Switchgear & Power Supply

The Altivar Machine ATV340 is a robust variable speed drive that can handle 3-phase synchronous and asynchronous motors in open and closed loop control. It is designed for heavy duty applications with a rated power of up to 0.75kW / 1hp and a rated voltage from 380V to 480V AC.This drive is built to withstand harsh conditions, including vibration, shock, non-conductive dust, and high temperatures up to 60°C. It integrates Modbus serial line communication protocols as standard and weighs 1.7kg with dimensions of 85mm wide, 270mm high, and 232.5mm deep.The Altivar Machine ATV340 is suitable for a variety of applications, including packaging, material handling, material working, and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified.Accessories such as encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, and additional EMC filters are available with the Altivar Machine ATV340 drive, depending on the drive rating. It is designed to be mounted in a vertical position (+/- 10°) on a panel, thanks to 4 fixing holes.The Altivar Machine ATV340 is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It can be configured, controlled, and diagnosed directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS relating to environmental protection.

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 525V to 600V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 1.29kg and its dimensions are 105mm wide, 142mm high, 158mm deep. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in three packages. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The Schneider Electric TeSys K AC-3 reversing contactor is a versatile solution designed for motor control applications. It boasts a robust design capable of handling up to 6A and 690V, making it suitable for a wide range of industrial settings. This contactor features a 24V DC coil with a transient suppressor module, ensuring reliable operation even in challenging environments. Additionally, it comes equipped with built-in auxiliary contacts, providing added functionality. The TeSys K AC-3 reversing contactor is compact and easy to install, measuring only 90mm in width. It can be mounted on a DIN rail or using screw fixings, offering flexibility in installation. The contactor also includes pre-wired reversing power connections and a mechanical interlock (without electrical interlocking), enhancing its usability. This product is multi-standard certified, complying with IEC, UL, CSA, CCC, and EAC standards. It is also Green Premium compliant, adhering to RoHS/REACh regulations. This ensures that it meets the highest standards of quality and safety.

The TeSys K Contact Relay, featuring 3 poles (3NO), is designed to cater to motor control applications with a maximum load capacity of 6A/690V (AC-3) and 2.2kW@400V. It boasts a low consumption 24V DC coil with a transient suppressor module, along with a built-in auxiliary contact for added functionality. This relay offers screw clamp terminals for easy connection, ensuring reliable performance even in environments up to 50°C and operating rates of up to 600 cycles/hour in AC-3. Its compact design, measuring just 45mm in width, allows for versatile mounting options such as DIN-rail or screw fixing. The TeSys K Contact Relay is multi-standard certified (IEC, UL, CSA, CCC, EAC) and complies with Green Premium standards (RoHS/REACh), making it an environmentally friendly choice for your applications. With its robust construction and reliable operation, this contact relay is the ideal solution for standard applications.

The TeSys K Contactor, with its 4 poles (4 NO), is designed for non-inductive load control applications. It can manage up to 20A/690V AC-1, making it a reliable choice for standard applications.This contactor comes equipped with a 24V DC coil and does not have built-in auxiliary contacts. It connects via screw clamp terminals, ensuring easy installation and maintenance.With an operating rate of up to 600 cycles/hour and environmental compatibility up to 50°C, this contactor offers durability and reliability. Its compact size (45mm width) allows for flexible mounting options, either on DIN-rail or via screw fixing.This product is certified under multiple standards including IEC, UL, CSA, CCC, EAC, and is Green Premium compliant, adhering to RoHS/REACh directives.

LP1K0910BD3 from Schneider Electric is a 3-pole TeSys K contactor for motor applications up to 4kW@400V. It provides a 24V DC coil with surge suppressor, 1NO built-in auxiliary contact, connection by screw clamp terminals. Very compact, DIN-rail mounting and screw fixing, it procures reliability and durability to standard applications. Available worldwide, multi-standards certified (IEC, UL, CSA, CCC, EAC) and Green Premium compliant (RoHs/Reach). Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

LP1K0901BD is a compact 3-pole TeSys K contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 24V DC coil and 1NC auxiliary contact allowing easy integration to all control systems. LP1K0901BD is a 3-pole TeSys K contactor from Schneider Electric for simple motor applications rated up to 4kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it can be easily integrated into all control systems thanks to its 24V DC coil and 1NC built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 45mm wide, for DIN-rail and panel mounting. Ready for connection to all control systems thanks to a 24V DC control voltage and 1NC built-in auxiliary contact. Optimized for simple power applications. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

TeSys K contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V), and for non-inductive load control applications up to 20A/690V AC-1. It provides a 24V DC coil with transient suppressor module, 1NC built-in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles/hour and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

TeSys K contactor, 4 poles (2NO+2NC), for non-inductive load control applications up to 20A/690V AC-1. It provides a 24V DC coil with transient suppressor module, without built-in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles/hour and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

TeSys K reversing contactor, 3 poles (3NO), for motor control applications up to 6A/690V AC-3 (2.2kW@400V). It provides low consumption 24V DC coils with transient suppressor module, 2NC built-in auxiliary contacts, connection by screw clamp terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

TeSys K contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3 (4kW@400V). It provides a low consumption 24V DC coil with transient suppressor module, 1NC built-in auxiliary contact, connection by spring terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The TeSys K contactor is a 3-pole device designed for motor control applications. It can handle up to 12A/690V AC-3 (5.5kW@400V). The contactor features a low consumption 24V DC coil with transient suppressor module and includes a built-in auxiliary contact. It is equipped with screw clamp terminals for easy connection. This compact device, measuring just 45mm in width, can be mounted on DIN rails or using screw fixings. The TeSys K contactor is certified to multiple standards including IEC, UL, CSA, CCC, and EAC, and is also Green Premium compliant (RoHS/REACh). It offers reliable performance with operating rates up to 600 cycles/hour in AC-3 and can operate in environments up to 50°C. Its durability and reliability make it suitable for standard applications.

TeSys K reversing contactor, 3 poles (3NO), for motor control applications up to 6A/690V AC-3 (2.2kW@400V). It provides 24V DC coil with transient suppressor module, 2NC built-in auxiliary contacts, connection by screw clamp terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

LP2K0610BD is a compact 3-pole TeSys K reversing contactor from Schneider Electric for motor applications. Rated 6A AC-3 2.2kW@400V, it includes a 24V DC coil, 1NO auxiliary contact, a mechanical interlock and a pre-wired reversing circuit. LP2K0610BD is a 3-pole TeSys K reversing contactor from Schneider Electric for simple motor applications rated up to 2.2kW@400V. Very compact, DIN-rail compatible, it is assembled with a mechanical interlock and a pre-wired reversing circuit. It can be easily integrated into all control systems thanks to its 24V DC coil and 1NO built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Ready for connection to all control systems thanks to a 24V DC control voltage and 2NO built-in auxiliary contact. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

The TeSys K Contactor, a compact and reliable solution for motor control applications, is designed to handle up to 12A/690V AC-3 (5.5kW@400V) and non-inductive load control applications up to 20A/690V AC-1. This contactor features a 24V DC coil, 1NO built-in auxiliary contact, and connection by solder pins for printed circuit boards.With operating rates of up to 600 cycles/hour and environments up to 50°C, the TeSys K Contactor ensures reliability and durability in standard applications. Its compact design (45mm width) allows for DIN-rail mounting or screw fixing.This contactor is multi-standard certified (IEC, UL, CSA, CCC, EAC), and it complies with Green Premium standards (RoHS/REACh).

LP2K1210BD is a compact 3-pole TeSys K reversing contactor from Schneider Electric for motor applications. Rated 12A AC-3 5.5kW@400V, it includes a 24V DC coil, 1NO auxiliary contact, a mechanical interlock and a pre-wired reversing circuit. LP2K1210BD is a 3-pole TeSys K reversing contactor from Schneider Electric for simple motor applications rated up to 5.5kW@400V. Very compact, DIN-rail compatible, it is assembled with a mechanical interlock and a pre-wired reversing circuit. It can be easily integrated into all control systems thanks to its 24V DC coil and 1NO built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Ready for connection to all control systems thanks to a 24V DC control voltage and 2NO built-in auxiliary contact. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

TeSys K contactor, 4 poles (4NO), for non-inductive load control applications up to 20A/690V AC-1. It provides a low consumption 24V DC coil with transient suppressor module, without built-in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The TeSys K Reversing Contactor is engineered to provide efficient and dependable motor control in diverse applications. This unit exhibits a rating of 9A AC-3 at 4kW @ 400V and incorporates a 24V DC coil, a single normally closed (1NC) auxiliary contact, a mechanical interlock for enhanced safety, and a pre-wired reversing circuit configuration. Designed with a compact footprint, it facilitates straightforward installation via DIN rail or panel mounting within existing control systems. The device’s robust design incorporates a 3-pole construction optimized for space efficiency. It is rated to handle loads up to 9A AC-3 at 4kW @ 400V and operates on a 24V DC coil voltage. The inclusion of an auxiliary contact provides additional functionality, while the mechanical interlock contributes to operational safety. The TeSys K reversing contactor finds application in various industries requiring dependable motor control solutions. Its adherence to international standards including IEC, UL, CSA, CCC, EAC, and Marine certifications, alongside its Green Premium certification (RoHS/Reach compliant), confirms its commitment to both performance and environmental responsibility.

TeSys LRK thermal overload relay, 16A/690V, thermal setting range 12-16A, tripping class 10A, for protection of 3-phase motors 7.5kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test slide switch for simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K16. Mounting on DIN rail, separated from the contactor, with use of a terminal block LA7K0064 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).

TeSys K contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V), and for non-inductive load control applications up to 20A/690V AC-1. It provides a 24V DC coil with transient suppressor module, 1NO built-in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles/hour and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).