Switchgear & Power Supply

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 110 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as stanard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactors are designed for seamless integration into control systems, catering to a wide range of applications. They are available in multiple ratings, supporting inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps.This particular 4 pole IEC contactor is suitable for mounting on DIN rail or directly on a panel. It features four normally open power contacts with an 80A resistive load rating. The contactor is equipped with a 240 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard.The contactor's dimensions are 4.80 inches in height, 2.76 inches in width, and 4.72 inches in depth. It weighs approximately 2.54 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and it meets the RoHS/REACh requirements, making it a Green Premium product.

The 700V Size 14x51, 22x58 A70QS - High-Speed Semiconductor Fuses are an integral part of the A70QS product line, known for their reliability in various applications. These fuses are rated for 690VAC and 700VDC, ensuring compatibility with a wide range of equipment. With an interrupting rating of 200kA at AC and 100kA at DC, these fuses provide superior protection against short circuits. They are capable of handling a 10 to 800 A ampere range, making them suitable for small inverter drives, UPS systems, and solid-state relays. Designed to be robust, these fuses have a ceramic body and utilize a ferrule connection terminal type. They comply with IEC 269-4 standards and are UL recognized, reflecting their adherence to stringent safety and performance criteria. The fuses also feature an 890 VDC rating for capacitor discharge applications, supporting a 2.5ms time constant, making them versatile for various applications. These fuses ensure improved protection and performance due to their superior I²t characteristics, which enhances their suitability for motor drives and similar equipment operating at 700V or less.

The Plug-in Relay Socket Type N is engineered for compatibility with 8501K relays and 9050JCK timers, accommodating eight tubular pins. Its design allows for mounting on a 35mm DIN rail or directly onto a panel, providing flexible installation options.This socket employs double tiered screw clamp terminals, ensuring secure electrical connections while conserving panel space with stacked terminals. Its dimensions are 77.5 mm in height, 36 mm in width, and 36 mm in depth, making it a compact solution for various applications.The relay socket is UL component recognized and CSA certified, confirming its compliance with safety standards. It is also designed in accordance with environmental regulations, being mercury-free and free from toxic heavy metals. For further compliance, the product meets the EU RoHS Directive and offers a sustainable profile.

The Multi9 C60SP functions as a low voltage miniature circuit breaker (MCB) featuring three protected poles and a rated current of 13A. Its tripping curve is designated as C, providing specific operational characteristics. This breaker exhibits a rated short circuit breaking capacity of up to 10kA at 415VAC, conforming to the EN/IEC 60947-2 standard, as well as meeting UL1077 requirements. It is compliant with both industrial standards (EN/IEC 60898-1) and residential standards (EN/IEC 60947-2), ensuring reliable protection against electrical hazards. Designed for original equipment manufacturers (OEM) and control panel builders, the Multi9 C60SP offers protection against overload, short circuits, and earth leakage. The electrical endurance is rated for up to 10,000 cycles, while the mechanical endurance reaches 20,000 cycles, ensuring durability in demanding environments.With an operational voltage of 240VAC and rated insulation voltage of 500VAC, it operates efficiently within a temperature range of -30°C to 70°C. The device can be mounted on a DIN rail, and its compact dimensions of 54mm width, 81mm height, and 72mm depth make it suitable for various installations. The product color is light grey (RAL7035), and it has an IP20 protection rating according to IEC/EN 60529.

The general purpose relay, designed for hazardous locations, is part of the SE Relays 750R series. It employs an octal terminal configuration, ensuring reliable mounting while offering excellent structural integrity. The relay is hermetically sealed, making it suitable for wash down conditions and compliant with UL Class I Division 2 standards for Groups A, B, C, and D. This relay's contacts are rated for 12A resistive at both 120VAC and 240VAC, as well as 1/3hp at 120VAC and 1hp at 277VAC, which makes it highly applicable for automation panels and control systems. The use of silver alloy in the DPDT contact configuration enhances durability and minimizes oxidation, leading to an extended shelf life and effective control of separate circuits. The socket-mounting option facilitates installation and maintenance, and the relay is compatible with various protection modules, hold-down clips, and accessories. Additionally, the mechanical standard flag indicator provides clear visibility of the relay's status during testing or operation. This product operates effectively within a temperature range of -40 to 55 °C and has a mechanical durability of up to 10 million cycles.

The CP-E 5/3.0 power supply operates with a wide input voltage range of 90-264 V AC and 120-375 V DC, with a rated input voltage of 100-240 V AC. It provides a rated output power of 15 W, making it suitable for various applications requiring stable power supply. The output voltage can be finely tuned between 4.5 to 5.75 V DC, allowing for flexibility in different operational contexts. The output characteristic is designed in hiccup-mode, which enhances reliability during overload conditions.This unit supports parallel operation, enabling redundancy to ensure continuous power supply, and a dedicated redundancy unit can be acquired as an accessory. The product complies with several standards, including ANSI/ISA-12.12 and IEC/EN 61000 series, ensuring it meets necessary safety and performance criteria. It features a compact design with dimensions of 22.5 mm in width, 90 mm in height, and 114 mm in depth, weighing 0.144 kg.The CP-E 5/3.0 is suitable for mounting on DIN rails TH35-15 or TH35-7.5, adhering to IEC 60715 standards. It is rated for operation in ambient temperatures ranging from -20 to +70 °C and can be stored at temperatures between -25 and +85 °C, with a maximum permissible operating altitude of 5000 m.This device is classified under the object classification code T and conforms to RoHS regulations, ensuring compliance with EU directives regarding hazardous substances.

The basic frame for the MasterPact MTZ1 10H1 drawout circuit breaker is engineered to accommodate a rated current of 1000A. It operates at a maximum voltage of 690VAC across 50/60Hz networks. This frame exhibits a breaking capacity of 42kA (Icu) at 415VAC and is compliant with international standards including IEC/EN 60947-1 and IEC/EN 60947-2. MasterPact MTZ, as a high current air circuit breaker, is suited for safeguarding electrical systems against overloads, short circuits, and ground faults.Measuring 288mm in width, 322mm in height, and 291mm in depth, the frame must be paired with the appropriate chassis and the MicroLogic X control unit, which is sold separately. Notably, the device is designed for a variety of applications and can be integrated into EcoStruxure architectures, enhancing both safety and energy efficiency.This circuit breaker frame is capable of withstanding operational environments ranging from -25°C to 70°C and is rated for a mechanical durability of 12,500 cycles with periodic maintenance. Additionally, it has a rated insulation voltage of 1000V and an impulse withstand voltage of 12kV, ensuring robust performance.

The CR-M048DC4LG is a miniature interface relay designed for pluggable applications, featuring a rated control supply voltage of 48 V DC. It is equipped with four SPDT (c/o) output contacts, which are gold-plated and rated for 250 V at 6 A, ensuring reliable performance in various conditions.Notably, this relay incorporates a blue test button that allows for manual actuation and the locking of output contacts, along with an integrated LED indicator for operational feedback. The relay meets several standards, including IEC/EN 61810-1 and UL 508, and is compliant with the American Recovery and Reinvestment Act (ARRA) and the Buy American Act (BAA).Operating within a temperature range of -40 to +70 °C, the relay can function effectively at altitudes up to 2000 m without derating. It has a degree of protection rated at IP40, making it suitable for industrial environments. Accessories such as standard sockets, logic sockets, and pluggable function modules are available.

This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process.

The SIRIUS soft starter is a robust and reliable solution designed to provide seamless control over motor starting. It offers a range of values at 400 V and 40 °C standard: 29 A, 15 kW. For higher power requirements, it also provides inside-delta values of 50 A, 22 kW for 200-460 V AC, 230 V AC spring-type terminals. This product is equipped with CAGE clamp terminals for easy and secure connection. Please note that this model has been phased out, and the preferred successor type is >>3RW5516-3HA14<<.

The A2D-R fuses in the Amp-Trap 2000 series deliver IEC Type 2 'no damage' protection for mains, feeders, and branch circuits catering to both motor and non-motor loads. Rated for 250V AC and DC, these fuses feature an ampere rating of 7A and are designed for time-delay applications, ensuring they can quickly interrupt extreme fault conditions while accommodating motor in-rush currents.With a maximum interrupting rating of 200 kA, the A2D-R fuses prevent damage to critical components like motor starters and switches. They can effectively replace older 250V Class H, K, or RK5 fuses already in use. The fuses are constructed with a poly tube body and utilize tin-plated copper for the connection terminals, ensuring reliable performance.

This Micrologic 2.2 is a 3 poles 3d electronic trip unit used on Compact NSX 160/250 circuit breakers. This 160A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. Micrologic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and Compact NSX basic frame.

TeSys D contactor, 3 poles (3NO), for switching 3-phase capacitor banks up to 25kVAR@400V 50Hz (42kVAR@690V). It provides a 240V 50/60Hz AC coil, 1NO+2NC instantaneous auxiliary contacts, with front mounted early make poles and pre-wired damping resistors for current limitation. For operating rates until 240 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Certified IEC 60947 and compliant with shunt capacitors standard IEC 60831, Green Premium product (RoHS/REACh).

TeSys F contactor, 3 poles (3NO), 500A/1000V AC-3, for motor applications up to 250kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Introducing the ABB SSR32, a robust safety relay designed to meet the highest standards of industrial safety. This device features 2 Normally Open (NO) contacts and 2 Delayed Normally Open (DNO) contacts, providing reliable protection in various applications.Powered by a +24 VDC supply voltage, the SSR32 is designed for compatibility with a wide range of systems. Its compact size and robust construction make it an ideal choice for installations where space is at a premium.

The iEM3300 energy meter is part of the Acti9 iEM3000 series, specifically engineered for three-phase applications and mounted on DIN rails. It features a high-visibility LCD display and includes local signaling with a green LED indicator for power-on status as well as a flashing yellow LED for accuracy checks. This meter is capable of measuring both Active and Reactive Power along with Active and Reactive Energy, making it suitable for sub-billing and partial metering applications.It operates on networks with a frequency of 50Hz or 60Hz and can handle supply voltages ranging from 100 to 277VAC or 173 to 480VAC. With a line rated current of up to 125A via direct connection, it supports multiple configurations including Single Phase and Neutral, Three Phase, and Three Phase with Neutral. The device adheres to various accuracy standards, including class 1 for Active Energy according to IEC 62053-21 and IEC 61557-12.The unit is built to withstand an ambient temperature range of -25°C to 70°C during operation, and -40°C to 85°C for storage, with an IP degree of protection rated at IP40 for the front panel and IP20 for the body. Its dimensions are 126 mm in width, 69 mm in depth, and 103 mm in height, and it weighs 260 g. The iEM3300 energy meter is certified under multiple standards including CE and UL, ensuring compliance with safety and performance regulations.

The RSO 30/DV 5-24V CC/SC is a solid-state relay designed for efficient control in various applications. It operates at a rated control voltage of 5 to 24 V DC ±20% and supports a rated switching voltage range of 2 to 60 V DC, ensuring compatibility with diverse systems. This relay can handle a continuous current of 3 A, making it suitable for moderate loads.With a compact design, the relay measures 11 mm in width, 80 mm in height, and 54 mm in depth, weighing 38.3 g. It utilizes a screw connection for wire connections, accommodating a clamping range of 0.5 to 2.5 mm². The device features a nominal control current of 5 mA DC and includes a green LED for status indication.The relay is rated for a maximum switching frequency of 500 Hz and has a switch-on delay of less than 300 µs and a switch-off delay of less than 1 ms. It is equipped with a free-wheeling diode for protective circuitry on the load side. Additionally, the relay conforms to CE and ROHS standards, and the insulation coordination is rated at 300 V with a surge voltage category of III, ensuring reliable operation in various environmental conditions.Operating temperatures range from -25 °C to 40 °C, while storage temperatures can vary between -40 °C and 85 °C, supporting usage in a wide range of environments. The relay is compliant with several standards, including DIN EN 50178, making it a well-suited component for industrial applications.

The Protistor BS88-4 17x49 gR 690VAC fuses are engineered for superior breaking capacity, ensuring effective protection for power semiconductors in accordance with IEC standards 60269-1 and -4. These fuses operate within a voltage rating of 690V and are classified under gR class, supporting current ratings between 12 and 90A.They offer enhanced safety features, facilitating the clearing of overloads and promoting selective coordination with distribution circuit fuses of aR class, which accommodate current ratings up to 100A, as per VDE 636-23 and IEC 60269-4 standards. Connections adhere to German standard DIN 43653/00C and British standard BS88-4.All units are UL Recognized and comply with ROHS and CE regulations, ensuring they meet stringent safety and environmental standards. The fuses are lead-free as per technical services guidelines.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 208 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.