Other

The COMBI receptacle, designated as PPC 2,5/1-L BU , operates at a nominal voltage of 500 V and supports a maximum load current of 24 A. It utilizes a push-in connection method, designed for a single…

The PP-H 1,5/S/12 plug is designed for applications requiring a nominal voltage of 500 V and a nominal current of 17.5 A. It features a push-in connection method, allowing for efficient installation…

The cylindrical fuse-link aM, designed with a size of 14x51 and rated for 500VAC at 4A, is tailored for electrical distribution circuit protection and various industrial applications. This fuse-link…

The OT and OTN series general-purpose fuses are designed for low-cost protection of lighting, heating, and non-motor loads. These fuses can safely interrupt short-circuit currents up to 50,000…

The M23 device connector, designated as CA-07S1N126Y00 , features a front mounting design that accommodates a straight configuration and is shielded for both standard and SPEEDCON interlock…

The Coupler connector CA-12S1N129008 is designed for reliable connectivity in various applications. It features a straight M23 configuration with a shielded design, ensuring effective signal…

The FMC 1,5/ 6-ST-3,81 is a printed circuit board connector designed for reliable connectivity. It accommodates a nominal current of 8 A and operates at a rated voltage of 160 V, making it suitable…

The FMCD 1,5/ 3-ST-3,5 PCB connector is designed for reliable electrical connections in various applications. With a nominal cross section of 1.5 mm², it supports a maximum current of 8 A and…

The contact insert, designated as HC-COM-Q08-I-CT-M , is structured with 8+PE positions tailored for power applications. It accommodates a single crimp connection per position, allowing effective…

The SACC-M12FSB-5PL SH IB is designed for data applications, particularly within INTERBUS systems, offering a transmission speed of 500 kbps. This connector includes a straight M12 socket with a…

The coupler connector, designated as SF-7EP1N8A9LB4 , is engineered with a straight long design ideal for M23 standards. It accommodates 4+3+PE positions and utilizes pin-type contacts. The connector…

The Device Connector Front Mounting features an angled rotatable design suitable for standard and SPEEDCON interlock connections. With a thread type of M40, this connector accommodates 6 positions…

The SACC-DSI-FS-4CON-L180/SH RD is a bus system flush-type socket designed for rear mounting, equipped with a 4-position configuration and a red contact carrier. This connector utilizes M12 SPEEDCON…

The M23 coupler connector, designated as CA-07S1N8A90DN , is designed for reliable signal connections with a total of 7 positions. This connector is equipped with a socket type contact utilizing…

The feed-through connector features a nominal cross section of 16 mm² and is designed with a green housing. It can handle a nominal current of 76 A and is rated for a voltage of 1000 V in accordance…

The Pin strip PST 1,0/18-H-3,5 is structured to accommodate a nominal cross section of 1.5 mm² and is colored black. This component supports a nominal current of 8 A, contingent upon the plug…

The UMSTBVK 2,5/6-ST-5,08 is a DIN rail connector featuring a nominal cross section of 2.5 mm² and a maximum nominal current of 12 A. This connector is constructed for a rated voltage of 320 V…

The electronic housing, identified by the designation code DCS 15 M C O S C 7035 , is tailored for 15-inch displays with a central window. It is constructed from ABS material in light gray (RAL 7035)…

The IBS OPTOSUB-F/L-LK-OPC-2MBD serves as a fiber optic adapter specifically for the INTERBUS system, facilitating the conversion of the remote IN interface into fiber optics. This component features…

This 2,5/11 Plug is designed for high-voltage applications, supporting a nominal voltage of 500 V and a nominal current of 24 A . It incorporates 11 positions , facilitating versatile connectivity…