Linear Technique

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The legacy MXQ precision slide table is integrated with guides and rails combined with recirculating bearings to isolate the load bearing from the movement of the dual rods and piston seals. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MSQ compact rotary table is ideal for material transfer applications. It incorporates load bearings and a mounting face with a rack-and-pinion style rotary actuator. The seven sizes are 10, 20, 30, 50, 70, 100, and 200 with rotational adjustments from 0-190 degrees, and auto switch capability. Additional features include a hollow shaft and direct load mounting possibility.

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The floating joint series JA (standard) and JAH (heavy duty), can absorb any off-centering or loss of parallel accuracy between the cylinder and the driven body. Because of this, centering is unnecessary, installation time is drastically reduced, and a high level of machining accuracy is unnecessary.

The SMC C85 Mounting Bracket is a high-quality accessory designed for the C85 series cylinders, which conform to ISO 6432 and CETOP RP52P standards. This mounting bracket is essential for secure and efficient installation of cylinders with bore sizes ranging from 8mm to 25mm and strokes from 10mm to 300mm. The unique rod packing design prevents dust entry, making it suitable for extremely dusty environments. The C85 series features abrasion-resistant packings and replaceable nose seals, ensuring exceptional service life.The mounting bracket is available in various types, including clevis, flange, foot, and trunnion, providing flexibility for different installation conditions. The bracket allows for easy fine adjustment of the auto switch position by simply loosening the screw attached to the auto switch. This product is made to order with options such as heat-resistant cylinders and stainless steel construction.Applications include automation systems, manufacturing equipment, and other industrial settings where reliable and precise cylinder mounting is required.

The Festo Linear Actuator DGC-K-25 is designed for precision and reliability in a wide range of industrial applications. Featuring a stroke range of 1 mm to 8500 mm and a piston diameter of 25 mm, this actuator is versatile and adaptable to various operational needs. The actuator operates with double-acting mode and includes pneumatic cushioning adjustable at both ends for smooth and controlled motion.Engineered for flexibility, the DGC-K-25 can be mounted in any position and is compatible with proximity sensors for position sensing. It supports both standard and extended piston variants, and operates within a pressure range of 0.2 MPa to 0.8 MPa (2 bar to 8 bar). The actuator is compliant with CE and UKCA markings for explosion protection, making it suitable for use in Zone 1, Zone 2, and Zone 22 ATEX environments.Constructed with die-cast aluminum covers and NBR and TPE-U(PU) seals, the DGC-K-25 ensures durability and long-term performance. It is also RoHS-compliant and meets VDMA24364-B1/B2-L standards for LABS (PWIS) conformity, making it suitable for use in the food industry. The actuator operates within an ambient temperature range of -10°C to +60°C and supports operation with oil lubrication for extended use.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MGP-AZ is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The air cushions allow the guided cylinder to absorb nearly three times as much kinetic energy as standard rubber bumpers while suppressing noise and vibration at the stroke end. The (A) press fitted high precision ball bushing is suitable for minimizing the actuator s plate displacement. The (L) high precision ball bushing allows for smooth operation that ensures stable travel resistance, suitable for pushing and lifting applications. The (M) carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The legacy MXQ precision slide table is integrated with guides and rails combined with recirculating bearings to isolate the load bearing from the movement of the dual rods and piston seals. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

This actuator serves as a separate standard component compatible with safety position switches featuring a tumbler, specifically models 3SE5312 and 3SE5322, as well as AS-i models 3SF13. It is also applicable for safety position switches that employ separate actuators, including models 3SE51 and 3SE52, along with AS-i models 3SF11 and 3SF12. The actuator is manufactured from die-cast zinc, ensuring durability and reliability in various operating conditions.The actuator adheres to the requirements of IEC 60068-2-27 and is capable of withstanding up to 30g of shock over 11 milliseconds. It also complies with IEC 60068-2-6 standards for vibration, tolerating up to 0.35 mm at 5g. With a typical mechanical service life of 1,000,000 operating cycles, this actuator is engineered for longevity and consistent performance.Operating within a temperature range of -25 to +85 °C, and suitable for storage at temperatures between -40 and +90 °C, it is versatile for various applications. The actuator's design allows for flexible installation in any mounting position, employing screw fastening for secure attachment. It weighs 0.038 kg and features a mechanical active principle, ensuring a reliable operation.

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

The THK SSR20XW1SS Linear Guide Carriage is engineered for precision and reliability in linear motion systems. Designed with a width of 42 mm and a length of 66.5 mm, this carriage is part of the renowned SSR-XW series, known for its exceptional load-bearing capabilities. With a dynamic load rating of 19600 kN and a static load rating of 23.4 kN, it ensures robust performance in demanding environments.This linear guide carriage is ideal for applications requiring high accuracy and smooth motion, such as CNC machinery, automation equipment, and robotics. The SSR20XW1SS model is built to meet stringent industry standards, providing long-lasting durability and consistent operation. Choose the THK SSR20XW1SS for your linear motion needs and experience the benefits of advanced engineering and superior quality.

The SMC MSQB100A Rotary Table features a robust rack and pinion mechanism, ensuring precise and reliable rotary motion. Designed for both basic and high precision applications, this rotary table is ideal for automation systems requiring accurate positioning. The MSQB100A model supports direct load mounting and offers easy adjustment from one direction, enhancing operational efficiency.This rotary table is capable of accommodating auto switches, providing flexibility in control and monitoring. With seven bore sizes available, it can be tailored to meet specific application requirements. The compact design, combined with a low table height, ensures space-saving installation, making it suitable for environments with limited space.Key features include a large rolling element bearing that offers 3 to 4 times higher axial load capacity compared to the CRQ series, and a hollow axis that facilitates easy wiring and piping. The MSQB100A also includes an internal shock absorber, which significantly increases the allowable kinetic energy, ensuring smooth and controlled motion.Compliant with industry standards, the MSQB100A rotary table is built to withstand harsh operating conditions, with a maximum operating pressure of 1.0 MPa and a temperature range of 0 to 60°C. Its double-acting drive and rubber bumper cushioning further enhance its durability and performance.

The legacy MXQ precision slide table is integrated with guides and rails combined with recirculating bearings to isolate the load bearing from the movement of the dual rods and piston seals. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.