Valves & Manifolds

The IFM Proximity Sensor AC5228 is an advanced industrial automation product, engineered to enhance manufacturing processes. This sensor is capable of providing accurate monitoring and control of temperature, pressure, and flow in even the most challenging industrial environments.With its user-friendly interface, the AC5228 can be easily configured and integrated into existing automation systems. Its advanced diagnostics and fault detection capabilities ensure maximum uptime and productivity, making it an essential tool for optimizing production efficiency and quality in various industries such as automotive, food and beverage, and pharmaceuticals.

This sub-base is part of the Modicon ABE7 series, specifically designed for the Telefast pre-wired system. It accommodates 16 channels, each equipped with a switch disconnector, facilitating efficient control signal management for PLC systems. The output sub-base operates within a supply voltage range of 19V to 30V and includes screw clamp terminals ensuring secure electrical connections. With a compact design, the dimensions are 211 mm in width, 74 mm in depth, and a height of 89 mm. This unit has a net weight of 0.67 kg and is rated at IP2X, providing a degree of protection suitable for various industrial applications. Installation is straightforward, utilizing clips for a 35mm symmetrical DIN rail or screws for solid plate mounting. This product’s exceptional shock and vibration resistance, rated at 15 gn and 2 gn respectively, makes it suitable for demanding environments. The Modicon ABE7 designation signifies a streamlined approach to wiring in automation systems, enhancing operational simplicity. Certified by multiple international standards including GL, CSA, and UL, this sub-base meets rigorous requirements for environmental and operational safety. It is also compliant with various sustainability regulations, ensuring minimal environmental impact.

The power distribution block is designed for terminating wires in compliance with NEMA standards. It comprises a two-pole configuration with one lug opening on the line (main) side and another on the load (branch) side.The line side lug accommodates either one or two #14 to 2/0 copper or aluminum wires, while the load side lug supports one #14 to 2/0 copper or aluminum wire. Both lugs are constructed from aluminum and are rated for a maximum current of 175 amperes for copper connections and 135 amperes for aluminum. Additionally, these lugs can handle operational voltages up to 600 volts.Constructed with a general-purpose phenolic housing, this distribution block is UL component recognized and CSA certified, ensuring compliance with safety standards. The unit operates effectively within an ambient temperature range of -40 to 302 °F and can be surface mounted. It is crucial to note that the product is compliant with various sustainability regulations, including RoHS and REACH, and is free of hazardous substances above specified thresholds. The product's rated service breaking capacity is 65 kA as per UL 508 A standards, making it suitable for various industrial applications. Compatibility is maintained with the 9080LB22 series.

The CAMOZZI EN531-16-W53 is a compact solenoid-operated directional control valve designed for applications with limited installation space, allowing close proximity to actuators. This 5/2 monostable valve returns to its initial position when the 24VDC 2W solenoid coil is de-energized. It features G1/8 port connections and operates within a pressure range of 2.5 to 10 bar. The aluminum body ensures durability in industrial environments. Part of the CAMOZZI EN series, known for their reduced dimensions and suitability for compact machine designs in automation and robotics.

The SMC SYA series offers a variety of air operated valves with 5 ports. These valves are available in body ported or base mounted styles and use the same manifolds as series SY for types 20, 41, 42, and 45. One-touch fittings are available on body ported types. The thread types offered include Rc, G, NPT, and NPTF. This product is a reliable choice for industrial applications requiring precision and durability.

The SV series employs a multi-connector instead of the conventional lead wires for internal manifold wiring. By connecting each block with a connector, changes to manifold stations are greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Manifold sections can be added using a simple release mechanism. Conventional tie-rod base type manifolds are also available. The use of 34 pin connectors allows up to 16 stations with double solenoids.

The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.

The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.

The SYJA500 & 700 Series 3-Port Air Operated Valve offers a compact and efficient solution for various pneumatic applications. Designed for both manifold and single valve configurations, this valve series provides exceptional design flexibility and minimizes space requirements. The low power pilot solenoid design (0.5 watts standard) significantly reduces thermal heat generation, enhancing performance and lowering operating costs. The SYJA valve series supports direct control by PLC output relays and is available with lights and surge suppression for all electrical connections.Featuring a body ported design, the SYJA valve series is compatible with the same manifolds as the SYJ300/500/700 series. The valves can be configured on base-mounted manifolds or individually on subplates, offering a wide range of engineering solutions. Key benefits include sonic conductance C [0.9 to 2.5 dm3/(s·bar)] and a rubber seal for reliable performance. The SYJA500 & 700 series is suitable for applications requiring a compact, lightweight, and efficient air operated valve.

EX260 series is a compact and cost effective fieldbus solution for output applicable to SMC s most popular directional control valves such as New SY, SV, VQC, and S0700 Series. It can control up to 32 solenoids in one manifold. Available protocols are EtherNet/IP , PROFINET , EtherCAT , PROFIBUS DP , DeviceNet and CC-Link. EX260 series has standard dual port connectivity to eliminate the need of switches or branch connector, reducing wiring and component cost. IP67 enclosure rating ensures protection against dust and washdown environment.

The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.

The VF3000 series, a five port pilot solenoid valve, is designed for high flow capacity in a compact form. It comes with various configurations including manual overrides and electrical entries. The main valve and pilot valve share a common exhaust. This product is part of the SMC Series VF range.

The SV series employs a multi-connector instead of the conventional lead wires for internal manifold wiring. By connecting each block with a connector, changes to manifold stations are greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Manifold sections can be added using a simple release mechanism. Conventional tie-rod base type manifolds are also available. The use of 34 pin connectors allows up to 16 stations with double solenoids.

EX260 series is a compact and cost effective fieldbus solution for output applicable to SMC s most popular directional control valves such as New SY, SV, VQC, and S0700 Series. It can control up to 32 solenoids in one manifold. Available protocols are EtherNet/IP , PROFINET , EtherCAT , PROFIBUS DP , DeviceNet and CC-Link. EX260 series has standard dual port connectivity to eliminate the need of switches or branch connector, reducing wiring and component cost. IP67 enclosure rating ensures protection against dust and washdown environment.

The UL1953 Power Distribution Block is designed to facilitate safe cable splicing, enabling the distribution of primary power into secondary circuits while adhering to stringent electrical codes. This block is compliant with UL508A and the National Electrical Code®, ensuring reliable performance in feeder and branch circuit applications. This model supports a maximum operating temperature of 80 °C and is rated for both AC and DC voltages up to 1000 V. The short circuit ratings vary across classes, with up to 400 kA for Class J, ensuring robust protection in demanding environments. Constructed from glass-filled polycarbonate, the insulators are designed for durability. The optional polycarbonate safety covers enhance safety by providing dead-front protection and include test probe holes for circuit verification. The product line includes features such as optional adder poles for increased versatility, allowing users to customize primary and secondary wire configurations without tools. With a primary and secondary wire range of 500-#4 and standard tin-plated aluminum connectors, this distribution block is engineered for ease of installation and compatibility with both aluminum and copper wiring. The direct screw mounting installation method simplifies setup, making it suitable for various applications in electrical distribution systems.

The accessory is designed for use with PowerPact H circuit breakers, allowing for the connection of secondary disconnecting blocks that can accommodate up to nine wires each. It features a moving part linked to the circuit breaker via a support, as well as a fixed part mounted on the plug-in base, which includes connectors suitable for wire sizes up to 14 AWG (2.5 mm²).With a capacity to support various load wire connections, this product serves as an efficient alternative to standard distribution blocks, optimizing space and installation time. The field-installable kit contains a tin-plated aluminum lug, connectors, and all necessary mounting hardware, ensuring compatibility with UL 508 Industrial Control applications and UL 1995/CSA C22.2 No. 236 for heating and cooling equipment.Notably, it is designed for circuit breakers rated from 15A to 100A, maintaining compliance with environmental regulations, such as being mercury-free and PVC-free. The product is built to meet stringent standards, making it a reliable choice for heavy-duty commercial and industrial applications.

Finger valve series VHK has a large effective area of 2.0 to 17.5mm . This series begins with a minimum tube O.D of 4. The valve direction clearly indicates whether the valve is open or closed (shut to open is counter- clockwise). Classification of knob by color difference facilitates distinction between 2 port valves (gray) and 3 port valves (blue). The optional flame resistant model s knob, whether using the 2 or 3 port valve, is red.

The VH Series Rotary Hand Valve is a compact and versatile solution designed for applications requiring manual directional control. With its variety of flow rates, this valve can be used in a wide range of industries. The slide ring design enhances its ease of operation while ensuring high tolerance to contamination through its self-cleaning wiping action.

One-touch fitting manifold series KM has 6 different model options available. Male thread and female thread options available on certain models. Tube material includes nylon, soft nylon and polyurethane.

Series VR1210/1200 shuttle valve is a 3 ported valve with one output and 2 pneumatic signal and input ports. Output is always supplied by high pressure inlet. The VR12**F series are interrupters for control of air pressure signal system lines. Piping is possible in any position and the one-touch fittings make piping connections simple. Time delay valve series VR2110 with its combination of adjustable orifice and fixed flow allows transmission of a pneumatic signal after a fixed time period.