PLC Systems & Hardware

The Siemens ASI A/B Slave module, part number 3RK2200-0DQ00-0AA3, is a compact and robust digital I/O module designed for field operation. This device features 8 digital inputs and is protected by an IP67-rated enclosure, ensuring reliable performance in harsh industrial environments. The module supports A/B slave configuration and offers a maximum current input of 270 mA. Each of the 8 M12 sockets is equipped with Y-II assignment, and the module requires two addresses for operation.Designed for easy integration, the module utilizes M12 screw-type terminals for electrical connections and supports both 2- and 3-wire technology. The input circuit is based on PNP transistors, and the sensor supply is short-circuit and overload resistant, providing a stable and secure connection for sensors.The module's addressing is facilitated through a front addressing socket, and it features clear status displays with yellow LEDs for I/O status and green/red LEDs for AS-Interface diagnostics. The module operates within a voltage range of 26.5 to 31.6 V according to AS-Interface specifications and can withstand ambient temperatures from -25 to +85 °C during operation.This ASI A/B Slave module is ideal for applications requiring reliable digital input handling in demanding environments, such as manufacturing plants, automation systems, and industrial control setups. The mounting plate (part number 3RK1901-0CA00) must be ordered separately to ensure proper installation.

This high level analog input module is part of the Modicon X80 modules. It has 8 isolated analog inputs (15 bits + sign). This module is connected via 28-way removable terminal block. The module offers different ranges of voltage or current for each of the inputs depending on configuration choice. It occupies a single slot on the rack and it has a case which provides IP 20 protection of the electronics.

This Modicon X80 Preformed Cordset is an integral part of Schneider Electric's offerings for M580 and M340 automation platforms. The cordset is designed to facilitate a seamless connection between sub-base and the X80 I/O module. With a length of 3 meters, this cable is equipped with a 25-pin D-sub (DE-09) connector for the sub-base side and a 20-way removable terminal block connector for the module side. The cordset weighs approximately 0.5 kg. The Modicon X80 range is part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe, and secure architecture that reduces maintenance and training costs by using compatible modules with the same spare parts in stock. The cordset is compatible with BMXAMO0802 and ABE7CPA02.

This high level analog input module is part of the Modicon X80 modules. It has 4 isolated analog inputs (16 bits) and is used with sensors or transmitters. This module is connected via 20-way removable terminal block. It performs monitoring, measurement, and process control functions for continuous processes. The module offers different ranges of voltage or current for each of the inputs depending on configuration choice. It occupies a single slot on the rack and it has a case which provides IP 20 protection of the electronics.

The SIMATIC S7-300 Analog Input Module is a high-performance solution designed to provide reliable and accurate input data for industrial automation applications. This module features optically isolated inputs, ensuring safe and stable operation even in harsh environments. It supports up to 2 analog inputs with a resolution of 9/12/14 bits, providing flexibility and precision in data acquisition.The module is compatible with various input types, including U/I/thermocouple/resistor, making it suitable for a wide range of industrial applications. It also includes alarm and diagnostic functions to help users monitor the system's health and performance. The module features a 1x 20-pole connector for easy removal and insertion with active backplane bus.

This 3m long cable is specifically designed to facilitate the Modbus serial link connection in your product integration. It features a robust construction that ensures reliable data transmission. The cable is equipped with one RJ45 and one 15-way male SUB-D connector, providing versatile connectivity options.The RJ45 connector offers a secure and stable connection, while the 15-way male SUB-D connector provides a high-speed data transfer capability. This cable is compatible with Altistart 48, ensuring seamless integration of your devices.

This product is part of the Zelio Logic range, an offer of smart relays for simple automation systems from 10 to 40 I/Os. This connecting cable enables to link Magelis small panel to Zelio Logic smart relay. The length of this cable is 2.5m. This connecting cable is equipped with 3-pin connector and 9-pin terminal block. It offers RS232 physical interface. It is suitable for use with Vijeo Designer software and to link Magelis small panel to smart relay. This product is compatible with Zelio Logic compact and modular smart relay HMISTO501. Simple to select, install and program, Zelio Logic is suitable for all your applications. Flexible, it offers you the choice of 2 ranges, compact or modular, extendable and 2 programming languages (FBD or LADDER). Easy to use, Zelio Logic provides a real alternative to solutions based on cabled logic or specific cards.

Ulepsz swoje rozwiązania automatyzacji dzięki procesorowi Siemens SIMATIC S7-1200 1214C, model 6ES7214-1AG40-0XB0. Ten kompaktowy i wydajny procesor został zaprojektowany z myślą o szerokim zakresie zadań sterowania przemysłowego, oferując zintegrowane I/O i solidną wydajność w kompaktowej konstrukcji.6ES7214-1AG40-0XB0 działa na zasilaniu DC 20,4-28,8 V DC, dzięki czemu nadaje się do typowych przemysłowych systemów zasilania. Posiada rozbudowane wbudowane wejścia/wyjścia, w tym 14 wejść cyfrowych (DI) przy 24 V DC, 10 wyjść cyfrowych (DO) przy 24 V DC i 2 wejścia analogowe (AI) w zakresie od 0 do 10 V DC. Dzięki dużej pamięci programów/danych o pojemności 75 KB procesor ten zapewnia wystarczającą pojemność do złożonej logiki sterowania i obsługi danych. Jego kompaktowa obudowa (DC/DC/DC) sprawia, że idealnie nadaje się do zastosowań, w których przestrzeń w szafie jest na wagę złota. Siemens SIMATIC S7-1200 CPU 1214C to wszechstronny i niezawodny wybór do sterowania małymi i średnimi systemami automatyki, oferujący wydajną wydajność i łatwą integrację.

ET200MP rack - it sits on the U-connector bus in the middle of the rack to power cards to the right of it - it does NOT power the CPU. If you want a standard, S7-1500 Power Module , that sits to the left of the S7-1500 CPU, that powers the CPU, please choose one of the following: 1) 6EP1332-4BA00 - 24V / 3A, or 2) 6EP1333-4BA00 - 24V / 8A. SIMATIC S7-1500, SYSTEM POWER SUPPLY PS 60W 24/48/60V DC, SUPPLIES THE OPERATING VOLTAGE FOR THE S7-1500 VIA THE BACKPLANE BUS

This front connector is specifically designed for the SIMATIC S7-300 40 pole system (6ES7392-1AM00-0AA0). It features 40 single cores with a cross-sectional area of 0.5 mm2, utilizing H05V-K single cores for enhanced performance and reliability.The connector is available in a screw version, providing easy installation and secure connection. It comes packaged in units of 5, with each unit measuring 2.5 meters in length.

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. The digital input module provides 12 inputs with sink (positive) logic. It provides a rated supply voltage of 24V DC, a current consumption of 36mA at 5V DCbus, 73mA at 24V DC all inputs on, a maximum power dissipation of 1.93W. This product is part of a flexible and scalable I/O configuration for automation solutions. There is an insulation between channel and bus at 500Vrms AC and no insulation between channels. It is furnished with single wire for electrical connection. It is an IP20 rated product. Its housing colour is white.It weighs 0.025kg. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. This product is compatible with Modicon LMC058 motion controller and Modicon M258 logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

The SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller is designed for conductive charging of electric vehicles in compliance with IEC61851 mode 3. It supports up to 2 charging points and operates within a temperature range of -30°C to 60°C.This charge controller features 2 Control Pilot, 2 Plug Present, 2 DQ switch contact for contactor, and 2 DI read contact for contactor or connector locking. Additionally, it includes 2 ACT for connector locking suitable for BU Typ BU20-P12+A0+4B and BU20-P12+A4+0B.

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This discrete I/O module has 8 input channels, 8 solid state output channels. It is a discrete I/O module with a discrete input/output voltage of 24V DC, an output current of 0.5A, a maximum power dissipation of 3.7W and current consumption of 67mA at 24V DC, 111mA at 3.3V DC. This product is robust, high quality and based on the latest innovative technology. It offers 447581 hours of MTBF. It is an IP20 rated product. It weighs 0.115kg. It is suitable for medium to large process applications. This product is certified by Merchant Navy, RCM, CSA, EAC, CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This input compatible with 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The discrete input module provides 16 inputs with sink or source (positive/negative) logic. It is an input module with an input voltage of 24V DC and a current consumption of 40mA/5mA at 5V DC via bus connector. It can be used to create configurations with up to 16 inputs. There is an insulation between input and internal logic at 500V AC and non-insulation between inputs. It is furnished with removable spring terminal for electrical connection with pitch 3.81mm adjustment for inputs. It is an IP20 rated product. Its dimensions are 27.4mm (Width) x 84.6mm (Depth) x 90mm (Height). It weighs 0.095kg. This product is certified by CE, CULus and C-Tick. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.

The SIMATIC dp module carrier wide version is designed to accommodate a variety of I/O modules and motor starters ET 200 PRO. This modular system allows for flexible configuration and is sold by the meter. With a length of 2000 mm, it provides ample space for multiple components.The SIMATIC dp module carrier wide version is an ideal solution for applications that require versatility and scalability. It can be easily configured to meet specific needs, making it a flexible choice for various industrial automation projects.

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. The sub-base with plug-in electromechanical relay, provides 16 channels. It has change over contact. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is an IP2x rated product. It weighs 1.3kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABR7S33 plug-in relay. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.

The SIMATIC S7-1500 digital input/output module is engineered for reliable operation in industrial automation systems. It supports 32x24VDC sinking and sourcing inputs, with a typical input delay of 3.2 ms, conforming to IEC 61131 standards. The module features 32 channels arranged in groups of 16, providing flexibility for various applications.The SIMATIC S7-1500 digital input/output module is designed to handle sourcing outputs with a maximum current of 2 A per group at an operating temperature of 60 °C. Its compact design, measuring 35 mm in width, ensures easy integration into existing systems.To complete your setup, consider ordering the necessary cables and terminal blocks as accessories. The SIMATIC S7-1500 digital input/output module is a reliable choice for enhancing the performance of your industrial automation system.

The SIMATIC S7-400 Interface Module Send IM460-3 is a powerful solution designed for distributed connection in industrial automation systems. This module supports coupling distances of up to 102 meters, making it ideal for applications that require long-range communication. It features the C-bus interface, ensuring seamless integration with other SIMATIC S7-400 components.The IM460-3 is a versatile transmitter interface module, capable of handling multiple data streams and providing reliable, high-speed communication. Its robust design and advanced technology ensure optimal performance in demanding industrial environments. The module's compact size and lightweight construction make it easy to install and integrate into existing systems.The SIMATIC S7-400 Interface Module Send IM460-3 is a key component in the SIMATIC S7-400 automation platform, offering enhanced connectivity and data exchange capabilities. Its advanced features and reliable performance make it an indispensable tool for modern industrial automation systems.

This product is part of the Modicon M340 range, an offer of Programmable Automation Controllers (PAC). This connector kit is an connection accessory kit of counter modules. This product is robust, high quality and based on the latest innovative technology. It weighs 0.021kg. It is suitable for medium to large process applications. This kit is compatible with BMXEHC0200 counter module. The kit includes two 16-pin connectors, one 10-pin connector. It is available in set of 5.

SIMATIC STEP 7 ProfessionalV17; upgrade V11..V16-> V17 orV11/2010..V16/2017 -> V17/2021or 2006..2017-> V17/2021 ComboFloating License; EngineeringSoftware in the TIA Portal;also applies for upgrade fromV11 single licenses; softwareand documentation on DVD;license key on USB flash drive;class A; 9 languages: de,en,zhincluded, fr,sp,it,ru,jp ,kr asdownload; executable in Windows10, Windows Server 2016/2019;for configuring of SIMATICS7-1200/1500, S7-300/400/WinAC,SIMATIC Basic Panels*******************************content: set (5x DVD + 1x USB)