such as New SY, SV, VQC, and S0700 Series. It can control up to 32 solenoids in one manifold. Available protocols are EtherNet/IP , PROFINET , EtherCAT , PROFIBUS DP , DeviceNet and CC-Link. EX260 series has standard dual port connectivity to eliminate the need of switches or branch connector, reducing wiring and component cost. IP67 enclosure rating ensures protection against dust and washdown environment.

The C85 series single rod, double acting, conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.

The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.

The SINAMICS G130 Power Module IP00 is a robust and reliable solution for industrial applications, designed to handle high power demands with ease. This 3-phase module operates at 380-480 VAC with a frequency of 50/60 Hz, delivering an impressive unit rating of 840 A. It's equipped with a 6-pulse supply without power recovery design, ensuring efficient and reliable performance. The CIM is included, along with a Drive-CLiQ cable without a control module for seamless integration into your system.This power module is not just about high power output, but also about precision and control. It's designed to deliver 450 kW of power, making it an ideal choice for applications that require both high performance and reliability. The IP00 rating ensures that the module can operate in a variety of environments, from industrial settings to harsh outdoor conditions.The SINAMICS G130 Power Module IP00 is more than just a power source; it's a comprehensive solution for your industrial needs. It combines high power output with advanced design features, ensuring that you get the best performance and reliability from your system. Whether you're looking to power heavy machinery or drive complex processes, this module has got you covered.

The SIMATIC S7-300 Digital Input Module with 16 isolated digital inputs is designed for seamless integration into industrial automation systems. This module operates at 24V DC and is equipped with a 20-pole front connector for easy installation. It ensures high performance and reliability, meeting the stringent requirements of modern automation environments.Featuring IEC 61131 compliance, the module supports various input voltage ranges and signal types, making it versatile for different applications. The module's robust design includes optocoupler isolation between channels and the backplane bus, enhancing operational safety and reducing interference.With a typical power loss of 3.5W, the module is energy-efficient and suitable for continuous operation. It can handle up to 16 simultaneously controllable inputs, ensuring efficient processing even in demanding conditions. The module also supports connectable encoders, including 2-wire sensors, providing flexibility in system design.Although the module does not feature diagnostic functions or alarms, it includes a status indicator LED for each digital input, allowing for straightforward monitoring of input states. The module's compact dimensions (40mm width, 125mm height, 120mm depth) and lightweight design (approx. 200g) make it easy to integrate into existing setups.Ideal for use in hazardous locations, the module holds various approvals, including EMV, FM, CCC-Ex, and maritime applications. It complies with environmental standards such as the RoHS directive and REACH, ensuring it meets global regulatory requirements.

The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.

The SINAMICS G120P POWER MODULE PM330 is a high-power component designed for the SINAMICS G120P modular drive system, suitable for demanding pump, fan, and compressor applications. It operates on a 3-phase AC supply of 380-480V (+10%/-10%) and a frequency range of 47-63Hz.

The 6X2,5-G GN distribution block is designed for efficient connectivity in electrical applications. It accommodates a nominal voltage of 450 V and a nominal current of 24 A. The push-in connection method enables quick and secure installation with a conductor cross-section ranging from 0.14 mm² to 4 mm². The adhesive mounting type ensures stable positioning, while the green color indicates its specific application. Each block can bridge with others via the conductor shaft, allowing for flexible configuration using corresponding plug-in bridges available as accessories.Manufactured in Poland, this block supports up to 6 connections in a single row, demonstrating compliance with IEC 60998-2-2 standards. With a maximum load current of 32 A and a maximum total current of 48 A, it is suitable for various industrial settings. The unit dimensions are 16 mm in width, 28.6 mm in height, and 22.7 mm in depth. Designed for a wide operational temperature range of -35 °C to 110 °C, it is built to withstand harsh environments.Additionally, the distribution block is rated for overvoltage category III and has a degree of pollution rating of 3, ensuring reliability under challenging conditions. Its insulating material is made of PA, with a temperature index of 130 °C, providing assurance against thermal stress. The block is also compliant with fire protection standards for rail vehicles and has passed various flammability tests, making it suitable for critical applications.PTFIX 6X2,5-G GN

The PTFIX 6/12X2,5-G BK serves as a distribution block, allowing multiple units to be interconnected through the conductor shaft. Each block is designed to accommodate plug-in bridges, available as accessories. This basic terminal block operates with a nominal voltage of 450 V and nominal current of 24 A. It supports a cross-section range of 0.14 mm² to 4 mm², while the rated cross-section is 6 mm², facilitating effective electrical connections. The mounting type is adhesive, and the block is constructed from black PA material, ensuring durability. It features 13 connections with a single row configuration and adheres to IEC 60998-2-2 standards. The device is suitable for applications where overvoltage protection is necessary, classified under overvoltage category III, with a rated surge voltage of 6 kV. With a compact design measuring 41 mm in width, 28.6 mm in height, and 22.7 mm in depth, the block operates efficiently within a temperature range of -35 °C to 110 °C. It is also rated for humidity levels from 20% to 90% during operation.

The PTFIX 10/18X4-G WH distribution block is designed for reliable electrical connections, supporting a nominal voltage of 450 V and a nominal current of 32 A. The internal bridging design enables efficient power distribution, while the push-in connection method allows for easy installation.This block accommodates a wide range of conductor cross-sections, from 0.2 mm² to 6 mm² for load contacts, and it has a rated cross-section of 10 mm². The adhesive mounting type ensures stable installation, and the white color (RAL 9010) provides a neutral aesthetic.Constructed to meet various standards, the block features a maximum load current of 57 A with a conductor cross-section of 10 mm² and a total maximum current of 63 A across terminal points. It is rated for overvoltage category III and pollution degree 3, ensuring suitable performance in demanding environments.Additional specifications include a flammability rating of V0 according to UL 94, and it can operate within a temperature range of -35 °C to 110 °C. The distribution block is compliant with IEC 60998-2-2, making it suitable for diverse industrial applications.

The potential distributors are designed for reliable electrical distribution with a nominal voltage of 250 V and a current rating of 17.5 A. These distributors feature a push-in connection method, facilitating efficient wiring across four levels: 1st, 2nd, 3rd, and 4th. The rated cross section is 1.5 mm², while the overall cross section accommodates a range from 0.14 mm² to 2.5 mm².For mounting, these distributors are compatible with NS 35/7.5 and NS 35/15 formats. The housing is presented in gray, whereas the connection elements are color-coded in yellow and black, enhancing visibility and organization. Manufactured in Poland, this product aligns with industry standards for quality and performance.

The product is a passive connection sub-base designed for digital I/O applications, featuring a total of 16 channels with one terminal per channel. It supports a control circuit voltage of 24VDC while facilitating straightforward integration with programmable logic controllers through a 20-way HE10 connector.Electrical connections are made via screw terminals, accommodating various wire sizes, including flexible and solid conductors. The tightening torque required for wiring is 0.6 N·m, utilizing a flat screwdriver with a diameter of 3.5 mm. This miniature sub-base also has an IP20 degree of protection and weighs 0.160 kg, making it suitable for diverse industrial environments where quick I/O module connections are essential.It is compliant with several industry standards, certified by DNV, CSA, UL, GL, and EAC. The device is compatible with Modicon M221 Book, TSX Micro, and Modicon Premium controllers, as well as Modicon TM3 and X80 I/O expansion modules. The mounting is facilitated by clips for a 35 mm symmetrical DIN rail and screws for a solid plate with a fixing kit, enhancing its installation flexibility.With a pollution degree of 2 and a rated insulation voltage of 2000 V, this sub-base is engineered to withstand environmental challenges, including temperature ranges from -5°C to 60°C during operation and -40°C to 80°C when stored. The shock and vibration resistance ratings of 15 gn and 2 gn respectively ensure reliable performance even under demanding conditions.

The UL1953 Power Distribution Block is designed to facilitate safe cable splicing, enabling the distribution of primary power into secondary circuits while adhering to stringent electrical codes. This block is compliant with UL508A and the National Electrical Code®, ensuring reliable performance in feeder and branch circuit applications. This model supports a maximum operating temperature of 80 °C and is rated for both AC and DC voltages up to 1000 V. The short circuit ratings vary across classes, with up to 400 kA for Class J, ensuring robust protection in demanding environments. Constructed from glass-filled polycarbonate, the insulators are designed for durability. The optional polycarbonate safety covers enhance safety by providing dead-front protection and include test probe holes for circuit verification. The product line includes features such as optional adder poles for increased versatility, allowing users to customize primary and secondary wire configurations without tools. With a primary and secondary wire range of 500-#4 and standard tin-plated aluminum connectors, this distribution block is engineered for ease of installation and compatibility with both aluminum and copper wiring. The direct screw mounting installation method simplifies setup, making it suitable for various applications in electrical distribution systems.

The Air Circuit Breaker E1.2B 1250 is designed with a four-pole configuration and front terminals. It incorporates a solid-state release mechanism known as Ekip Dip LSIG, ensuring reliable operation in AC applications.This model operates at a rated current of 1250 A and can withstand a rated operational voltage of 690 V AC. Its electrical durability is rated for 8,000 cycles at 440 V and 6,500 cycles at 500 to 690 V, making it suitable for demanding environments.With a rated short-circuit breaking capacity of 42 kA across various voltages, it provides robust protection for installations. The device's mechanical durability is rated for 20,000 cycles, ensuring longevity and reliability.In terms of dimensions, the breaker measures 280 mm in width, 296 mm in height, and 183 mm in depth, with a net weight of 16 kg. It is compliant with IEC standards and features a tightening torque of 45 N·m for secure installation.This product is classified under the designation code E1.2 and adheres to various environmental regulations, including RoHS compliance. Additional features include a high recyclability rate, supporting sustainability initiatives.

This upper housing component, designated as ME 12,5 OTU-MKDSO KMGY, is specifically tailored for PCB terminal blocks that utilize screw connections. With a compact width of 12.6 mm, height of 99 mm, and depth of 45.85 mm, it is suitable for various applications within a DIN rail setup.Manufactured from PA material with a light grey finish (RAL 7035), it exhibits a flammability rating of V0 according to UL 94 standards. The design incorporates provisions for up to 12 positions at a pitch of 3.5 mm, accommodating four connection openings. The absence of ventilation openings allows for a streamlined housing profile.This product is designed to operate effectively within a temperature range of -40 °C to 105 °C, depending on power dissipation, while maintaining operational integrity under various environmental conditions. It meets IEC 60529 standards up to an IP code of IP20, ensuring basic protection against solid objects.The housing supports PCBs with thicknesses ranging from 1.4 mm to 1.8 mm and utilizes a latching mounting mechanism with its lower housing part. It is crucial to follow the application notes available in the download area for optimal assembly and use.

The PTFIX 6X4 BN distribution block is designed for modular configurations, allowing bridging between blocks via the conductor shaft. It has a nominal voltage rating of 450 V and can handle a nominal current of 32 A. The push-in connection method facilitates easy wiring with a cross section range of 0.2 mm² to 6 mm².Mounting options include snapping onto a DIN rail adapter, direct mounting with a flange, or free-hanging installation, providing flexibility in various applications. The block is finished in brown, in accordance with RAL 8028 standards.Constructed for durability, this component complies with multiple safety and performance standards, including IEC 60998-2-2. Its design allows for efficient operation in environments with an ambient temperature range of -60 °C to 110 °C, making it suitable for demanding industrial settings.