Other

The RC-15P2100 crimp contact is engineered with a contact diameter of 1.5 mm, accommodating a crimp range from 0.5 mm² to 1 mm². This component is produced in Germany and features a pin connection…

This feed-through connector, designated as DFK-PC 16/ 6-ST-10,16 , features a nominal cross-section of 16 mm² and is designed to handle a nominal current of 76 A. The connector operates at a rated…

The FMC 0,5/ 2-ST-2,54 is a PCB connector with a nominal cross-section of 0.5 mm² and a robust design characterized by its black housing. This connector supports a nominal current of 6 A and is rated…

The MCVK 1,5/11-G-3,81 is a DIN rail connector designed for efficient electrical connections. With a nominal cross section of 1.5 mm² , it supports a nominal current of 8 A and operates at a rated…

The PP-H 2,5/ 1 GNYE plug is designed for use in the railway industry, accommodating a nominal voltage of 500 V and a maximum load current of 24 A. Its push-in connection method facilitates…

The terminals for M9XU comb busbar are designed to accommodate rigid or flexible cables with cross-sections ranging from 6mm² to 35mm². These connectors are compatible with the C60BP device, ensuring…

The EH 45-C SS/ABS-PC GY7035 is designed for DIN rail applications, characterized by its tall form factor and a single connection opening located on one side. With dimensions of 45.1 mm in width…

The HCS-T MEDIUM 1W C 1 1 7035 is a handheld housing designed for electronic devices, constructed from ABS material with a light gray finish (RAL 7035). This housing comprises two half shells and two…

The PP 2,5/ 2 plug is designed for reliable electrical connections with a nominal voltage capacity of 800 V and a maximum current rating of 24 A. It utilizes a push-in connection method that allows…

The 3VA24 3P 630A 110KA ETU5-LSIG NUT is a low voltage molded case circuit breaker designed under the IEC standards. With a frame size of 3VA24, it delivers a high breaking capacity (Class C) of…

The Coupler connector CA-16S1N8A9008 is designed for robust connectivity with a total of 16 positions. It utilizes a straight, shielded configuration suitable for standard and SPEEDCON interlock…

The DIN rail connector features a nominal cross-section of 2.5 mm² and is suitable for a maximum nominal current of 12 A. It is designed for a rated voltage of 320 V, compliant with the standards…

This limit switch belongs to the XC Standard range and features a metal end plunger with a nitrile boot. It includes both 1 normally closed and 1 normally open snap action contact with positive…

The SACC-DSI-M12MS-5CON-M16 SH is a specialized device connector designed for sensor and actuator interfaces. With a 5-position configuration, it utilizes M12 SPEEDCON technology and features…

The ECS-B-122X169-S-UV1-V is a screw locking vented enclosure designed for outdoor applications. It is rated IP66/67/69 when used with compatible faceplates, ensuring robust protection against dust…

This limit switch is categorized under the Nema Limit Switches range and functions by converting mechanical motion into an electrical control signal. It features a single pole double throw, double…

The contact insert module, designated as HC-M-06-CT-F , is designed for power applications and accommodates 6 positions, all of which are power contacts. This module utilizes crimp connections…

The BC 107,6 OT 0101 KMGY MOQ80 serves as a modular upper housing part designed for integration within distribution boards, adhering to the standards set by DIN 43880. This housing component measures…

The snap-in markers, designated as UC-EM (19X9), feature a white surface that is unlabeled, allowing for customization through several labeling technologies including BLUEMARK ID COLOR, BLUEMARK ID…

The Marker Strip - ZB 25:UNPRINTED features a white design and is intended for use with terminal blocks measuring 25 mm in width. It allows for personalized labeling using compatible tools such as…